Abstract
Up to date, the majority of the existing petawatt class lasers are based on Ti:Sapphire (Ti:Sa) because of the wide emission spectrum, high thermal conductivity and loose requirement of the pump laser parameters [1]. However, petawatt systems with pulse duration considerably less than 25 fs are not yet available due to the gain narrowing effect which limits the achievable bandwidth [2]. The most widely used methods for overcoming gain narrowing are based on spectral shaping by inducing spectral losses (e.g. Dazzler), optical parametric amplification in the frontend and post compression. Unfortunately, critical all of them have imperfections, which limit their application. Polarization Encoded (PE) amplification in Ti:Sa was proposed to amplify pulses with spectral bandwidth supporting a few cycle duration even for final amplifiers of PW-level laser systems without energy losses, and the proof-of-principle experiments were recently reported [3]. A PE amplifier can preserve the bandwidth effectively during amplification by exploiting the difference between the π- and σ- emission cross-sections in a Ti:Sa medium, simultaneously the profile of the output spectrum can be conveniently shaped to either asymmetric red-, blue- shifted, or a symmetrically broad, only by rotating two λ/2 plates. These two features make the PE amplifier attractive for ultrashort high power laser systems.
© 2017 IEEE
PDF ArticleMore Like This
M. Kalashnikov, H. Cao, K. Osvay, V. Chvykov, N. Khodakovskiy, and R. S. Nagymihaly
SM1M.2 CLEO: Science and Innovations (CLEO:S&I) 2016
Roland S. Nagymihaly, Huabao Cao, Peter Jojart, Mikhail Kalashnikov, Adam Borzsonyi, Vladimir Chvykov, and Karoly Osvay
AW1A.5 Advanced Solid State Lasers (ASSL) 2017
V. Chvykov, R. Nagymihaly, H. Cao, M. Kalashnikov, and K. Osvay
AW4A.2 Advanced Solid State Lasers (ASSL) 2017