Abstract

A 0.8 to 4.5 μm highly stable all-fiber spliced mid-infrared supercontinuum (SC) source was presented. The joint between the single-mode (SM) pump silica fiber and the ZBLAN fiber (ZrF4BaF2LaF3AlF3NaF, a type of fluoride fiber) was fusion spliced, which greatly improved the SC’s stability. The low-loss splicing was guaranteed by the similar mode field areas of the fundamental mode LP01 of the silica and ZBLAN fibers. At the splicing joint the ZBLAN fiber enveloped the silica fiber, thus increasing the robustness of the splice. A low splicing loss of less than 0.1 dB was calculated, which ensured that the whole SC source was very reliable. The SC had a maximal average power of 550.8 mW with a 1.5 dB spectral bandwidth ranging from 2642 to 4065 nm. In particular, the SC power for λ>3.8  μm was measured to be 116.1 mW with a power ratio of 21.1% of the total SC power. Perfect Gaussian beam profiles of the SC source demonstrated its SM operation. Over 12 h of continuous operation of this SC source showed its outstanding power stability with a root mean square variation of 0.59%, which also demonstrated the high quality of the fusion spliced joint.

© 2016 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Scaling all-fiber mid-infrared supercontinuum up to 10  W-level based on thermal-spliced silica fiber and ZBLAN fiber

Zhijian Zheng, Deqin Ouyang, Junqing Zhao, Minqiu Liu, Shuangchen Ruan, Peiguang Yan, and Jinzhang Wang
Photon. Res. 4(4) 135-139 (2016)

Thirteen watt all-fiber mid-infrared supercontinuum generation in a single mode ZBLAN fiber pumped by a 2  μm MOPA system

Weiqiang Yang, Bin Zhang, Guanghui Xue, Ke Yin, and Jing Hou
Opt. Lett. 39(7) 1849-1852 (2014)

30-W supercontinuum generation based on ZBLAN fiber in an all-fiber configuration

Linyong Yang, Ying Li, Bin Zhang, Tianyi Wu, Yijun Zhao, and Jing Hou
Photon. Res. 7(9) 1061-1065 (2019)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Figures (6)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription

Metrics

You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access OSA Member Subscription