Abstract
In the framework of high-power lasers, surface defects on optics can generate strong light intensification and induce damage sites on downstream optics. To evaluate this intensification during high-energy laser shots, a three-step method is proposed. First, a dedicated measurement bench is designed to measure the intensification induced by defects on a wide variety of optics, including amplifier slabs, KDP crystals, mirrors, gratings, and vacuum windows, for propagation distances up to 2000 mm. A multi-resolution single-beam multiple-intensity reconstruction phase retrieval algorithm is then used to reconstruct a model of the defect, in both amplitude and phase, from a set of intensification measurements. Finally, the impact of the modeled defect on downstream optics is evaluated with a simulation of the high-power laser system. This method is experimentally validated through a case study of damage identified on one of the Laser Mégajoule (LMJ) beams, characterized with the method presented in this paper. The long-distance impact on the LMJ beam is estimated by simulation and compared to a direct near-field measurement.
© 2022 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Stéphane Bouillet, Christel Ameil, Vincent Beau, Odile Bonville, Sandy Cavaro, Roger Courchinoux, Jérôme Daurios, Thierry Donval, Laure Eupherte, Sandrine Fréville, Gaël Gaborit, Isabelle Lebeaux, Christophe Leymarie, Sébastien Martin, Romain Parreault, Gérard Razé, Nadja Roquin, and Laurent Lamaignère
J. Opt. Soc. Am. A 36(11) C95-C103 (2019)
Arthur Le Camus, Hervé Coic, Nathalie Blanchot, Stéphane Bouillet, Eric Lavastre, Mélanie Mangeant, Claude Rouyer, and Jérôme Néauport
Opt. Express 30(5) 7426-7440 (2022)
Isam Ben Soltane, Guillaume Hallo, Chloé Lacombe, Laurent Lamaignère, Nicolas Bonod, and Jérome Néauport
J. Opt. Soc. Am. A 39(10) 1881-1892 (2022)