Abstract

The present contribution reports on the modelling, fabrication, as well as the intra-cavity characterization of fully dielectric grating-mirrors for Yb:YAG thin-disk lasers [1]. By integrating a low-index leaky-mode waveguide and a sub-wavelength diffraction grating onto an HR mirror, such devices achieve high diffraction efficiencies [1-3], in our case >99.8% in the -1st order. Used as simple one-to-one replacement for laser cavity end mirrors, they allow a highly efficient generation of beams with very narrow spectral bandwidth and high-polarization purity. Since the grating-waveguide-mirrors (GWM) are used in Littrow configuration, they also permit to tune the wavelength of the emitted laser beam. Therefore they can replace a combination of etalons, birefringent filters, Brewster plates and/or thin-film polarizers usually employed for these tasks.

© 2013 IEEE

PDF Article
More Like This
Wavelength-selective grating mirrors for high-power thin-disk lasers

M. Abdou Ahmed, M. M. Vogel, A. Voss, and Th. Graf
CA3_1 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2009

Wavelength Control by Angle-Tuning of the Laser Radiation in an Intra-Cavity Pumped Yb:YAG Thin-Disk Laser

Christian Vorholt and Ulrich Wittrock
AM5A.39 Advanced Solid State Lasers (ASSL) 2015

A 1.1 kW CW intra-cavity frequency-doubled thin-disk laser

Tom Dietrich, Stefan Piehler, Martin Rumpel, Phillipe Villeval, Dominique Lupinski, Marwan Abdou Ahmed, and Thomas Graf
ATu6A.1 Advanced Solid State Lasers (ASSL) 2017

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription