Abstract
This paper presents the design and characterization of a fully-integrated receiver based on single-photon avalanche diodes (SPADs) with nanosecond dead time for high-speed high-sensitivity optical wireless communication (OWC). The receiver consists of a 4x4 SPAD array that is based on a p-well/deep n-well (DNW) structure, and each SPAD is integrated with a tunable front-end circuit to perform quench and reset. In addition, an OR tree is designed to combine the 16 channels of output from the front-end circuits to generate a single data stream for signal processing, and an output buffer is implemented as the interface to drive 50-Ω loading for testing purpose. Fabricated in a standard 180 nm CMOS process, the receiver achieves a minimum dead time of about 2.5 ns. Bit error rate (BER) measurement of the implemented receiver indicates a sensitivity of −31.6 dBm at 100 Mb/s for a BER of 2 × 10−3 and a wavelength of 520 nm, where on-off keying (OOK) modulation and a 215-1 pseudorandom binary sequence (PRBS-15) are employed. To recover the transmitted data stream from the received signal, a signal processing flow specific for SPAD-based receivers is proposed and implemented.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription
Add to BibSonomy