Abstract
A wide-dynamic-range and high-resolution optical fiber sensor based on Brillouin and Rayleigh scattering is proposed, which merges frequency-scanning phase-sensitive optical time-domain reflectometry (Φ-OTDR) and Brillouin optical time domain analysis (BOTDA) via an adaptive signal corrector (ASC). The ASC suppresses the accumulated error of Φ-OTDR with the reference of BOTDA, which breaks through the measurement range limitation of Φ-OTDR so that the proposed sensor can perform a high-resolution measurement in a wide dynamic range. Its measurement range is determined by BOTDA, and can reach the limitation of optical fiber, while the resolution is limited by Φ-OTDR. In proof-of-concept experiments, a maximum strain variation of up to 302.9 µɛ is measured with a resolution of 5.5 nɛ. Furthermore, with an ordinary single-mode fiber, high-resolution dynamic pressure monitoring in the range from 20 MP to 0.29 MPa is also demonstrated with 0.14-kPa resolution. This research represents the first time, to the best of our knowledge, that a solution for merging data from a Brillouin sensor and a Rayleigh sensor which achieves the advantages of the two sensors at the same time has been realized.
© 2022 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Liqiang Qiu, Dexin Ba, Dengwang Zhou, Qi Chu, Zongda Zhu, and Yongkang Dong
Opt. Lett. 47(4) 965-968 (2022)
Matthew J. Murray, Joseph B. Murray, Hannah M. Ogden, and Brandon Redding
Opt. Express 31(1) 287-300 (2023)
Ali Masoudi, Mohammad Belal, and Trevor P. Newson
Opt. Lett. 38(17) 3312-3315 (2013)