Abstract

A novel bending sensor based on an in-fiber Mach–Zehnder interferometer (MZI) has been fabricated by femtosecond laser. The MZI is formed by an off-axial straight waveguide inscribed in a no-core fiber spliced between two standard single mode fibers. The in-fiber MZI is formed due to the interference of a fundamental mode and a higher-order mode which excited in the no-core fiber. Analysis results of the structure agree well with the measured transmission spectra. Experimental results show that the device has low temperature crosstalk and high curvature sensitivity of 14.91 nm/m⁻¹ and 12.86 nm/m⁻¹ for the 0° and 180° orientations in the range of 0–3 m⁻¹, respectively. We can distinguish the bending orientation of the device by the shift direction of the spectrum. The advantages of high sensitivity, low temperature crosstalk, compact structure, and easy fabrication make the device attractive for actual engineering bend sensing.

Compact assembly-free vector bend sensor based on all-in-fiber-core Mach–Zehnder interferometer

Pengcheng Chen, Xuewen Shu, and Kate Sugden
Opt. Lett. 43(3) 531-534 (2018)

Femtosecond laser inscribed straight waveguide in no-core fiber for in-line Mach–Zehnder interferometer construction

W. W. Li and D. N. Wang
Opt. Lett. 43(14) 3405-3408 (2018)

High-sensitivity vector bend sensor based on a fiber directional coupler inscribed by a femtosecond laser

Ke Tian, Mingyuan Zhang, Chuanzhen Zhao, Huibin Li, Shilong Li, Yuxuan Jiang, Elfed Lewis, Gerald Farrell, and Pengfei Wang
Opt. Lett. 48(6) 1498-1501 (2023)

Fiber inline Mach–Zehnder interferometer based on femtosecond laser inscribed waveguides

W. W. Li, W. P. Chen, D. N. Wang, Z. K. Wang, and Ben Xu
Opt. Lett. 42(21) 4438-4441 (2017)

Fiber-optic bending vector sensor based on Mach–Zehnder interferometer exploiting lateral-offset and up-taper

Shanshan Zhang, Weigang Zhang, Shecheng Gao, Pengcheng Geng, and Xiaolin Xue
Opt. Lett. 37(21) 4480-4482 (2012)