Abstract

The principle design ideas of thin disk lasers [1] will be illustrated and the advantages for operating different laser-active materials will be explained in detail. So far, the maximum laser cw-output power demonstrated from one single disk is more than 10 kW with an optical to optical efficiency of more than 50 %. Another way to scale the output power is the use of several disks in one laser resonator. Using this possibility, more than 27 kW output power with ten disks in one resonator and with good beam quality have been demonstrated. In this contribution the scaling laws for cw-operation of thin disk lasers will be laid down showing that more than 100 kW extracted output power from one single disk will also be possible. In conclusion, scaling the power per disk and using several disks in one resonator or using additional disks in a laser-amplifier, may result in MW class laser systems with good beam quality.

© 2013 IEEE

PDF Article
More Like This
Scaling Thin Disk Lasers to High Power and Energy

Adolf Giesen
CTu1O.1 CLEO: Science and Innovations (CLEO_SI) 2013

Thin Disk Lasers

Adolf Giesen
CA1_1 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2007

High-Power Thin-Disk Lasers

Adolf Giesen
MA1 Advanced Solid-State Photonics (ASSP) 2007

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription