Abstract

Here, Gd-doped CsPbCl1.5Br1.5 nanocrystals (NCs) in borosilicate glass matrix (B2O3SiO2ZnO) were prepared by melting quenching and in-situ crystallization. The optical performance of CsPbCl1.5Br1.5 NCs glasses under different heat-treatment temperatures and the content of Gd3+ were analyzed in detail. After CsPbCl1.5Br1.5 NCs glass is doped with Gd3+ ions, the photoluminescence intensity increases and the synthesized Gd-doped CsPbCl1.5Br1.5 NCs glasses have excellent water stability and thermal cycling performance. In addition, the influence of Gd-doped concentrations and heat-treatment temperatures on the amplified spontaneous emission (ASE) thresholds of CsPbCl1.5Br1.5 NCs glasses was studied, and the Gd-doped CsPbCl1.5Br1.5 NCs glasses achieve controllable ASE thresholds at room temperature. The ASE threshold can be as low as 0.39mJ/cm2. This work offers a neoteric reference for the research in the application of metal ion-doped perovskite NCs and a new idea for the realization of controllable and low ASE thresholds on perovskite NCs.

© 2021 Chinese Laser Press

1. INTRODUCTION

Metal halide perovskites (i.e., CsPbX3, X = Cl, Br, and I) materials have broad application prospects in the fields of high-definition displays, solar cells, abyss communications, and optoelectronic devices [17]. As a direct bandgap semiconductor, perovskite has the advantages of the adjustable bandgap, high optical gain, large absorption coefficient, high quantum yield, and low defect state density [813]. It has become an ideal material for designing low-threshold, color laser devices [1419]. Despite such bright prospects, the rapid luminescence quenching and poor hydrothermal stability of perovskite nanocrystals (NCs) severely impede their practical applications in the laser field [20].

In order to optimize the stability of perovskite NCs, several different means have been employed [2125]. Protesescu et al. reported FAPbBr3 NCs with a strongly improved chemical stability during purification processes and good amplified spontaneous emission (ASE) properties [26]. Krieg et al. synthesized CsPbBr3 NCs with a low ASE threshold capped with zwitterionic long-chain molecules, which further improved the long-term stability of NCs [27]. Yan et al. recently modified the ligands by replacing the oleic acid (OA) ligands with 2-hexyldecanoic acid (DA) to improve the stability of CsPbBr3 NCs, and DA functionalized NCs showed a lower ASE threshold than OA affected NCs [28]. Although ligand modification, surface modification, and formation of core layer structure can effectively stabilize perovskite NCs [2933], there is still much room for improvement in stabilizing CsPbX3 NCs. Alternatively, since inorganic glass can protect CsPbX3 NCs from the external environment, embedding CsPbX3 NCs in glass has acted as one of the effective methods to improve the stability of perovskite NCs [34]. It is important that the perovskite NCs embedded in the glass not only exhibit ultrastable performance, but also have a low ASE threshold.

Although researchers have recently worked hard to adjust the ASE thresholds of perovskite NCs by adding organic molecular additives [35], zinc oxide nanoparticles [36], silver nanoparticles, [37], and changing the morphology and roughness of the sample [38], particle size also plays a vital role in regulating the ASE thresholds [39]. Fortunately, the size of perovskite NCs can be adjusted by controlling the doping of metal ions and the heat treatment temperatures. Furthermore, there are few reports linking the doping of metal ions and heat treatment conditions with the ASE thresholds of perovskite NCs at the same time. Based on the above, it is necessary to prepare a series of Gd-doped CsPbCl1.5Br1.5 NCs glasses to study the effect of Gd3+ concentrations and heat treatment temperatures on the ASE thresholds of perovskite NCs. Excitingly, the prepared Gd-doped CsPbCl1.5Br1.5 NCs glasses can exhibit ASE characteristics, and it is found that doping metal ions and heat treatment temperatures have a regulatory function on the ASE thresholds of Gd-doped CsPbCl1.5Br1.5 NCs glasses.

In this work, a series of Gd-doped CsPbCl1.5Br1.5 NCs emitting blue light were successfully synthesized in borosilicate glass by the traditional melting quenching method. The adjustment on the bandgap and wavelength of Gd-doped CsPbCl1.5Br1.5 NCs glasses can be achieved by changing the doping concentration and heat treatment temperature. Moreover, the prepared Gd-doped CsPbCl1.5Br1.5 NCs glass possesses good optical performance and excellent hydrothermal stability. Finally, under 800 nm fs pulsed laser at room temperature, not at low temperature, Gd-doped CsPbCl1.5Br1.5 NCs glasses can be used in the laser field, and the ASE threshold of Gd-doped CsPbCl1.5Br1.5 NCs glass is as low as 0.39mJ/cm2.

2. EXPERIMENT

A. Materials

Cesium carbonate (Cs2CO3, 99.9%), lead bromide (PbBr2, 99%), lead chloride (PbCl2, 98%), gadolinium fluoride (GdF3, 99.9%), sodium chloride (NaCl, 99.5%), sodium bromide (NaBr, 99.9%), silicon dioxide (SiO2, 99%), boron oxide (B2O3, 99.9%), and zinc oxide (ZnO, 99%) were bought from Aladdin. All chemicals were used without further treatment.

B. Synthesis of Gd-Doped CsPbCl1.5Br1.5 NCs Glasses

ZnO (molar percentage: 14.27%), B2O3 (32.80%), and SiO2 (28.27%) were first weighed as the glass matrix in the preparation of Gd-doped CsPbCl1.5Br1.5 NCs glasses. The three ingredients were mixed and milled uniformly in the mortar, and then NaBr (5.58%), NaCl (5.58%), PbBr2 (2.48%), PbCl2 (2.48%), and Cs2CO3 (8.54%) were put into the alumina crucible. The crucible was put in the heating furnace and was heated to 1200°C for 10 min to ensure that everything melts. Then the crucible was taken out and poured into a grinding tool preheated to 400°C. After the glass was slightly shaped, it was quickly put in an oven at 400°C and heated for 3 h and cooled to room temperature naturally. This heat preservation process is a necessary process, called annealing. It is designed to eliminate the internal stress of the CsPbCl1.5Br1.5 NCs precursor glass and prevent the newly formed glass melt from breaking due to a sudden drop in temperature. A series of Gd-doped CsPbCl1.5Br1.5 NCs glasses were obtained by regulating the concentration of GdF3 (GdF3 concentration of 0%, 0.5%, 1%, 3%, respectively marked as S1, S2, S3, and S4).

C. Characterization

Using Bruker D8 Advance measurement, the phase structure of the samples was characterized by X-ray diffraction (XRD). It is pointed out that the CuKα radiation of Bruker D8 Advance measurements was running in the boundary of 10°–60° (2θ) at the velocity of 0.02° per second (the current as 40 mA and the voltage as 40 kV). The ultraviolet–visible (UV-vis) spectra were surveyed by a PerkinElmer 750 UV-vis spectrometer, and the recording scope was 400–600 nm. The JEOL JEm-2100F transmission electron microscope (TEM) was used to observe the microstructure of perovskite NCs. The distribution of elements was tested with TEM-assisted energy dispersive spectrometer (EDS). The temperature-dependent photoluminescence (PL) spectra were measured with THMS 600. Under the excitation of the commercially available Ti:sapphire regenerative amplifier (800 nm, 35 fs, 1 kHz) at room temperature, the ASE of perovskite NCs glasses has been actively studied. A cylindrical lens with a focal length of 10 cm was used to focus the laser beam onto the surface of the sample. Adjustable slits could be used to precisely control the fringe length of the light spot. The ASE was detected by a fiber optic spectrometer (Marine Optics) with a spectral resolution of 1 nm. The fluorescence and absorption measurements are all under the same excitation wavelength of 365 nm.

3. RESULTS AND DISCUSSION

The network structure of borosilicate glass is silicon oxide tetrahedron, which is mainly composed of bridged and non-bridged oxygen bonds. In the precursor borosilicate glass, Cs+, Pb2+, Gd3+, F, Cl, and Br ions are distributed in the borosilicate glass. Once external conditions give these ions enough energy to reach the formation energy of Gd-doped CsPbCl1.5Br1.5 NCs, Cs+, Pb2+, Cl, and Br ions will migrate to the network voids to nucleate and grow. However, due to the inconsistent size of the network voids, the size of the formed perovskite NCs is also not uniform [40]. To explore the optimal Gd3+ concentration in CsPbCl1.5Br1.5 NCs glasses, a series of Gd-doped CsPbCl1.5Br1.5 NCs glasses were synthesized, and they all emitted bright blue light under UV light [Fig. 1(c)]. Then, the PL of Gd-doped CsPbCl1.5Br1.5 NCs glasses was tested. As shown in Fig. 1(a), a certain amount of Gd3+ doping promotes the increase of the PL intensity of CsPbCl1.5Br1.5 NCs glasses, but excessive Gd3+ doping quenches the PL intensity of CsPbCl1.5Br1.5 NCs glasses. It can be concluded that the best Gd3+ doping in CsPbCl1.5Br1.5 NCs glasses is found to be 1% (S3). The quantum efficiencies of S1–S4 are 5.1%, 10.3%, 12%, and 2%, respectively. Gd3+ doping improves the optical performance of CsPbCl1.5Br1.5 NCs glasses because Gd3+ ions reduce defects, which enhances radiative recombination and reduces non-radiative recombination paths [41]. As for F ion, F ion promotes a part of Gd3+ doping into CsPbCl1.5Br1.5 NCs glasses by fracturing the silicon–oxygen bonds and generating non-bridging oxygen bonds [42]. In addition, the PL emission peak position has a slight blueshift as the Gd3+ concentration increases, which may be because part of Gd3+ replaces Pb2+ caused by the reduction of the particle size. Figure 1(b) shows that as the Gd3+ concentration increases, the bandgap energy increases, which is caused by more Gd3+ entering the lattice leading to the shrinkage of the perovskite NCs lattice. Since perovskite NCs are direct interband transitions, the formula can be used to calculate the optical bandgap Eg of Gd-doped CsPbCl1.5Br1.5 NCs glasses as follows [43]:

(αhν)2=A(hνEg),
where A is the parameter concerning the effective mass of the valence and conduction bands, h is Planck’s constant, α is the absorption coefficient, and ν represents the optical frequency.
 figure: Fig. 1.

Fig. 1. (a) PL spectra. (b) Spectra plotted as (αhν)2hν of Gd-doped CsPbCl1.5Br1.5 NCs glasses. (c) Photos of a series of Gd-doped CsPbCl1.5Br1.5 NCs glasses (S1–S4) (from left to light) in daylight and ultraviolet (UV) light.

Download Full Size | PPT Slide | PDF

Next, the phase structure and microstructure of Gd-doped CsPbCl1.5Br1.5 NCs glasses were analyzed. It can be seen from Fig. 2(d) that the diffraction peaks are located between the standard diffraction cards (PDF#54–0752 is the standard diffraction card of cubic CsPbBr3 and PDF#18–0366 is the standard diffraction card of cubic CsPbCl3), demonstrating that the CsPbCl1.5Br1.5 NCs were successfully precipitated in the borosilicate glass matrix. In addition, it can also be seen that the diffraction peak intensities of doped and undoped CsPbCl1.5Br1.5 NCs glasses are quite strong, indicating that the crystallinity of the perovskite NCs in S1–S4 is good. It needs to be emphasized that, with the increase of Gd3+ content, the XRD peaks of CsPbCl1.5Br1.5 NCs glasses move slightly to a larger angle. This shift is attributed to the contraction of the crystal lattice, which is due to the partial replacement of Pb2+ with a larger radius by Gd3+ with a smaller radius. From the perspective of microstructure, it can be clearly seen from the TEM image [Fig. 2(a)] that Gd-doped CsPbCl1.5Br1.5 NCs with a circular shape are embedded in the glass matrix. By comparing the high-resolution transmission electron microscope (HRTEM) of doped (S3) and undoped Gd3+ (S1), it is concluded that the (1 1 1) lattice fringe spacing of Gd3+ doped CsPbCl1.5Br1.5 NCs glass is obviously reduced [Figs. 2(b) and 2(c)]. This is the result from partial Gd3+ doped into CsPbCl1.5Br1.5 NCs glass that causes the crystal lattice to shrink [44]. Figures 2(e)–2(j) show the EDS element distribution of a part of Gd-doped CsPbCl1.5Br1.5 NCs glass, which confirms the presence of F, Cl, Br, Cs, Pb, and Gd in Gd-doped CsPbCl1.5Br1.5 NCs glass.

 figure: Fig. 2.

Fig. 2. (a) TEM image of Gd-doped CsPbCl1.5Br1.5 NCs glass. (b) HRTEM image of CsPbCl1.5Br1.5 NCs glass (S1). (c) HRTEM image of Gd-doped CsPbCl1.5Br1.5 NCs glass (S3). (d) XRD patterns of Gd-doped CsPbCl1.5Br1.5 NCs glasses. (e)–(j) EDS elemental mappings of Gd-doped CsPbCl1.5Br1.5 NCs glass.

