Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

High Receiver Sensitivity at 2.5 Gb/s obtained with a Highly Efficient Low Noise Diode Pumped Erbium Doped Fiber Amplifier

Not Accessible

Your library or personal account may give you access

Abstract

Laser diode pumped Erbium doped fiber amplifiers (EDFA) with low noise figures and high saturation powers are attractive because the ratio between the saturation power and the noise figure can be considered as a figure of merit for several applications [1], These include multichannel receivers where high sensitivity and high saturation power increases the number of channels to be received and in-line applications where the dynamic range is proportional to the above mentioned figure of merit.

© 1991 Optical Society of America

PDF Article
More Like This
Ultra-low receiver sensitivity at 2.3 Gb/s with a 1480-nm diode-pumped erbium-doped fiber preamplifier

P. M. Gabla, S. Gauchard, I. Neubauer, J. Auge, Ph. Bousselet, and A. Dursin
ThH4 Optical Fiber Communication Conference (OFC) 1991

High Receiver Sensitivity at 10 Gb/s using an Er-doped Fiber Preamplifier pumped with a 0.98 μm Laser-Diode

Tomoki Saito, Yoshimitsu Sunohara, Kazuo Fukagai, Shin Ishikawa, Naoya Henmi, Sadao Fujita, and Yasuhiro Aoki
PD14 Optical Fiber Communication Conference (OFC) 1991

Pump Configuration and Length Optimization of Erbium-doped Fiber Amplifier for Low Noise and High Power Operation

M. Suyama, I. Yokota, S. Watanabe, and H. Kuwahara
ThE4 Optical Amplifiers and Their Applications (OAA) 1991

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.