Abstract

Near infrared (NIR) spectroscopy provides a rapid method for estimating several important wood properties of 10 mm sections of radial wooden strips. Successful calibrations have been obtained with NIR spectra collected from 3 to 16 consecutive 10 mm sections of the same wood core. The success of these calibrations might be due to an autocorrelation that exists between the adjacent sections of a core. In this study, we compared calibrations with spectra collected from consecutive 10 mm sections to calibrations obtained with spectra collected from unrelated 10 mm sections. Very similar calibration statistics were obtained with both sets of spectra, demonstrating that existing calibration success is not due to an autocorrelation.

© 2005 NIR Publications

Optical properties of drying wood studied by time-resolved near-infrared spectroscopy

Keiji Konagaya, Tetsuya Inagaki, Ryunosuke Kitamura, and Satoru Tsuchikawa
Opt. Express 24(9) 9561-9573 (2016)

Determination of true optical absorption and scattering coefficient of wooden cell wall substance by time-of-flight near infrared spectroscopy

Ryunosuke Kitamura, Tetsuya Inagaki, and Satoru Tsuchikawa
Opt. Express 24(4) 3999-4009 (2016)

Wood quality of Chinese zither panel based on convolutional neural network and near-infrared spectroscopy

Yinglai Huang, Shiyu Meng, Peng Zhao, and Chao Li
Appl. Opt. 58(18) 5122-5127 (2019)

Measurement of the optical properties of a two-layer model of the human head using broadband near-infrared spectroscopy

Olivia Pucci, Vladislav Toronov, and Keith St. Lawrence
Appl. Opt. 49(32) 6324-6332 (2010)

Accurate and rapid detection of soil and fertilizer properties based on visible/near-infrared spectroscopy

Zhidan Lin, Rujing Wang, Yubing Wang, Liusan Wang, Cuiping Lu, Yang Liu, Zhengyong Zhang, and Likai Zhu
Appl. Opt. 57(18) D69-D73 (2018)