Download Full Size | PPT Slide | PDF

The particle size of CsPbCl1.5Br1.5 NCs can not only be controlled by metal ions doping, but temperature is also one of the factors that affect the size of the perovskite NCs [45]. Therefore, the different heat treatment temperatures (470°C–10 h, 500°C–10 h, and 530°C–10 h) of Gd-doped CsPbCl1.5Br1.5 NCs glasses were explored. As shown in Fig. 3(b), the intensity of PL first increases and then decreases. This is because a proper increase of the heat-treatment temperature is beneficial to the formation and growth of Gd-doped CsPbCl1.5Br1.5 NCs, which will cause the intensity of PL to increase. However, the Gd-doped CsPbCl1.5Br1.5 NCs become larger when the heat-treatment temperature exceeds the optimal temperature, causing the aggregation of perovskite NCs, which will lead to concentration quenching and weaken the intensity of PL [46]. As the heat-treatment temperature increases from 470°C to 530°C, the intensity of XRD diffraction peaks becomes stronger and tends to shift slightly to a low angle [Fig. 3(a)] for the increase in size of perovskite NCs. The increase in the size of Gd-doped CsPbCl1.5Br1.5 NCs will result in a redshift of the PL peak position [Fig. 3(b)] and a decrease in the bandgap [Fig. 3(d)]. In Fig. 3(c), due to the Stokes shift [47], the edge of the absorption spectrum will be located near the PL peak of the corresponding sample. The precise control of the absorption [Fig. 3(c)] and bandgap [Fig. 3(d)] of Gd-doped CsPbCl1.5Br1.5 NCs glasses can be successfully achieved by changing the heat treatment temperature.

 figure: Fig. 3.

Fig. 3. (a) XRD patterns, (b) PL spectra, (c) UV-vis absorption spectra. (d) Spectra plotted as (αhν)2hν of Gd-doped CsPbCl1.5Br1.5 NCs glasses (470°C–530°C).

Download Full Size | PPT Slide | PDF

The quality of the prepared perovskite NCs should be considered, including good optical properties and good stability. Therefore, it is necessary to test the hydrothermal stability of Gd-doped CsPbCl1.5Br1.5 NCs glass (S3). The heat resistance of Gd-doped CsPbCl1.5Br1.5 NCs glass is pictured in Fig. 4(a). Even after heating, cooling, and reheating, the optical properties of the Gd-doped CsPbCl1.5Br1.5 NCs glass can be restored to the original state, showing excellent thermal cycling performance. As shown in Fig. 4(c), the Gd-doped CsPbCl1.5Br1.5 NCs glass (S3) was immersed in water, and it can be observed that the S3 remains bright blue light after being stored in water for 30 days without any significant changes, because the borosilicate glass substrate as an ideal protective layer can effectively isolate the Gd-doped CsPbCl1.5Br1.5 NCs from the harsh external environment. PL measurements were performed at different times [Fig. 4(b)], and the results show that even after 30 days, the intensity of PL remains around 96%. The above indicates that the Gd-doped CsPbCl1.5Br1.5 NCs glass has excellent water resistance. All in all, the prepared Gd-doped CsPbCl1.5Br1.5 NCs glass has excellent water/heat resistance.

 figure: Fig. 4.

Fig. 4. (a) PL intensity measured during heating, cooling, and reheating. (b) Time-dependent PL intensity. (c) Luminescent photographs of S3 stored in water for different times.

Download Full Size | PPT Slide | PDF

The laser mechanism of Gd-doped CsPbCl1.5Br1.5 NCs glasses is that randomly arranged Gd-doped CsPbCl1.5Br1.5 NCs work as both a gain medium and multiple scattering sources. The emitted light undergoes multiple scattering at the grain boundaries and finally returns to the path where they were scattered before, thereby forming a closed-loop cavity. When the optical gain exceeds the loss, laser oscillation is generated at the resonant frequency of the corresponding feedback loop [48]. A series of Gd-doped CsPbCl1.5Br1.5 NCs glasses were subjected to 800 nm fs laser experiments at room temperature to explore the relationship between metal ion doping and ASE thresholds. As shown in Figs. 5(a), 5(c), 5(e), and 5(g), when the pump density is lower than the power density that can reach the threshold, the emission spectrum shows a broad emission, namely spontaneous emission (SE), which dominates the PL spectrum of Gd-doped CsPbCl1.5Br1.5 NCs glass. But when the pump density exceeds the power density that can achieve the threshold, the sharp increase in the output intensity of Gd-doped CsPbCl1.5Br1.5 NCs glass is accompanied by a sharp decrease in full width at half-maximum (FWHM), which is the transition from SE to ASE [49]. In the ASE measurement, the blueshift of SE can indeed be attributed to the phase separation of the perovskite NCs. This is because the local electric field destroys the ionic bonds in the mixed halogen NCs [50]. In addition, ASE is located at 510nm, which indeed comes from the CsPbBr3-rich phase. In addition, it is found that the ASE peak has a redshift relative to the SE peak, which is caused by the recombination of double excitons [51,52]. Figure 5(b) shows the intensity (blue line) and FWHM (red line) versus pump density. It can be observed that when the pump density exceeds 0.54mJ/cm2, the spectra become narrower and the output intensity increases, so Pth=0.54mJ/cm2 is regarded as the ASE threshold of S1. By analogy, the thresholds of S2–S4 are 0.81mJ/cm2, 0.85mJ/cm2, and 1.22mJ/cm2, respectively [Figs. 5(d), 5(f), and 5(h)]. The gradual increase in the thresholds of Gd-doped CsPbCl1.5Br1.5 NCs glasses (S1–S4) is caused by the decrease in the particle size of the perovskite NCs, which also confirms the fact that partial Gd3+ ions have been doped into CsPbCl1.5Br1.5 NCs.

 figure: Fig. 5.

Fig. 5. (a), (c), (e), (g) Pump intensity-dependent PL spectra under increasing 800 nm fs pulsed excitation fluence from the Gd-doped CsPbCl1.5Br1.5 NCs glasses (S1–S4). (b), (d), (f), (h) Dependence of the integrated emission intensity (blue lines) and FWHM (red lines) of the emission spectra as a function of pumping density under 800 nm fs laser excitation (S1–S4).

Download Full Size | PPT Slide | PDF

The effect of Gd-doped CsPbCl1.5Br1.5 NCs glasses with different heat treatment temperatures on the ASE thresholds was also researched. As shown in Figs. 6(a)–6(c), the Gd-doped CsPbCl1.5Br1.5 NCs glasses with different heat-treatment temperatures have ASE phenomena when the pump density is increased. In addition, the threshold of Gd-doped CsPbCl1.5Br1.5 NCs glasses decreases with the increase of heat treatment temperature (470°C–530°C), and the ASE threshold can be as low as 0.39mJ/cm2 [Figs. 6(d)–6(f)]. This is the result of the increase in the heat treatment temperature that causes the Gd-doped CsPbCl1.5Br1.5 NCs particles to become larger. In short, increasing the heat treatment temperature can obtain Gd-doped CsPbCl1.5Br1.5 NCs glass with better crystallinity and larger grain size, making it more suitable for laser applications.

 figure: Fig. 6.

