Abstract
A reflective-type polarization wavelength filter was fabricated by anodizing a Ti grating film. This polarization filter consisted of a Ti film, an anodized titanium oxide film (thickness ${\sim}{{25}}\;{\rm{nm}}$), and a photoresist grating with a pitch of 410 nm. The reflectance was less than 10% for both polarizations at 490–675 nm at an incident angle of 9°. In addition, the transverse electric (TE) reflectance of the fabricated element was over 40%, whereas the transverse magnetic (TM) reflectance was 25.8% at 375 nm. Upon increasing the incident angle to 75°, the TE reflectance increased to 77.8% at 375 nm, whereas the TM reflectance decreased to 5.9%.
© 2022 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Itsunari Yamada and Rei Yoshida
Appl. Opt. 59(18) 5570-5575 (2020)
Li-Feng Huang and Mitsunobu Miyagi
Appl. Opt. 34(19) 3662-3667 (1995)
Jie Cui, Xue-Cheng Cui, Hui Xu, Ying Liu, Jun Zheng, and Zhi-Cheng Ye
Appl. Opt. 54(13) 3868-3872 (2015)