Abstract
Digitally enhanced interferometry (DI) can be used to distinguish between interferometric signals and simultaneously monitor in-line object displacements with subnanometer sensitivity. In contrast to conventional interferometry—where these signals interfere with each other and degrade performance—we experimentally show that by using DI, each of these signals can be isolated and measured at the same time. We present what we believe to be the first demonstration of DI’s signal multiplexing capabilities, showing simultaneous length sensing of three sections of an optical fiber. The cross talk between length measurements was less than with a displacement noise floor of , which corresponds to a strain sensitivity of less than in each sensor. We also enhance our system’s displacement sensitivity at low frequencies by combining information from multiple lengths to suppress errors due to laser frequency noise.
© 2011 Optical Society of America
Full Article | PDF ArticleMore Like This
Glenn de Vine, David S. Rabeling, Bram J. J. Slagmolen, Timothy T-Y. Lam, Sheon Chua, Danielle M. Wuchenich, David E. McClelland, and Daniel A. Shaddock
Opt. Express 17(2) 828-837 (2009)
Juan José Esteban, Antonio F. García, Simon Barke, Antonio M. Peinado, Felipe Guzmán Cervantes, Iouri Bykov, Gerhard Heinzel, and Karsten Danzmann
Opt. Express 19(17) 15937-15946 (2011)
Katharina-S. Isleif, Oliver Gerberding, Sina Köhlenbeck, Andrew Sutton, Benjamin Sheard, Stefan Goßler, Daniel Shaddock, Gerhard Heinzel, and Karsten Danzmann
Opt. Express 22(20) 24689-24696 (2014)