Fig. 6. (a)–(c) Pump intensity-dependent PL spectra under increasing 800 nm fs pulsed excitation fluence from the Gd-doped CsPbCl1.5Br1.5 NCs glasses (470°C–530°C). (d)–(f) Dependence of the integrated emission intensity (blue lines) and FWHM (red lines) of the emission spectra as a function of pumping density under 800 nm fs laser excitation (470°C–530°C).

Download Full Size | PPT Slide | PDF

4. CONCLUSION

In summary, a series of Gd-doped CsPbCl1.5Br1.5 NCs glasses in borosilicate glass (SiO2B2O3ZnO) were successfully prepared. The PL intensity of CsPbCl1.5Br1.5 NCs glasses can be improved after doping with Gd3+ ions. Specifically, the structure and optical aspect of Gd-doped CsPbCl1.5Br1.5 NCs glasses were studied deeply. Furthermore, Gd-doped CsPbCl1.5Br1.5 NCs glass shows excellent hydrothermal resistance. It is uplifting that Gd-doped CsPbCl1.5Br1.5 NCs glasses can be applied in the ASE field. By studying the effect of different Gd3+ doping concentrations and heat treatment temperatures on the CsPbCl1.5Br1.5 NCs glasses, it is clarified that the ASE thresholds of perovskite NCs can be adjusted, which lays the foundation for creating more possibilities for the application of perovskite NCs in the laser field in the future.

Funding

National Natural Science Foundation of China (51872207, 52072271).

Disclosures

The authors declare no competing financial interests.

REFERENCES

1. H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021). [CrossRef]  

2. J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021). [CrossRef]  

3. X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019). [CrossRef]  

4. F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020). [CrossRef]  

5. V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021). [CrossRef]  

6. Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020). [CrossRef]  

7. G. Li, R. Gao, Y. Han, A. Zhai, Y. Liu, Y. Tian, B. Tian, Y. Hao, S. Liu, Y. Wu, and Y. Cui, “High detectivity photodetectors based on perovskite nanowires with suppressed surface defects,” Photon. Res. 8, 1862–1874 (2020). [CrossRef]  

8. J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015). [CrossRef]  

9. L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015). [CrossRef]  

10. M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021). [CrossRef]  

11. C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021). [CrossRef]  

12. S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020). [CrossRef]  

13. C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020). [CrossRef]  

14. B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020). [CrossRef]  

15. Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020). [CrossRef]  

16. D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020). [CrossRef]  

17. J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021). [CrossRef]  

18. Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020). [CrossRef]  

19. S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021). [CrossRef]  

20. H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020). [CrossRef]  

21. J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020). [CrossRef]  

22. H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020). [CrossRef]  

23. F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021). [CrossRef]  

24. S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021). [CrossRef]  

25. S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019). [CrossRef]  

26. L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016). [CrossRef]  

27. F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018). [CrossRef]  

28. D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019). [CrossRef]  

29. Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021). [CrossRef]  

30. F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021). [CrossRef]  

31. Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020). [CrossRef]  

32. W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020). [CrossRef]  

33. W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020). [CrossRef]  

34. X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020). [CrossRef]  

35. T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017). [CrossRef]  

36. C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017). [CrossRef]  

37. P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018). [CrossRef]  

38. N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019). [CrossRef]  

39. M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021). [CrossRef]  

40. Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019). [CrossRef]  

41. C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019). [CrossRef]  

42. D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019). [CrossRef]  

43. E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020). [CrossRef]  

44. G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019). [CrossRef]  

45. X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021). [CrossRef]  

46. Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020). [CrossRef]  

47. L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018). [CrossRef]  

48. M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019). [CrossRef]  

49. D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020). [CrossRef]  

50. H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019). [CrossRef]  

51. Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015). [CrossRef]  

52. S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020). [CrossRef]  

References

  • View by:

  1. H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
    [Crossref]
  2. J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
    [Crossref]
  3. X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
    [Crossref]
  4. F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
    [Crossref]
  5. V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
    [Crossref]
  6. Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020).
    [Crossref]
  7. G. Li, R. Gao, Y. Han, A. Zhai, Y. Liu, Y. Tian, B. Tian, Y. Hao, S. Liu, Y. Wu, and Y. Cui, “High detectivity photodetectors based on perovskite nanowires with suppressed surface defects,” Photon. Res. 8, 1862–1874 (2020).
    [Crossref]
  8. J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
    [Crossref]
  9. L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
    [Crossref]
  10. M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
    [Crossref]
  11. C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
    [Crossref]
  12. S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
    [Crossref]
  13. C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
    [Crossref]
  14. B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
    [Crossref]
  15. Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
    [Crossref]
  16. D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
    [Crossref]
  17. J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
    [Crossref]
  18. Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
    [Crossref]
  19. S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
    [Crossref]
  20. H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
    [Crossref]
  21. J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
    [Crossref]
  22. H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
    [Crossref]
  23. F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
    [Crossref]
  24. S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
    [Crossref]
  25. S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
    [Crossref]
  26. L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
    [Crossref]
  27. F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
    [Crossref]
  28. D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
    [Crossref]
  29. Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
    [Crossref]
  30. F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
    [Crossref]
  31. Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
    [Crossref]
  32. W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
    [Crossref]
  33. W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
    [Crossref]
  34. X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
    [Crossref]
  35. T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
    [Crossref]
  36. C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
    [Crossref]
  37. P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
    [Crossref]
  38. N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
    [Crossref]
  39. M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
    [Crossref]
  40. Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
    [Crossref]
  41. C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
    [Crossref]
  42. D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
    [Crossref]
  43. E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
    [Crossref]
  44. G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
    [Crossref]
  45. X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
    [Crossref]
  46. Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
    [Crossref]
  47. L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
    [Crossref]
  48. M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019).
    [Crossref]
  49. D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
    [Crossref]
  50. H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
    [Crossref]
  51. Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
    [Crossref]
  52. S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
    [Crossref]

2021 (13)

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
[Crossref]

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

2020 (20)

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
[Crossref]

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020).
[Crossref]

G. Li, R. Gao, Y. Han, A. Zhai, Y. Liu, Y. Tian, B. Tian, Y. Hao, S. Liu, Y. Wu, and Y. Cui, “High detectivity photodetectors based on perovskite nanowires with suppressed surface defects,” Photon. Res. 8, 1862–1874 (2020).
[Crossref]

2019 (10)

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

2018 (3)

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

2017 (2)

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

2016 (1)

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

2015 (3)

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Aellen, P.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Anni, M.

M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019).
[Crossref]

Antonicelli, G.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Baeva, M.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Bai, X.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Bai, Z.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Bappi, G.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Becker-Koch, D.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Bertens, K.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Bertolotti, F.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

Bodnarchuk, M. I.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Brinck, S. T.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Cai, W.

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

Cao, E.

