Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Optical Fiber Transmission II Technical Digest
  • (Optica Publishing Group, 1977),
  • paper WB1

Progress In Leds As Signal Sources

Not Accessible

Your library or personal account may give you access


Since the early seventies a considerable R. and D. effort has been devoted to high power LED structures for applications as transmitting sources in optical fibre communication systems. The objective of high power operation requires the development of a device technology to provide high internal efficiency, minimum absorption within the semiconductor chip and efficient heat sinking to prevent excessive temperature rise within the device. The first two requirements are achieved by the choice of a direct gap semiconductor, optimisation of the acceptor and donor doping profiles and optimisation of the chip geometry. To achieve adequate heat sinking many of the techniques used in high-power, solid-state microwave devices have been applied to the LED to locate the active region in close proximity to a high thermal conductivity heat sink and to ensure low impedance interfaces between chip, contacts and heat sink without introducing significant damage or strain in the active region of the device.

© 1977 Optical Society of America

PDF Article
More Like This
GaAs Laser Source Package For Multichannel Optical Links

J. D. Crow, J. S. Harper, L. D. Comerford, M. J. Brady, and R. A. Laff
WB6 Optical Fiber Transmission (OFC) 1977

Laser Diodes for Fiber Communications

Henry Kressel
WB3 Optical Fiber Transmission (OFC) 1977

1000-Hour Continuous CW Operation Of Double-Heterostructure GaInAsP/Inp Lasers

C. C. Shen, J. J. Hsieh, and T. A. Lind
WB4 Optical Fiber Transmission (OFC) 1977

Select as filters

Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.