A polymer/liquid crystal-based fiber Bragg grating (PLC-FBG) is fabricated with visible two-beam holography by photo-induced modulation of a prepolymer/liquid crystal solution infiltrated into the hollow channels of a solid core photonic crystal fiber (PCF). The fabrication process and effects related to the photonic bandgap guidance into the infiltrated PCF, and characterization of the PLC-FBG, are discussed. Experimental data presented here demonstrate that the liquid crystal inclusions of the PLC-FBG lead to high thermal and bending sensitivities. The microscopic behavior of the polymer/liquid crystal phase separation inside the PCF capillaries is examined using scanning electron microscopy, and is discussed further.
© 2013 Optical Society of AmericaFull Article | PDF Article
OSA Recommended Articles
Appl. Opt. 50(4) 594-603 (2011)
Jie Zhang, Haitao Dai, Chao Yan, Degang Xu, Yanjun Liu, Dan Luo, and Xiaowei Sun
Opt. Mater. Express 6(4) 1367-1375 (2016)
Markus Wahle and Heinz Kitzerow
Opt. Lett. 39(16) 4816-4819 (2014)