Abstract

Low voltage vertical short channel OFET is realized by designing novel device structure without high resolution photolithographic patterning. Soluble pentacene precursor 13,6-N-sulfinylacetamidopentacene based low cost spin coating technique is used to design thin channel OFET using 3M Kapton scotch tape for masking. Device novelty provides fully encapsulated pentacene active layer from environment using sheet type electrodes. High output current of 5mA is achieved under 1volt with channel length of 350nm. AFM scanning shows dendritic pentacene structure growth after annealing at 200°C.

© 2011 Optical Society of America

PDF Article
More Like This
ZnO-based Nanowires for hybrid low-voltage LED

Oleg Lupan, Thierry Pauporté, and Bruno Viana
CE2_3 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2011

Improved performances in annealed P3HT-based dye sensitized solar cells (DSSC): a detailed morphological and spectroscopic investigation

R. Sai Santosh Kumar, G. Grancini, A. Abrusci, and H. J. Snaith
PThD6 Optical Nanostructures and Advanced Materials for Photovoltaics (PV) 2011

High-Power BCB Encapsulated VCSELs based on InP

T. Gruendl, M. Mueller, K. Geiger, C. Grasse, G. Boehm, R. Meyer, and M.-C. Amann
CTuP1 CLEO: Science and Innovations (CLEO_SI) 2011

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription