Abstract

We demonstrated a tunable molding process to fabricate aspherical polymer lenses that can reduce aberrations and the total length of an optical system. Radius of curvature and conic constant are shown to be the key parameters to characterize the lens profile. The good agreement between the measured profiles and the simulated profiles allows us to design and fabricate lenses of a wide range of user-specified properties. Compared to the conventional aspherical lens fabrication method using injection molding with a diamond-turned mold, the proposed method may yield savings in time and cost.

© 2009 Optical Society of America

Fabrication of aspherical polymeric lenses using tunable ferrogel molds

Mojtaba Falahati, Yu-Chung Chang, Parvaneh Ahmadvand, Wenchen Zhou, Allen Yi, and Lei Li
Appl. Opt. 59(8) 2632-2640 (2020)

Tunable liquid-filled lens integrated with aspherical surface for spherical aberration compensation

Hongbin Yu, Guangya Zhou, Hui Min Leung, and Fook Siong Chau
Opt. Express 18(10) 9945-9954 (2010)

Fabrication process for small aspherical lenses

Angelina Müller, Matthias C. Wapler, Binal P. Bruno, and Ulrike Wallrabe
Opt. Lett. 45(2) 587-590 (2020)

Fabrication and characterization of PDMS microlenses based on elastomeric molding technology

Hongbin Yu, Guangya Zhou, Fook Siong Chau, and Feiwen Lee
Opt. Lett. 34(21) 3454-3456 (2009)

Liquid tunable double-focus lens fabricated with diamond cutting and soft lithography

Hui Min Leung, Guangya Zhou, Hongbin Yu, Fook Siong Chau, and A. Senthil Kumar
Appl. Opt. 48(30) 5733-5740 (2009)