Abstract

Laser interference lithography is an effective approach for grating fabrication. As a key parameter of the grating profile, the duty cycle determines the diffraction characteristics and is associated with the irradiance of the exposure beam. In this study, we developed a fabrication technique amplitude-splitting flat-top beam interference lithography to improve duty cycle uniformity. The relationship between the duty cycle uniformity and irradiance of the exposure beam is analyzed, and the results indicate that when the beam irradiance nonuniformity is less than 20%, the grating duty cycle nonuniformity is maintained below $\pm {2}\%$. Moreover, an experimental amplitude-splitting flat-top beam interference lithography system is developed to realize an incident beam irradiance nonuniformity of 21%. The full-aperture duty cycle nonuniformity of the fabricated grating is less than $\pm {3}\%$. Amplitude-splitting flat-top beam interference lithography improves duty cycle uniformity, greatly reduces energy loss compared to conventional apodization, and is more suitable for manufacturing highly uniform gratings over large areas.

© 2024 Optica Publishing Group

Measurement of duty cycles of photoresist grating masks made on top of multilayer dielectric stacks

Lifeng Li and Lijiang Zeng
Appl. Opt. 44(21) 4494-4500 (2005)

Controlling the duty cycle of holographic crossed gratings by in situ endpoint detection during development

Shiwei Wang and Lijiang Zeng
Appl. Opt. 55(10) 2657-2663 (2016)

Method for fabricating large-area gratings with a uniform duty cycle without a spatial beam modulator

Jiujiu Liang, Chongyu Wang, Haiou Lu, Xiaohao Wang, Kai Ni, and Qian Zhou
Opt. Express 29(17) 27791-27806 (2021)

Duty cycle estimate of photoresist gratings via monitoring TM/TE diffraction efficiency ratio during development

Biyao Shen, Lijiang Zeng, and Lifeng Li
Appl. Opt. 55(30) 8472-8477 (2016)

Chemical mechanical polishing to improve the efficiency uniformity of beam sampling grating

Huanle Rao, Ying Liu, Zhengkun Liu, Keqiang Qiu, Xiangdong Xu, Yilin Hong, and Shaojun Fu
Appl. Opt. 53(6) 1221-1227 (2014)