Abstract

A fabrication tolerant polarization rotator (PR) building block is added to our generic photonic integration technology. Using asymmetric waveguides, we propose a PR with guided modes that do not enclose a 45° angle with the substrate. Rather, we find that polarization performance and loss can be improved substantially by allowing the mode angles to vary along the device. We numerically optimize PR designs, targeting at high extinction and high fabrication tolerance. The optimization makes use of the Jones formalism and the fact that Jones calculus is numerically much faster than beam propagation methods. A comparison of our Jones model and commercial simulation software shows excellent agreement. Fabricated devices show a polarization extinction between 10 and 14 dB across different wafers, at an excess loss of 1 dB. Compared to PR designs without tapers, the loss is 3 dB lower and the polarization extinction is now reproducible from wafer to wafer.

© 2019 IEEE

Fabrication tolerance of asymmetric silicon-on-insulator polarization rotators

Henghua Deng, David O. Yevick, Chris Brooks, and Paul E. Jessop
J. Opt. Soc. Am. A 23(7) 1741-1745 (2006)

Integrated polarization beam splitter with relaxed fabrication tolerances

D. Pérez-Galacho, R. Halir, A. Ortega-Moñux, C. Alonso-Ramos, R. Zhang, P. Runge, K. Janiak, H.-G. Bach, A. G. Steffan, and Í. Molina-Fernández
Opt. Express 21(12) 14146-14151 (2013)

Ultracompact and fabrication-tolerant integrated polarization splitter

A. Hosseini, S. Rahimi, X. Xu, D. Kwong, J. Covey, and R. T. Chen
Opt. Lett. 36(20) 4047-4049 (2011)

Fabrication tolerant and broadband polarization splitter-rotator based on adiabatic mode evolution on thin-film lithium niobate

Ranfeng Gan, Lu Qi, Ziliang Ruan, Jie Liu, Changjian Guo, Kaixuan Chen, and Liu Liu
Opt. Lett. 47(19) 5200-5203 (2022)

Polarization splitter and rotator with subwavelength grating for enhanced fabrication tolerance

Yule Xiong, J. Gonzalo Wangüemert-Pérez, Dan-Xia Xu, Jens H. Schmid, Pavel Cheben, and Winnie N. Ye
Opt. Lett. 39(24) 6931-6934 (2014)