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Cao, F.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Cao, M.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Caputo, R.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Cegielski, P. J.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Cehovski, M.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Chang, S. W.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Charfi, O.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Chen, B.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Chen, C. C.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Chen, C. W.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Chen, D.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Chen, G.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Chen, H.

H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Chen, J.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Chen, K.-H.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Chen, L.-C.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Chen, R.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Chen, S.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Chen, Y.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Chen, Y.-F.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Cheng, Y.

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Chhowalla, M.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Chi, M.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Choubisa, H.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Chu, C. W.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Clerc, B.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Cortizo-Lacalle, D.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Cui, Y.

De Giorgi, M. L.

M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019).
[Crossref]

Delaunay, J. J.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Demir, M. M.

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Ding, L.

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

Doblinger, M.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Dong, H.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Dong, Y.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Dong, Z.

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Du, J.

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Feil, M. W.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Feldmann, J.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Feng, J.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Fu, X.

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Gao, F.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020).
[Crossref]

Gao, R.

Gao, X.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Gao, Y.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Garcia-Pomar, J. L.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Giesecke, A. L.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Gong, Q.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Gorrn, P.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Guagliardi, A.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

Guan, H.

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

Guan, W.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Guan, X.

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

Guggisberg, D.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Guo, J.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Guo, T.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Guo, X.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Guvenc, C. M.

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Haeger, T.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Haider, G.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Han, C.

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Han, Y.

Hao, Y.

Harn, Y.-W.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

He, F.

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

He, Q.

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

He, Z.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Heiderhoff, R.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Hendon, C. H.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Henkel, A.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Ho, Y. L.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Hoogland, S.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Hou, X.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Hsieh, Y. H.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Hsu, B. W.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Hu, A.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Hu, Y.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Hu, Z.

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Hua, Y.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Huang, F.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

Huang, H.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Huang, S.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Infante, I.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Jen, A. K.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Jia, G.

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Jiang, L.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Jiang, N.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

Jiang, X.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Jiao, B.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Jin, M.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

Jin, Z.

H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

Johannes, H. H.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Kamal, A. S. A.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Kirilenko, D. A.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Koch, M.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Kong, L.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

Kovalenko, M. V.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Kowalsky, W.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Krieg, F.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Kumar, S.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Lee, K. W.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Lei, D.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Lemme, M. C.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Leng, Y.

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Lewis, S. W.

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

Li, C.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Li, D.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Li, E.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Li, F.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Li, G.

Li, J.

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Li, P.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Li, S.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Li, W.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Li, X.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Li, Y.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

Li, Z.

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Liang, C.-T.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Liang, X.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

Liao, Y.-M.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Lin, C. C.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Lin, H.

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Lin, H. W.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Lin, H.-I.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Lin, J.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

Lin, W.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Lin, Z.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Liu, H.

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Liu, J.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

Liu, M.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

Liu, S.

G. Li, R. Gao, Y. Han, A. Zhai, Y. Liu, Y. Tian, B. Tian, Y. Hao, S. Liu, Y. Wu, and Y. Cui, “High detectivity photodetectors based on perovskite nanowires with suppressed surface defects,” Photon. Res. 8, 1862–1874 (2020).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Liu, W.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

Liu, X.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

Liu, Y.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

G. Li, R. Gao, Y. Han, A. Zhai, Y. Liu, Y. Tian, B. Tian, Y. Hao, S. Liu, Y. Wu, and Y. Cui, “High detectivity photodetectors based on perovskite nanowires with suppressed surface defects,” Photon. Res. 8, 1862–1874 (2020).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Liu, Z.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Liz-Marzan, L. M.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Lu, C.-H.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Lu, J.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Lu, M.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Lu, P.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Lu, Y.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

Lu, Y. J.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Luo, Y.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Ma, F.

Makarov, S. V.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Manzi, A.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Markina, D. I.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Martinez-Pastor, J. P.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Masciocchi, N.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

Mateo-Alonso, A.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Mayer, A.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Meerholz, K.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Mei, E.

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

Mihi, A.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Mo, Q.

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

Mora-Sero, I.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Mou, N.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Mukhin, I. S.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Najarian, A. M.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Nazarenko, O.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Neplokh, V.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Ngo, T. T.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Ochsenbein, S. T.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Olthof, S.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Ozen, S.

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Pan, S.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Pang, R.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Parmar, D. H.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Pavlov, A. M.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Peng, G.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Peng, J.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Peng, K. N.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Pina, J. M.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Polavarapu, L.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Pourdavoud, N.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Protesescu, L.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Pushkarev, A. P.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Qiu, J.

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Qiu, Y.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Quan, C.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

Ren, J.

J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
[Crossref]

Ren, W.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Riedl, T.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Rogach, A. L.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Rogalla, D.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Roy, P. K.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Sagar, L. K.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Sahin, H.

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Saidaminov, M. I.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Sargent, E. H.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Scheer, H. C.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Serdobintsev, A. A.

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Shao, G.

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Shen, L.

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

Shen, X.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Shi, T.

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Shi, W.

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

Shi, Z.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Shih, C. J.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Shih, W.-H.

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Shutsko, I.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Shynkarenko, Y.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Smith, M. J.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Song, J.

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Stein, M.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Suarez, I.

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

Suess, A.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

Sun, H.

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Sun, K.

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Sun, S.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Tan, T.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Tang, B.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

Tang, X.

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Tang, Y.

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Tian, B.

Tian, Y.

Tsukruk, V. V.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Vafaie, M.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Vaynzof, Y.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Vila-Liarte, D.

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Walsh, A.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Wang, A.

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Wang, C.

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Wang, H.

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Wang, I. T.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Wang, L.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Wang, M.

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

Wang, Q.

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Wang, S.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Wang, W.

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

Wang, X.

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Wang, Y.

J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
[Crossref]

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Wang, Z.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

Wei, Y.

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Wen, C. Y.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Wen, Y.

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Wu, S.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Wu, Y.

Wu, Z.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Xiang, W.

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

Xiang, X.

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Xiao, L.

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Xiao, M.

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Xie, C.

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

Xie, H.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Xing, D.

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

Xu, H.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

Xu, J.

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

Xu, L.

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Xu, Y.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Xue, W.

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

Yakunin, S.

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Yalcinkaya, Y.

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Yan, D.

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Yang, C.

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Yang, H.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Yang, P.

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

Yang, R. X.

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Yang, W.

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

Yang, X.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Yang, Y.

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Ye, H.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Yen, T. J.

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

Yin, Z.

You, J.

Yu, J.

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Yu, W.

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Yu, W. W.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Yu, Y.

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

Yuan, F.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Zaefferer, S.

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

Zang, Z.

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

Zeng, H.

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Zhai, A.

Zhang, C.

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Zhang, H.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

Zhang, L.

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Zhang, M.

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

Zhang, Q.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Zhang, S.

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

Zhang, W.

