Abstract
The optimization of components that rely on spatially dithered distributions of transparent or opaque pixels and an imaging system with far-field filtering for transmission control is demonstrated. The binary-pixel distribution can be iteratively optimized to lower an error function that takes into account the design transmission and the characteristics of the required far-field filter. Simulations using a design transmission chosen in the context of high-energy lasers show that the beam-fluence modulation at an image plane can be reduced by a factor of 2, leading to performance similar to using a non-optimized spatial-dithering algorithm with pixels of size reduced by a factor of 2 without the additional fabrication complexity or cost. The optimization process preserves the pixel distribution statistical properties. Analysis shows that the optimized pixel distribution starting from a high-noise distribution defined by a random-draw algorithm should be more resilient to fabrication errors than the optimized pixel distributions starting from a low-noise, error-diffusion algorithm, while leading to similar beam-shaping performance. This is confirmed by experimental results obtained with various pixel distributions and induced fabrication errors.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
C. Dorrer and J. Qiao
Appl. Opt. 57(29) 8557-8565 (2018)
Christophe Dorrer
Appl. Opt. 52(14) 3368-3380 (2013)
Christophe Dorrer and Jonathan D. Zuegel
J. Opt. Soc. Am. B 24(6) 1268-1275 (2007)