Abstract

Picosecond, high-intensity 10.6-μm pulses have been used for a time-resolved investigation of nonlinear transmission in InSb. Self-induced shutoff of transmission was observed at 20 K and is attributed to avalanche generation and subsequent strong absorption by intervalence-band transitions. At higher temperatures, generation by two-photon absorption strengthens the effect. The apparent avalanche contribution is not accompanied by laser-induced damage such as occurs in larger-band-gap materials. The change from the transmissive to an opaque state occurs on a picosecond time scale.

© 1980 Optical Society of America

Nonlinear optical parameters for InSb at 10.6 and 9.6 μm with microsecond pulses

A. E. Smith, R. G. McDuff, and N. R. Heckenberg
J. Opt. Soc. Am. B 12(3) 393-400 (1995)

Large nonlinear refraction in InSb at 10 μm and the effects of Auger recombination

V. Dubikovskiy, D. J. Hagan, and E. W. Van Stryland
J. Opt. Soc. Am. B 25(2) 223-235 (2008)

Rough surface interferometry at 10.6 μm

Osuk Kwon, J. C. Wyant, and C. R. Hayslett
Appl. Opt. 19(11) 1862-1869 (1980)

Tunable picosecond infrared pulse generation from a mode-locked FA (II) color-center laser

L. Isganitis, Mark G. Sceats, and K. R. German
Opt. Lett. 5(1) 7-9 (1980)

Nonlinear refraction in CS₂ at 10.6 μm

I. Golub, Y. Beaudoin, and S. L. Chin
Opt. Lett. 13(6) 488-490 (1988)