Abstract
It is known that the UV narrow-band filters are important in the specific application. In this paper the design and the fabrication of a series of narrow-band filters for sequential central wavelengths from 300 to 380nm are reported. The technical requirements of the filter designed are as follows: ■ Center-wavelength distance between every two filters is 5-10nm. Shown as figure(1). ■ The peak transmittance of central wavelength ≥ 40%. ■ The long wavelength rejection zone extends to 690-2500nm (According to different demands). ■ The short wavelength rejection zone extends to 200nm. ■ The transmittance for rejection zone ≤ 1‰.
© 1998 Optical Society of America
PDF ArticleMore Like This
A.V. Kachinsky, A.V. Ermakov, and V.A. Orlovich
CWF1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1998
Jerzy Ciosek
TuD.3 Optical Interference Coatings (OIC) 1998
J.A. Dobrowolski and Li Li
TuC.4 Optical Interference Coatings (OIC) 1998