Abstract

We report the results of fabricating fiber array unit (FAU) connectors using a near IR laser welding process, locking fibers in proper position on planar glass substrates and forming strong glass-to-glass bonds, followed by final assembly using lower coefficient of thermal expansion (CTE) epoxies. A thin metal film deposited on the glass substrate provides the absorption required to attain interfacial temperatures suitable for glass-to-glass bonding. This method allows the elimination of dedicated expensive V-groove plates while still maintaining very good fiber placement accuracy. The use of epoxy is minimized to simply securing macro packaging components and protecting fibers from environmental pressure, temperature, and humidity variation. The thermal expansion properties of the epoxy used were essential for the long-term FAU reliability.

© 2024 Optica Publishing Group

Femtosecond laser welding for robust and low loss optical fiber bonding

Junxian Luo, Kanghu Zhou, Yingqing Ma, Yu Lei, Hanwen Liu, Hongwei Tong, Richard Xiao, Yuwen Wang, Ye Chen, Zhuo Chen, and Fei Xu
Opt. Express 30(23) 41092-41100 (2022)

Ultrashort pulsed fiber laser welding and sealing of transparent materials

Huan Huang, Lih-Mei Yang, and Jian Liu
Appl. Opt. 51(15) 2979-2986 (2012)

Femtosecond fiber laser welding of dissimilar metals

Huan Huang, Lih-Mei Yang, Shuang Bai, and Jian Liu
Appl. Opt. 53(28) 6569-6578 (2014)

Laser tissue welding by using collagen excitation at a 1,720 nm near-infrared optical window III

Stefan Thomas, Vidyasagar Sriramoju, and Robert R. Alfano
Appl. Opt. 63(4) 1007-1014 (2024)

Welding of PMMA by a femtosecond fiber laser

Annalisa Volpe, Francesca Di Niso, Caterina Gaudiuso, Andrea De Rosa, Rebeca Martínez Vázquez, Antonio Ancona, Pietro Mario Lugarà, and Roberto Osellame
Opt. Express 23(4) 4114-4124 (2015)