Abstract

Electron number density and temperature were determined from laser-induced plasmas produced by irradiating Al-Cu-Fe targets of a quasicrystal and of an alloy of similar composition. The Al(I) atomic emission spectra of the two systems were measured as a function of the distance from the target and of the time delay after laser irradiation. Differences of plasma characteristics were observed for laser ablation of quasicrystal and alloy targets, and the results were interpreted on the basis of different plasma formation mechanisms for the two systems.

Characterization of local thermodynamic equilibrium in a laser-induced aluminum alloy plasma

Yong Zhang, Zhenyang Zhao, Tao Xu, GuangHui Niu, Ying Liu, and Yixiang Duan
Appl. Opt. 55(10) 2741-2747 (2016)

Stoichiometric investigations of laser-ablated brass plasma

D. N. Patel, P. K. Pandey, and R. K. Thareja
Appl. Opt. 51(7) B192-B200 (2012)

Laser-induced breakdown spectroscopy of molten aluminum alloy

Awadhesh K. Rai, Fang-Yu Yueh, and Jagdish P. Singh
Appl. Opt. 42(12) 2078-2084 (2003)

Imaging and emission spectroscopy of the submicrosecond plasma generated from copper substrate with nanosecond laser pulses

Mateusz Tanski, Robert Barbucha, Jerzy Mizeraczyk, and Szymon Tofil
Appl. Opt. 59(27) 8388-8394 (2020)

Influence of molybdenum layer on the laser plasma generated from interfacing copper layer

Chan K. Kim, Dong S. Kim, Seok H. Lee, Hee-S. Shim, and Sungho Jeong
Appl. Opt. 51(7) B93-B98 (2012)