Abstract

The photomechanical model of laser ablation of biological tissue asserts that ablation is initiated when the laser-induced tensile stress exceeds the ultimate tensile strength of the target. We show that, unlike the one-dimensional thermoelastic model of laser-induced stress generation that has appeared in the literature, the full three-dimensional solution predicts the development of significant tensile stresses on the surface of the target, precisely where ablation is observed to occur. An interferometric technique has been developed to measure the time-dependent thermoelastic expansion, and the results for subthreshold laser fluences are in precise agreement with the predictions of the three-dimensional model.

© 1994 Optical Society of America

Ultrashort single-pulse laser ablation of stainless steel, aluminium, copper and its dependence on the pulse duration

Jan Winter, Maximilian Spellauge, Jens Hermann, Constanze Eulenkamp, Heinz P. Huber, and Michael Schmidt
Opt. Express 29(10) 14561-14581 (2021)

Tissue tearing caused by pulsed laser-induced ablation pressure

Joseph P. Cummings and Joseph T. Walsh
Appl. Opt. 32(4) 494-503 (1993)

Comparison of ablation mechanisms at low fluence for ultrashort and short-pulse laser exposure of very thin molybdenum films on glass

Pinaki Das Gupta and Gerard M. O’Connor
Appl. Opt. 55(9) 2117-2125 (2016)

Laser selective cutting of biological tissues by impulsive heat deposition through ultrafast vibrational excitations

Kresimir Franjic, Michael L. Cowan, Darren Kraemer, and R. J. Dwayne Miller
Opt. Express 17(25) 22937-22959 (2009)

Vacuum-cored hollow waveguide for transmission of high-energy, nanosecond Nd:YAG laser pulses and its application to biological tissue ablation

Shunichi Sato, Hiroshi Ashida, Tsunenori Arai, Yi-Wei Shi, Yuji Matsuura, and Mitsunobu Miyagi
Opt. Lett. 25(1) 49-51 (2000)