Abstract

The viability and performance of using a silicon photomultiplier (SiPM) in atmospheric lidar applications is experimentally compared against the well-established use of photomultiplier tubes. By using a modified lidar setup for simultaneous data acquisition of both types of sensors, we demonstrate that a SiPM can offer appropriate qualities for this specific application where the detection of fast, extremely low light pulses and large dynamic range signals are essential capabilities. The experimental results show that the SiPM has an appropriate behaviour offering suitable capabilities for elastic, backscatter aerosol lidars. To the best of our knowledge, this is the first study showing SiPM for atmospheric lidar applications.

©2012 Optical Society of America

Diffractive/refractive (hybrid) UV-imaging system for minimally invasive metrology: design, performance, and application experiments

René Reichle, Christof Pruss, Christopher Gessenhardt, Christof Schulz, and Wolfgang Osten
Appl. Opt. 51(12) 1982-1996 (2012)

Quantitative phase microscopy using dual-plane in-line digital holography

Bhargab Das, Chandra S. Yelleswarapu, and D. V. G. L. N. Rao
Appl. Opt. 51(9) 1387-1395 (2012)

Dimensionless parameterization of lidar for laser remote sensing of the atmosphere and its application to systems with SiPM and PMT detectors

Ravil Agishev, Adolfo Comerón, Alejandro Rodriguez, and Michaël Sicard
Appl. Opt. 53(15) 3164-3175 (2014)

Si-based tunable flattop photodetector with a stepped Fabry–Perot cavity

Wei Wang, Yongqing Huang, Xiaofeng Duan, Jia Tian, Jingwei Guo, and Xiaomin Ren
Appl. Opt. 51(10) 1487-1494 (2012)

Low-threshold plasmonic lasing based on high-Q dipole void mode in a metallic nanoshell

J. Pan, Z. Chen, J. Chen, P. Zhan, C. J. Tang, and Z. L. Wang
Opt. Lett. 37(7) 1181-1183 (2012)