## Abstract

Interferometry with a null corrector can be used to test cylindrical surfaces. The requirement for accurate measurement is a null fringe pattern. When the tested cylindrical surface is not perfect or seriously misaligned, a nonzero fringe pattern might be obtained. As a result, high-order misalignment aberrations (e.g., coma and spherical aberration) are introduced into the measurement. The sources and types of high-order misalignment aberrations are analyzed by orthogonal Legendre polynomials. Based on the analysis, a mathematical model was proposed to estimate the high-order misalignment aberrations. Then a wavefront difference method was proposed to calibrate the coefficients of this model. With the calibrated coefficients, the high-order misalignment aberrations can be determined and separated from the measurement results. Several experiments were conducted to demonstrate the validity of the proposed method. Compared with the lower-order misalignment aberrations removal method, the proposed method can reduce the high-order misalignment aberrations by at least half, and highly accurate results can be achieved by the proposed method.

© 2014 Optical Society of America

Full Article | PDF Article**OSA Recommended Articles**

Junzheng Peng, Dongbao Ge, Yingjie Yu, Kesheng Wang, and Mingyi Chen

Appl. Opt. **52**(30) 7311-7323 (2013)

Junzheng Peng, Qingquan Wang, Xiang Peng, and Yingjie Yu

J. Opt. Soc. Am. A **32**(11) 1964-1972 (2015)

Daodang Wang, Yongying Yang, Chen Chen, and Yongmo Zhuo

Appl. Opt. **50**(14) 2024-2031 (2011)