Abstract
In this paper, we present a novel, to our knowledge, method for the fabrication of slotted surface gratings for buried heterostructure (BH) lasers. In the device fabrication process, SiO2 strips needed for InP current blocking layer growth are reused for the formation of slot grating pattern masks. In the following growth of the p-InP cladding layer, because the slot areas are covered by SiO2, the InP material is grown selectively in only the areas outside the slot areas, forming slots of the surface gratings in the p-InP layer at the same time as the cladding layer growth. Single longitude mode BH lasers having slotted surface gratings have been fabricated successfully, and the spectra show higher than 40 dB side mode suppression ratio (SMSR). The adoption of the method helps to simply the device fabrication and thus lower the device fabrication cost notably.
© 2024 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Jing Guo, Huan Li, Xinkai Xiong, Daibing Zhou, Lingjuan Zhao, and Song Liang
Opt. Lett. 49(2) 286-289 (2024)
Qinxing Huang, Jun Zheng, Yupeng Zhu, Xiangquan Liu, ZhiPeng Liu, Yazhou Yang, Jinlai Cui, Zhi Liu, Yuhua Zuo, and Buwen Cheng
Opt. Lett. 49(5) 1365-1368 (2024)
Yongming Zhao, Liqiong Deng, Feng Wu, Zhihua Zheng, Pengcheng Jian, Weijie Liu, Zhenyu Chen, Shizhou Tan, Meng Peng, Wei Guo, Changqing Chen, and Jiangnan Dai
Opt. Lett. 49(4) 1061-1064 (2024)