Abstract

Optical solitons are pulses that propagate in optical fibers without temporal or spectral distortion, owing to balancing of the second-order dispersion of the refractive index by nonlinear self-phase modulation induced by the intensity-dependent refractive index. Classically, this stationary distortion-free propagation only requires the proper choice of pulse width and shape for a given pulse energy. However, quantum fluctuations do not undergo stationary propagation but rather evolve due to dispersion and self-phase modulation. As a soliton pulse propagates, zero-point or vacuum noise associated with the pulse evolves into squeezed noise. Vacuum fluctuations are responsible for the fundamental detector noise floor known as the shot noise limit. Reduction of the noise in the detection of squeezed soliton pulses has achieved a noise level 34% below this limit. In optical fibers, thermal fluctuation of the refractive index limit the noise reduction that can be achieved by adding phase fluctuations in excess of the vacuum noise. At low frequencies thermal noise originates from local structural dynamics of fused silica which produces a 1/f power spectrum and from guided acoustic wage Brillouin scattering which modulates the refractive index at frequencies characteristic of the fiber structure. The bandwidth of these fluctuations is ~2 GHz; and for soliton pulses with spectral bandwidth much >2 GHz, we have shown that this noise can be made insignificant. For very short pulses, however, noise from Raman scattering must be considered. Recent calculations incorporating this noise mechanism are compared with experiment.

© 1991 Optical Society of America