Abstract
Phase-sensitive optical time-domain reflectometry () is widely used for the distributed detection of mechanical or environmental variations with resolutions of typically a few meters. The spatial resolution of these distributed sensors is related to the temporal width of the input probe pulses. However, the input pulse width cannot be arbitrarily reduced (to improve the resolution), since a minimum pulse energy is required to achieve a good level of signal-to-noise ratio (SNR), and the pulse peak power is limited by the advent of nonlinear effects. In this Letter, inspired by chirped pulse amplification concepts, we present a novel technique that allows us to increase the SNR by several orders of magnitude in -based sensors while reaching spatial resolutions in the centimeter range. In particular, we report an SNR increase of 20 dB over the traditional architecture, which is able to detect strain events with a spatial resolution of 1.8 cm.
© 2017 Optical Society of America
Full Article | PDF ArticleMore Like This
Bin Lu, Zhengqing Pan, Zhaoyong Wang, Hanrong Zheng, Qing Ye, Ronghui Qu, and Haiwen Cai
Opt. Lett. 42(3) 391-394 (2017)
Miguel Soriano-Amat, Hugo F. Martins, Vicente Durán, Sonia Martin-Lopez, Miguel Gonzalez-Herraez, and María R. Fernández-Ruiz
Opt. Lett. 46(17) 4406-4409 (2021)
Xiangge He, Shangran Xie, Fei Liu, Shan Cao, Lijuan Gu, Xiaoping Zheng, and Min Zhang
Opt. Lett. 42(3) 442-445 (2017)