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

Zhang, X.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020).
[Crossref]

Zhang, Y.

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

Zhang, Z.

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Zhao, S.

S. Zhao, Q. Mo, W. Cai, H. Wang, and Z. Zang, “Inorganic lead-free cesium copper chlorine nanocrystal for highly efficient and stable warm white light-emitting diodes,” Photon. Res. 9, 1605–1612 (2021).
[Crossref]

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

Zhao, Y.

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

Y. Zhao, F. Ma, F. Gao, Z. Yin, X. Zhang, and J. You, “Research progress in large-area perovskite solar cells,” Photon. Res. 8, A1–A15 (2020).
[Crossref]

Zheng, Z.

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

Zhong, H.

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Zhong, J.

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Zhong, Q.

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Zhou, C.

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

Zhou, D.

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Zhou, F.

H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

Zhou, S.

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Zhou, T.

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Zhou, X.

J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
[Crossref]

Zhu, L.

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Zhu, W.

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

Zhu, Y.

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

ACS Appl. Mater. Interfaces (2)

X. Li, C. Yang, Y. Yu, Z. Li, J. Lin, X. Guan, Z. Zheng, and D. Chen, “Dual-modal photon upconverting and downshifting emissions from ultra-stable CsPbBr3 perovskite nanocrystals triggered by co-growth of Tm:NaYbF4 nanocrystals in glass,” ACS Appl. Mater. Interfaces 12, 18705–18714 (2020).
[Crossref]

L. Zhang, F. Yuan, H. Dong, B. Jiao, W. Zhang, X. Hou, S. Wang, Q. Gong, and Z. Wu, “One-step co-evaporation of all-inorganic perovskite thin films with room-temperature ultralow amplified spontaneous emission threshold and air stability,” ACS Appl. Mater. Interfaces 10, 40661–40671 (2018).
[Crossref]

ACS Energy Lett. (2)

F. Krieg, S. T. Ochsenbein, S. Yakunin, S. T. Brinck, P. Aellen, A. Suess, B. Clerc, D. Guggisberg, O. Nazarenko, Y. Shynkarenko, S. Kumar, C. J. Shih, I. Infante, and M. V. Kovalenko, “Colloidal CsPbX3 (X = Cl, Br, I) nanocrystals 2.0: Zwitterionic capping ligands for improved durability and stability,” ACS Energy Lett. 3, 641–646 (2018).
[Crossref]

J. Lin, Y. Lu, X. Li, F. Huang, C. Yang, M. Liu, N. Jiang, and D. Chen, “Perovskite quantum dots glasses based backlit displays,” ACS Energy Lett. 6, 519–528 (2021).
[Crossref]

ACS Nano (1)

Y. H. Hsieh, B. W. Hsu, K. N. Peng, K. W. Lee, C. W. Chu, S. W. Chang, H. W. Lin, T. J. Yen, and Y. J. Lu, “Perovskite quantum dot lasing in a gap-plasmon nanocavity with ultralow threshold,” ACS Nano 14, 11670–11676 (2020).
[Crossref]

ACS Photonics (1)

X. Liu, E. Mei, Z. Liu, J. Du, X. Liang, and W. Xiang, “Stable, low-threshold amplification spontaneous emission of blue-emitting CsPbCl2Br1 perovskite nanocrystals glasses with controlled crystallization,” ACS Photonics 8, 887–893 (2021).
[Crossref]

Adv. Energy Mater. (1)

H. Wang, Z. Dong, H. Liu, W. Li, L. Zhu, and H. Chen, “Roles of organic molecules in inorganic CsPbX3 perovskite solar cells,” Adv. Energy Mater. 11, 2002940 (2020).
[Crossref]

Adv. Funct. Mater. (2)

D. Xing, C. C. Lin, Y. L. Ho, A. S. A. Kamal, I. T. Wang, C. C. Chen, C. Y. Wen, C. W. Chen, and J. J. Delaunay, “Self-healing lithographic patterning of perovskite nanocrystals for large-area single-mode laser array,” Adv. Funct. Mater. 31, 2006283 (2020).
[Crossref]

F. Li, S. Huang, X. Liu, Z. Bai, Z. Wang, H. Xie, X. Bai, and H. Zhong, “Highly stable and spectrally tunable gamma phase RbxCs1–xPbI3 gradient-alloyed quantum dots in PMMA matrix through a sites engineering,” Adv. Funct. Mater. 31, 2008211 (2021).
[Crossref]

Adv. Mater. (6)

T. T. Ngo, I. Suarez, G. Antonicelli, D. Cortizo-Lacalle, J. P. Martinez-Pastor, A. Mateo-Alonso, and I. Mora-Sero, “Enhancement of the performance of perovskite solar cells, LEDs, and optical amplifiers by anti-solvent additive deposition,” Adv. Mater. 29, 1604056 (2017).
[Crossref]

N. Pourdavoud, T. Haeger, A. Mayer, P. J. Cegielski, A. L. Giesecke, R. Heiderhoff, S. Olthof, S. Zaefferer, I. Shutsko, A. Henkel, D. Becker-Koch, M. Stein, M. Cehovski, O. Charfi, H. H. Johannes, D. Rogalla, M. C. Lemme, M. Koch, Y. Vaynzof, K. Meerholz, W. Kowalsky, H. C. Scheer, P. Gorrn, and T. Riedl, “Room-temperature stimulated emission and lasing in recrystallized cesium lead bromide perovskite thin films,” Adv. Mater. 31, 1903717 (2019).
[Crossref]

J. M. Pina, D. H. Parmar, G. Bappi, C. Zhou, H. Choubisa, M. Vafaie, A. M. Najarian, K. Bertens, L. K. Sagar, Y. Dong, Y. Gao, S. Hoogland, M. I. Saidaminov, and E. H. Sargent, “Deep-blue perovskite single-mode lasing through efficient vapor-assisted chlorination,” Adv. Mater. 33, 2006697 (2021).
[Crossref]

C. Zhang, J. Chen, S. Wang, L. Kong, S. W. Lewis, X. Yang, A. L. Rogach, and G. Jia, “Metal halide perovskite nanorods: shape matters,” Adv. Mater. 32, 2002736 (2020).
[Crossref]

J. Song, J. Li, X. Li, L. Xu, Y. Dong, and H. Zeng, “Quantum dot light-emitting diodes based on inorganic perovskite cesium lead halides (CsPbX3),” Adv. Mater. 27, 7162–7167 (2015).
[Crossref]

Y. Wang, X. Li, J. Song, L. Xiao, H. Zeng, and H. Sun, “All-inorganic colloidal perovskite quantum dots: a new class of lasing materials with favorable characteristics,” Adv. Mater. 27, 7101–7108 (2015).
[Crossref]

Adv. Opt. Mater. (4)

P. K. Roy, G. Haider, H.-I. Lin, Y.-M. Liao, C.-H. Lu, K.-H. Chen, L.-C. Chen, W.-H. Shih, C.-T. Liang, and Y.-F. Chen, “Multicolor ultralow-threshold random laser assisted by vertical-graphene network,” Adv. Opt. Mater. 6, 1800382 (2018).
[Crossref]

Z. He, B. Chen, Y. Hua, Z. Liu, Y. Wei, S. Liu, A. Hu, X. Shen, Y. Zhang, Y. Gao, and J. Liu, “CMOS compatible high-performance nanolasing based on perovskite–SiN hybrid integration,” Adv. Opt. Mater. 8, 2000453 (2020).
[Crossref]

S. Wang, J. Yu, H. Ye, M. Chi, H. Yang, H. Wang, F. Cao, W. Li, L. Kong, L. Wang, R. Chen, and X. Yang, “Low-threshold amplified spontaneous emission in blue quantum dots enabled by effectively suppressing Auger recombination,” Adv. Opt. Mater. 9, 2100068 (2021).
[Crossref]

Q. Zhong, J. Liu, S. Chen, P. Li, J. Chen, W. Guan, Y. Qiu, Y. Xu, M. Cao, and Q. Zhang, “Highly stable CsPbX3/PbSO4 core/shell nanocrystals synthesized by a simple post-treatment strategy,” Adv. Opt. Mater. 9, 2001763 (2020).
[Crossref]

Angew. Chem. (1)

D. Vila-Liarte, M. W. Feil, A. Manzi, J. L. Garcia-Pomar, H. Huang, M. Doblinger, L. M. Liz-Marzan, J. Feldmann, L. Polavarapu, and A. Mihi, “Templated-assembly of CsPbBr3 perovskite nanocrystals into 2D photonic supercrystals with amplified spontaneous emission,” Angew. Chem. 59, 17750–17756 (2020).
[Crossref]

Appl. Sci. (1)

M. L. De Giorgi and M. Anni, “Amplified spontaneous emission and lasing in lead halide perovskites: state of the art and perspectives,” Appl. Sci. 9, 4591 (2019).
[Crossref]

CCS Chem. (1)

W. Xue, X. Wang, W. Wang, F. He, W. Zhu, and Y. Li, “Aluminum distearate–modified CsPbX3 (X = I, Br, or Cl/Br) nanocrystals with enhanced optical and structural stabilities,” CCS Chem. 2, 13–23 (2020).
[Crossref]

Chem. Commun. (1)

E. Cao, J. Qiu, D. Zhou, Y. Yang, Q. Wang, and Y. Wen, “The synthesis of a perovskite CsPbBr3 quantum dot superlattice in borosilicate glass,” Chem. Commun. 56, 4460–4463 (2020).
[Crossref]

Chem. Eng. J. (6)

G. Shao, S. Liu, L. Ding, Z. Zhang, W. Xiang, and X. Liang, “KxCs1−xPbBr3 NCs glasses possessing super optical properties and stability for white light emitting diodes,” Chem. Eng. J. 375, 122031 (2019).
[Crossref]

Z. Zhang, L. Shen, H. Zhang, L. Ding, G. Shao, X. Liang, and W. Xiang, “Novel red-emitting CsPb1−xTixI3 perovskite QDs@glasses with ambient stability for high efficiency white LEDs and plant growth LEDs,” Chem. Eng. J. 378, 122125 (2019).
[Crossref]

F. Gao, W. Yang, X. Liu, Y. Li, W. Liu, H. Xu, and Y. Liu, “Highly stable and luminescent silica-coated perovskite quantum dots at nanoscale-particle level via nonpolar solvent synthesis,” Chem. Eng. J. 407, 128001 (2021).
[Crossref]

J. Ren, X. Zhou, and Y. Wang, “Dual-emitting CsPbX3@ZJU-28 (X = Cl, Br, I) composites with enhanced stability and unique optical properties for multifunctional applications,” Chem. Eng. J. 391, 123622 (2020).
[Crossref]

M. Lu, J. Guo, S. Sun, P. Lu, X. Zhang, Z. Shi, W. W. Yu, and Y. Zhang, “Surface ligand engineering-assisted CsPbI3 quantum dots enable bright and efficient red light-emitting diodes with a top-emitting structure,” Chem. Eng. J. 404, 126563 (2021).
[Crossref]

X. Xiang, H. Lin, J. Xu, Y. Cheng, C. Wang, L. Zhang, and Y. Wang, “CsPb(Br,I)3 embedded glass: fabrication, tunable luminescence, improved stability and wide-color gamut LCD application,” Chem. Eng. J. 378, 122255 (2019).
[Crossref]

J. Am. Chem. Soc. (1)

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Bertolotti, N. Masciocchi, A. Guagliardi, and M. V. Kovalenko, “Monodisperse formamidinium lead bromide nanocrystals with bright and stable green photoluminescence,” J. Am. Chem. Soc. 138, 14202–14205 (2016).
[Crossref]

J. Eur. Ceram. Soc. (2)

M. Jin, S. Huang, C. Quan, X. Liang, J. Du, Z. Liu, Z. Zhang, and W. Xiang, “Blue low-threshold room-temperature stimulated emission from thermostable perovskite nanocrystals glasses through controlling crystallization,” J. Eur. Ceram. Soc. 41, 1579–1585 (2021).
[Crossref]

Y. Zhang, J. Liu, H. Zhang, Q. He, X. Liang, and W. Xiang, “Ultra-stable Tb3+: CsPbI3 nanocrystal glasses for wide-range high-sensitivity optical temperature sensing,” J. Eur. Ceram. Soc. 40, 6023–6030 (2020).
[Crossref]

J. Phys. Chem. C (1)

C. M. Guvenc, Y. Yalcinkaya, S. Ozen, H. Sahin, and M. M. Demir, “Gd3+-doped α-CsPbI3 nanocrystals with better phase stability and optical properties,” J. Phys. Chem. C 123, 24865–24872 (2019).
[Crossref]

Langmuir (1)

C. Xie, Y. Zhao, W. Shi, and P. Yang, “Postsynthetic surface-treatment of CsPbX3 (X = Cl, Br, or I) nanocrystals via CdX2 precursor solution toward high photoluminescence quantum yield,” Langmuir 37, 1183–1193 (2021).
[Crossref]

Nano Energy (6)

S. Pan, Y. Chen, Z. Wang, Y.-W. Harn, J. Yu, A. Wang, M. J. Smith, Z. Li, V. V. Tsukruk, J. Peng, and Z. Lin, “Strongly-ligated perovskite quantum dots with precisely controlled dimensions and architectures for white light-emitting diodes,” Nano Energy 77, 105043 (2020).
[Crossref]

