Abstract
A very satisfactory film washer has been built using a piece of stainless steel tubing and a base plate. Type 304 stainless steel has been recommended for photographic processing containers where water and photographic processing liquids are used. Figure 1 shows the necessary details of construction. The film is hung inside the washer by a stainless steel film clip (<i>Kodak</i> Jr. Film Clip), one side of which is welded to the center of a stainless steel rod. Slots filed in the top of the washer tube keep the rod in a fixed position during use. A small dental x-ray film clip serves as a weight at the bottom of the film to hold it down during washing. The washer is easily fabricated in a machine shop and has proven to perform rapidly and satisfactorily.
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription