Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

High-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator

Not Accessible

Your library or personal account may give you access

Abstract

We report on a high-power mid-infrared (MIR) frequency comb source based on a femtosecond (fs) Er:fiber oscillator with a stabilized repetition rate of 250 MHz. The MIR frequency comb is produced through difference frequency generation in a periodically poled MgO-doped lithium niobate crystal. The output power is about 120 mW, with a pulse duration of about 80 fs and spectrum coverage from 2.9 to 3.6 μm, and the single comb mode power is larger than 0.3 μW over the range of 700 nm. The coherence properties of the produced high-power broadband MIR frequency comb are maintained, which was verified by heterodyne measurements. As the first application, the spectrum of a 200ppm methane–air mixture in a short 20 cm glass cell at ambient atmospheric pressure and temperature was measured.

© 2013 Optical Society of America

Full Article  |  PDF Article

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (5)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.