Abstract
When pump-probe measurements are performed using pulses originating from the same laser, it is necessary to consider the coherent interaction between the two pulses in determining any material relaxation rates on the time scale of the laser pulse.1-5 For pump and probe beams crossing at an angle, the source of the coherent artifact can be understood in the following manner.1 When the two beams are simultaneously present in the sample, they interfere to produce a spatial modulation of the dielectric constant. Light from the pump beam then scatters from this induced grating into the probe direction. This model has led to the suggestion that for the collinear, copropagating beams, where the spatial grating disappears, the coherent artifact should vanish.3 While the spatial modulation is eliminated by choosing this geometry, we demonstrate here that the coherent artifact, which results directly from the nonlinear polarizability of the material, still remains. We have, however, been able to develop a general method for isolating the incoherent response, thus permitting the material relaxation to be extracted without any knowledge of the coherence properties of the pulse.
© 1984 Optical Society of America
PDF ArticleMore Like This
N. Tessler, A. Berenzon, and C. Eisenstein
CWN2 Conference on Lasers and Electro-Optics (CLEO:S&I) 1994
T. F. Heinz and S. L. Palfrey
WR5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1985
Todd S. Rose, Roberto Righini, and M. D. Fayer
ThD6 International Conference on Ultrafast Phenomena (UP) 1984