Abstract

Laser-induced fluorescence of iron atoms during the plasma-off cycle of a power-modulated inductively coupled plasma has been performed. The low plasma background emission, and absence of radio-frequency interference, 1.4 ms after complete interruption of power to the ICP, results in an excellent environment for fluorescence detection. With the use of a simple nondispersive detection system, a limit of detection of 5 μg Fe/L was achieved. The iron atom population was found to remain constant for 1.2 ms after power interruption, indicating that the chemical environment during this period is inert. A spatial profile and ICP power study were conducted as diagnostic aids for optimization of the power-modulated ICP for both fluorescence and ionization detection.

Trace detection of krypton using laser-induced fluorescence

C. A. Whitehead, B. D. Cannon, and J. F. Wacker
Appl. Opt. 34(18) 3250-3256 (1995)

Multielemental analysis of prehistoric animal teeth by laser-induced breakdown spectroscopy and laser ablation inductively coupled plasma mass spectrometry

Michaela Galiová, Jozef Kaiser, Francisco J. Fortes, Karel Novotný, Radomír Malina, Lubomír Prokeš, Aleš Hrdlička, Tomáš Vaculovič, Miriam Nývltová Fišáková, Jiří Svoboda, Viktor Kanický, and Javier J. Laserna
Appl. Opt. 49(13) C191-C199 (2010)

Detection of iron atoms by emission spectroscopy and laser-induced fluorescence in solid propellant flames

G. Vilmart, N. Dorval, M. Orain, D. Lambert, R. Devillers, Y. Fabignon, B. Attal-Tretout, and A. Bresson
Appl. Opt. 57(14) 3817-3828 (2018)

Detection of trace amounts of Cr by two laser-based spectroscopic techniques: laser-enhanced ionization in flames and laser-induced fluorescence in graphite furnace

Ove Axner and Halina Rubinsztein-Dunlop
Appl. Opt. 32(6) 867-884 (1993)

Laser-induced fluorescence detection strategies for sodium atoms and compounds in high-pressure combustors

Karen J. Rensberger Weiland, Michael L. Wise, and Gregory P. Smith
Appl. Opt. 32(21) 4066-4073 (1993)