Abstract
A hybrid chirped pulse amplification system composed by the monolithic fiber pre-amplifier and a two-stage single-pass single crystal fiber amplifier was demonstrated. A maximum power of 68 W at the repetition rate of 100 kHz was obtained. The laser pulses were amplified and then compressed using a 1600 line/mm grating pair compressor. A short pulse duration of 358 fs and a power of 54 W were obtained at 100 kHz, corresponding to a peak power of 1.508 GW, to the best of our knowledge, this is the highest peak power ever obtained from single crystal fiber at repetition rate above 100 kHz due to the consideration of the third order dispersion which was engraved in the stretcher and the tuning capacity of higher-order dispersion compensation of chirped fiber Bragg grating. Additionally, the beam quality better than 1.3 was obtained. This high peak power CPA system with excellent comprehensive parameters will find various applications in scientific research and industrial applications.
PDF Article
Cited By
Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.