Abstract
A near-infrared (NIR)-enhanced single-photon avalanche diode (SPAD) with a retrograded NM/XP junction for an automotive LiDAR was designed based on CSMC 0.18 µm BCD technology. A 3 µm depth NM/XP junction embedded in a lightly doped deep p-well (DP) improves the absorption efficiency in the NIR regime; the photo-generated electrons generated in the depletion region are efficiently collected into the central multiplication region by a drift process, and then the impact ionization is triggered by the strong field, resulting in a high photon detection efficiency (PDE). Additionally, the deep NM/XP junction and the buried layer effectively isolate the dark noise originating from the interface and the substrate. The SPAD was initially simulated by numerical calculation, and then was evaluated with active quench/reset electronics in a circuit simulator. The results revealed that the SPAD with an active area of ${314}\;{{\unicode{x00B5}{\rm m}}^2}$ achieves a PDE of 16.2% at 905 nm and a dark count rate (DCR) of ${1.46}\;{{\rm Hz/\unicode{x00B5}{\rm m}}^2}$, with an excess bias of 5 V at room temperature. The designed SPAD is well suited for the low-cost, miniaturized automotive LiDAR.
© 2023 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Won-Yong Ha, Eunsung Park, Doyoon Eom, Hyo-Sung Park, Daniel Chong, Shyue Seng Tan, Michelle Tng, Elgin Quek, Claudio Bruschini, Edoardo Charbon, Woo-Young Choi, and Myung-Jae Lee
Opt. Express 31(9) 13798-13805 (2023)
Kazuhiro Morimoto and Edoardo Charbon
Opt. Express 28(9) 13068-13080 (2020)
Hesong Xu, Lucio Pancheri, Gian-Franco Dalla Betta, and David Stoppa
Opt. Express 25(11) 12765-12778 (2017)