Abstract

A roll-angle interferometer with high sensitivity is presented in this Letter. Two sets of centrosymmetric beams are used to travel through the measurement and reference arms of the roll-angle interferometer, which contains two specific optical devices: wedge prism assembly and wedge mirror assembly. Changes of the optical path in the interferometric arms caused by roll are differential and converted into phase shift through a particular interferometer system. The interferometric beams are a completely common path for the adoption of the centrosymmetric measurement structure, and the cross talk of the straightness, yaw, and pitch errors is avoided. The dead path is minimized, so the stability and the accuracy of the measurement can be greatly enhanced. The experimental results fit well with the theoretical analysis, and a measurement resolution of sub-microradian is achieved experimentally.

© 2013 Optical Society of America

Measurement of straightness without Abbe error using an enhanced differential plane mirror interferometer

Tao Jin, Hudong Ji, Wenmei Hou, Yanfen Le, and Lu Shen
Appl. Opt. 56(3) 607-610 (2017)

Resolution-enhanced heterodyne laser interferometer with differential configuration for roll angle measurement

Jingya Qi, Zhao Wang, Junhui Huang, and Jianmin Gao
Opt. Express 26(8) 9634-9644 (2018)

Heterodyne interferometer with two parallel-polarized input beams for high-resolution roll angle measurement

Jingya Qi, Zhao Wang, Junhui Huang, Qing Wang, and Jianmin Gao
Opt. Express 27(10) 13820-13830 (2019)

Roll angle measurement system based on differential plane mirror interferometer

Kai Shi, Junhong Su, and Wenmei Hou
Opt. Express 26(16) 19826-19834 (2018)

Compact optical roll-angle sensor with large measurement range and high sensitivity

Shiguang Li, Changxi Yang, Enyao Zhang, and Guofan Jin
Opt. Lett. 30(3) 242-244 (2005)