Abstract
Intensity-modulation and direct-detection (IM/DD) transmission over short-reach optical fiber links, require electronic dispersion compensation (EDC) at the transmitter and/or electronic equalization at the receiver. Recently, the iterative Gerchberg-Saxton (GS) algorithm was demonstrated for EDC in IM/DD systems, through treating the amplitude at the transmitter and the phase prior-to the direct detection receiver as a degree of freedom. In Part I of this work, three GS approaches using finite impulse response (FIR) filters for EDC in IM/DD systems are demonstrated. The first two are closely related and rely on a cascaded FIR structure, while the third offers a novel non-iterative EDC solution using a single GS optimized static FIR filter. This is achieved through decoupling pattern dependent aspects of transmission from the GS iterations by targeting a single impulse at the DD receiver. With every successive iteration an impulse response for the GS filter emerges and sets the FIR tap weights. It is also demonstrated that closed-form analytical expressions for the GS filter impulse response can be obtained through small-signal frequency-domain analysis. The FIR filter is simulated using 8-bit finite-precision arithmetic. An adaptive
$T$
-spaced post feed-forward equalizer (FFE) is utilized for mitigating residual chromatic dispersion. It is shown, that a
$T/2$
-spaced pre-EDC FIR filter with 417 taps can support 56 Gb/s non-return-to-zero (NRZ) on-off keying (OOK) transmission over 80 km of single mode fiber (SMF) with a chirp-free Mach-Zehnder modulator (MZM). Part II, presents experimental demonstration of the non-iterative GS FIR filter proposed and simulated in this article.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription