Abstract
One factor limiting interest in optical bistable devices is their relatively slow speed. For example, GaAs/AIGaAs MQW nonlinear etalon devices have switch-on times of 1 ps1 but switch-off times in excess of 150 ps.2 Similarly, ZnS and ZnSe thermal etalons can switch on more quickly than they switch off because of slow thermal relaxation times. This places a revere restriction on rates of operation. To circumvent this problem, we propose the use of nonlinear etalons in an optical time division multiplexing/demultiplexing system and describe a transmitter (two nonlinear etalons and an optical delay line) that can produce optical pulses as short as the etalon switch-on times. Pulses from the transmitter for each channel are coupled in a time sequence into a waveguide. The process is repeated after the etalon carrier-recombination (thermal relaxation) time has elapsed. Demultiplexing is carried out in a similar way. Etalon time division multiplexing results in bit rates much larger than possible for individual devices. For GaAs/AIGaAs etalons with 150-ps recombination times, bit rates from 6.7 to 500 Gbit/s should be obtainable, depending on the number of channels used. We experimentally demonstrate the feasibility of the multiplexing and demultiplexing schemes using ZnS thermal etalon devices.
© 1988 Optical Society of America
PDF ArticleMore Like This
R. S. TUCKER, S. K. KOROTKY, G. EISENSTEIN, L. L. BUHL, J. J. VESELKA, G. RAYBON, BRYON L. KASPER, A. H. GNAUCK, and RODNEY C. ALFERNESS
ThB2 Optical Fiber Communication Conference (OFC) 1988
J. Paye and D. Hulin
TuQ2 International Quantum Electronics Conference (IQEC) 1992
JUN OHTA, KAZUO KYUMA, MASAYA OITA, KAZUMASA MITSUNAGA, KOICHI HAMANAKA, and TAKASHI NAKAYAMA
WM63 Conference on Lasers and Electro-Optics (CLEO:S&I) 1988