Abstract
1.25 Gb/s optoelectronic full-triplex transceiver module with planar-lightwave-circuits
was designed and fabricated for the fiber-to-the-home services according to
G/E-PONs standards. A low electrical crosstalk of the critical characteristics
for the reliable operation of the 1.25 Gb/s full-triplex transceiver module
is intensively investigated because the electrical crosstalk on a resistive
silicon substrate is more serious than that on a dielectric substrate. It
is observed that the performances of the transmitter and receiver satisfy
the transmitter and receiver specifications defined in the standards. From
this proposed module layout, a design convenience as well as a great reduction
of the silicon substrate size by about 50 % was completely achieved. Consequently,
the 1.25 Gb/s full-triplex transceiver module was fabricated with electrical
and mechanical packaging technologies such of a low crosstalk design and a
passive alignment method.
© 2009 IEEE
PDF Article
More Like This
From 25 Gb/s to 50 Gb/s TDM PON: transceiver architectures, their performance, standardization aspects, and cost modeling
Ed Harstead, Rene Bonk, Sheldon Walklin, Dora van Veen, Vincent Houtsma, Noriaki Kaneda, Amitkumar Mahadevan, and Robert Borkowski
J. Opt. Commun. Netw. 12(9) D17-D26 (2020)
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription