Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Highly-uniform resonator-based visible spectrometer on a Si3N4 platform with robust and accurate post-fabrication trimming

Abstract

A resonator array-based spectrometer for visible/near-infrared (NIR) wavelengths is fabricated on a low-loss silicon nitride (Si3N4) material platform. Ideally, a spectrometer should uniformly sample the input spectrum. However, resonator-based spectrometers, in which each spectral sample corresponds to resonance wavelength of one of the resonators in the array, suffer from wavelength sampling non-uniformity caused by the high sensitivity of the resonant wavelengths of different resonators to the dimensional variations caused by fabrication imperfections. Using an alignment-insensitive post-fabrication trimming technique, we reduce the standard deviation (STD) of resonance wavelength of a 60-channel integrated photonic spectrometer in Si3N4 to a record-low value of 5 pm in the visible wavelength range. This approach can be used to realize wideband and uniform visible spectrometers that are desirable for applications such as optical signal processing and biological sensing.

© 2018 Optical Society of America

Full Article  |  PDF Article
More Like This
Robust postfabrication trimming of ultracompact resonators on silicon on insulator with relaxed requirements on resolution and alignment

Payam Alipour, Amir H. Atabaki, Murtaza Askari, Ali Adibi, and Ali. A. Eftekhar
Opt. Lett. 40(19) 4476-4479 (2015)

Accurate post-fabrication trimming of ultra-compact resonators on silicon

Amir H. Atabaki, Ali. A. Eftekhar, Murtaza Askari, and Ali Adibi
Opt. Express 21(12) 14139-14145 (2013)

Post-fabrication resonance trimming of Si3N4 photonic circuits via localized thermal annealing of a sputter-deposited SiO2 cladding

Yanran Xie, Henry C. Frankis, Jonathan D. B. Bradley, and Andrew P. Knights
Opt. Mater. Express 11(8) 2401-2412 (2021)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (6)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (1)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.