F. Zhou, Z. Li, H. Chen, Q. Wang, L. Ding, and Z. Jin, “Application of perovskite nanocrystals (NCs)/quantum dots (QDs) in solar cells,” Nano Energy 73, 104757 (2020).
[Crossref]

H. Guan, S. Zhao, H. Wang, D. Yan, M. Wang, and Z. Zang, “Room temperature synthesis of stable single silica-coated CsPbBr3 quantum dots combining tunable red emission of Ag–In–Zn–S for high-CRI white light-emitting diodes,” Nano Energy 67, 104279 (2020).
[Crossref]

B. Tang, Y. Hu, J. Lu, H. Dong, N. Mou, X. Gao, H. Wang, X. Jiang, and L. Zhang, “Energy transfer and wavelength tunable lasing of single perovskite alloy nanowire,” Nano Energy 71, 104641 (2020).
[Crossref]

C. Li, Z. Zang, C. Han, Z. Hu, X. Tang, J. Du, Y. Leng, and K. Sun, “Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing,” Nano Energy 40, 195–202 (2017).
[Crossref]

H. Chen, F. Zhou, and Z. Jin, “Interface engineering, the trump-card for CsPbX3 (X = I, Br) perovskite solar cells development,” Nano Energy 79, 105490 (2021).
[Crossref]

Nano Lett. (2)

S. Wang, J. Yu, M. Zhang, D. Chen, C. Li, R. Chen, G. Jia, A. L. Rogach, and X. Yang, “Stable, strongly emitting cesium lead bromide perovskite nanorods with high optical gain enabled by an intermediate monomer reservoir synthetic strategy,” Nano Lett. 19, 6315–6322 (2019).
[Crossref]

L. Protesescu, S. Yakunin, M. I. Bodnarchuk, F. Krieg, R. Caputo, C. H. Hendon, R. X. Yang, A. Walsh, and M. V. Kovalenko, “Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut,” Nano Lett. 15, 3692–3696 (2015).
[Crossref]

Nanomaterials (1)

V. Neplokh, D. I. Markina, M. Baeva, A. M. Pavlov, D. A. Kirilenko, I. S. Mukhin, A. P. Pushkarev, S. V. Makarov, and A. A. Serdobintsev, “Recrystallization of CsPbBr3 nanoparticles in fluoropolymer nonwoven mats for down- and up-conversion of light,” Nanomaterials 11, 412–421 (2021).
[Crossref]

Nanoscale (2)

Y. Luo, T. Tan, S. Wang, R. Pang, L. Jiang, D. Li, J. Feng, H. Zhang, S. Zhang, and C. Li, “Multivariant ligands stabilize anionic solvent-oriented α-CsPbX3 nanocrystals at room temperature,” Nanoscale 13, 4899–4910 (2021).
[Crossref]

D. Chen, Y. Liu, C. Yang, J. Zhong, S. Zhou, J. Chen, and H. Huang, “Promoting photoluminescence quantum yields of glass-stabilized CsPbX3 (X = Cl, Br, I) perovskite quantum dots through fluorine doping,” Nanoscale 11, 17216–17221 (2019).
[Crossref]

Nat. Commun. (2)

H. Zhang, X. Fu, Y. Tang, H. Wang, C. Zhang, W. W. Yu, X. Wang, Y. Zhang, and M. Xiao, “Phase segregation due to ion migration in all-inorganic mixed-halide perovskite nanocrystals,” Nat. Commun. 10, 1088 (2019).
[Crossref]

S. Li, D. Lei, W. Ren, X. Guo, S. Wu, Y. Zhu, A. L. Rogach, M. Chhowalla, and A. K. Jen, “Water-resistant perovskite nanodots enable robust two-photon lasing in aqueous environment,” Nat. Commun. 11, 1192 (2020).
[Crossref]

Org. Electron. (1)

W. Lin, G. Chen, E. Li, H. Xie, G. Peng, W. Yu, H. Chen, and T. Guo, “Improved stability and performance of all inorganic perovskite quantum dots synthesized directly with N-alkylmonoamine ligands for light-erasable transistor memory,” Org. Electron. 86, 105869 (2020).
[Crossref]

Photon. Res. (3)

Small (1)

D. Yan, T. Shi, Z. Zang, T. Zhou, Z. Liu, Z. Zhang, J. Du, Y. Leng, and X. Tang, “Ultrastable CsPbBr3 perovskite quantum dot and their enhanced amplified spontaneous emission by surface ligand modification,” Small 15, 1901173 (2019).
[Crossref]

Cited By

Optica participates in Crossref's Cited-By Linking service. Citing articles from Optica Publishing Group journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (6)

Fig. 1.
Fig. 1. (a) PL spectra. (b) Spectra plotted as (αhν)2hν of Gd-doped CsPbCl1.5Br1.5 NCs glasses. (c) Photos of a series of Gd-doped CsPbCl1.5Br1.5 NCs glasses (S1–S4) (from left to light) in daylight and ultraviolet (UV) light.
Fig. 2.
Fig. 2. (a) TEM image of Gd-doped CsPbCl1.5Br1.5 NCs glass. (b) HRTEM image of CsPbCl1.5Br1.5 NCs glass (S1). (c) HRTEM image of Gd-doped CsPbCl1.5Br1.5 NCs glass (S3). (d) XRD patterns of Gd-doped CsPbCl1.5Br1.5 NCs glasses. (e)–(j) EDS elemental mappings of Gd-doped CsPbCl1.5Br1.5 NCs glass.
Fig. 3.
Fig. 3. (a) XRD patterns, (b) PL spectra, (c) UV-vis absorption spectra. (d) Spectra plotted as (αhν)2hν of Gd-doped CsPbCl1.5Br1.5 NCs glasses (470°C–530°C).
Fig. 4.
Fig. 4. (a) PL intensity measured during heating, cooling, and reheating. (b) Time-dependent PL intensity. (c) Luminescent photographs of S3 stored in water for different times.
Fig. 5.
Fig. 5. (a), (c), (e), (g) Pump intensity-dependent PL spectra under increasing 800 nm fs pulsed excitation fluence from the Gd-doped CsPbCl1.5Br1.5 NCs glasses (S1–S4). (b), (d), (f), (h) Dependence of the integrated emission intensity (blue lines) and FWHM (red lines) of the emission spectra as a function of pumping density under 800 nm fs laser excitation (S1–S4).
Fig. 6.
Fig. 6. (a)–(c) Pump intensity-dependent PL spectra under increasing 800 nm fs pulsed excitation fluence from the Gd-doped CsPbCl1.5Br1.5 NCs glasses (470°C–530°C). (d)–(f) Dependence of the integrated emission intensity (blue lines) and FWHM (red lines) of the emission spectra as a function of pumping density under 800 nm fs laser excitation (470°C–530°C).

Equations (1)

Equations on this page are rendered with MathJax. Learn more.

(αhν)2=A(hνEg),

Metrics