This study aims at optimizing two-line OH thermometry strategies for in-cylinder measurement in internal combustion engines. Various aspects are investigated experimentally, such as the selection of suitable OH lines and the possibility of using a single calibration coefficient for variable mixture composition, temperature, and pressure conditions. Two kinds of experimental systems have been investigated. First, a laminar methane–air burner flame at atmospheric pressure, whose stability allowed the determination of OH-laser-induced fluorescence (LIF) intensity ratios from nonsimultaneous imaging. The temperature distribution in the flame is presented for OH-transition pairs with various temperature sensitivities. The burner flame was studied for equivalence ratios from to 1.30 in order to check for the stability of calibration over various flame conditions. Additionally, OH LIF images were acquired in an optical engine for the chosen OH transitions yielding data about the effect of pressure on OH LIF signals under realistic experimental conditions.
© 2008 Optical Society of AmericaFull Article | PDF Article
More Like This
Robert Giezendanner-Thoben, Ulrich Meier, Wolfgang Meier, Johannes Heinze, and Manfred Aigner
Appl. Opt. 44(31) 6565-6577 (2005)
Stanislav Kostka, Sukesh Roy, Patrick J. Lakusta, Terrence R. Meyer, Michael W. Renfro, James R. Gord, and Richard Branam
Appl. Opt. 48(32) 6332-6343 (2009)
Appl. Opt. 40(27) 4894-4903 (2001)