Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > OAA > 1991 > WC > WC1

1.48μm and 0.98μm High-Power Laser Diodes for Erbium-Doped Fiber Amplifiers

Ikuo Mito and Kenji Endo

Not Accessible

Your library or personal account may give you access

Abstract

The development of erbium-doped fiber amplifiers has recently progressed rapidly. Highly efficient power conversion for 1.48μm wavelength pumping enables a post-amplifier to achieve output power greater than 100mW1). When pumped in 0.98μm wavelength, the erbium-doped fiber amplifiers showed very low noise property2), which permits high receiver sensitivity as a pre-amplifier.

© 1991 Optical Society of America

PDF Article
More Like This
Limits for pump efficiency in erbium-doped fiber amplifiers pumped at 0.98 and 1.48 μm

Bo Pedersen, Anders Bjarklev, Kristen Dybdal, and Carl Christian Larsen
ThM2 Optical Fiber Communication Conference (OFC) 1991

Noise Figure Increase of High Concentration Erbium-Doped Fiber Amplifiers Pumped by a 1.48-μm or 0.98-μm Laser Diode

Hiroji MASUDA and Kazuo AIDA
ThE2 Optical Amplifiers and Their Applications (OAA) 1995

0.98-μm Laser Diode Pumped Erbium-Doped Fiber Amplifiers with a Gain Coefficient of 7.6 dB/mW

Makoto Shimizu, Makoto Yamada, Tatsuya Takeshita, and Masaharu Horiguchi
MB2 Optical Amplifiers and Their Applications (OAA) 1990

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use