Abstract
The authors present an erratum to update the Acknowledgements section in their published article, [“Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array,” Opt. Express 31, 30550 (2023) [CrossRef] ].
© 2024 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Erratum
The following acknowledgements were inadvertently omitted from the published article [1]. The corrected Acknowledgements section is also provided below.
“This work was supported in part by the U.S. Department of Energy, Office of Science, Office of Workforce Development for Teachers and Scientists (WDTS) under the Science Undergraduate Laboratory Internships (SULI) program. This work was performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Los Alamos National Laboratory (Contract 89233218CNA000001) and Sandia National Laboratories (Contract DE-NA-0003525).”
Funding
Office of Naval Research (N00014-20-1-2087); National Science Foundation (1926668); National Institutes of Health (UF1 NS116241); University of Colorado (Anschutz-Boulder Nexus Seed Grant).
Acknowledgements
This work was supported in part by the U.S. Department of Energy, Office of Science, Office of Workforce Development for Teachers and Scientists (WDTS) under the Science Undergraduate Laboratory Internships (SULI) program. This work was performed, in part, at the Center for Integrated Nanotechnologies, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Los Alamos National Laboratory (Contract 89233218CNA000001) and Sandia National Laboratories (Contract DE-NA-0003525). Publication of this article was funded by the University of Colorado Boulder Libraries Open Access Fund. The authors would like to thank Dr. Curtis Beimborn (CU Boulder, JILA) for his valuable assistance and advice in the JILA cleanroom. Additionally, we would like to thank Dr. Igal Brener (Sandia National Lab, CINT) for his support and for allowing us to use the CINT cleanroom during the COVID-19 pandemic.
Disclosures
The authors declare that there are no conflicts of interest related to this article.
References
1. S. D. Gilinsky, M. Zohrabi, W. Y. Lim, et al., “Fabrication and characterization of a two-dimensional individually addressable electrowetting microlens array,” Opt. Express 31(19), 30550–30561 (2023). [CrossRef]