Abstract
A deeply etched SiO<sub>2</sub> ridge waveguide including the buffer, core, and cladding is presented for realizing sharp bends. The present SiO<sub>2</sub> ridge waveguide has a strong confinement at the lateral direction, while it has a weak confinement at the vertical direction. Due to the strong confinement, a sharp bend (with a very small bending radius of about 10 μm) is obtained for an acceptable bending loss. A detailed analysis of the loss in a bent waveguide is given by using a finite-difference method. In order to reduce the transition loss, a narrow bending section with an optimal lateral offset is used. A low leakage loss is obtained by using wide straight waveguides, and linear tapers are used to connect the wide straight section and narrow bent sections.
© 2006 IEEE
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription