W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

R. Wu, P. Benítez, Y. Zhang, and J. C. Miñano, “Influence of the characteristics of a light source and target on the Monge-Ampère equation method in freeform optics design,” Opt. Lett. 39(3), 634 (2014).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

P. Benítez, “Simultaneous multiple surface optical design method in three dimensions,” Opt. Eng. 43(7), 1489 (2004).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation problem in the design of freeform optical elements generating far-field irradiance distributions for plane incident beam,” Appl. Opt. 58(33), 9131 (2019).

[Crossref]

L. L. Doskolovich, D. A. Bykov, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation and linear assignment problems in the design of freeform refractive optical elements generating far-field irradiance distributions,” Opt. Express 27(9), 13083 (2019).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation problem in the design of freeform optical elements generating far-field irradiance distributions for plane incident beam,” Appl. Opt. 58(33), 9131 (2019).

[Crossref]

L. L. Doskolovich, D. A. Bykov, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation and linear assignment problems in the design of freeform refractive optical elements generating far-field irradiance distributions,” Opt. Express 27(9), 13083 (2019).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

D. F. Crouse, “On implementing 2D rectangular assignment algorithms,” IEEE Trans. Aerosp. Electron. Syst. 52(4), 1679–1696 (2016).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation problem in the design of freeform optical elements generating far-field irradiance distributions for plane incident beam,” Appl. Opt. 58(33), 9131 (2019).

[Crossref]

L. L. Doskolovich, D. A. Bykov, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation and linear assignment problems in the design of freeform refractive optical elements generating far-field irradiance distributions,” Opt. Express 27(9), 13083 (2019).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

L. L. Doskolovich, K. V. Borisova, M. A. Moiseev, and N. L. Kazanskiy, “Design of mirrors for generating prescribed continuous illuminance distributions on the basis of the supporting quadric method,” Appl. Opt. 55(4), 687 (2016).

[Crossref]

S. Sorgato, J. Chaves, H. Thienpont, and F. Duerr, “Design of illumination optics with extended sources based on wavefront tailoring,” Optica 6(8), 966 (2019).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

D. M. Schut, C. G. Dupuy, and J. P. Harmon, “Inks for 3D printing gradient refractive index (GRIN) optical components,” US 9,447,299 (2016).

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

Z. Feng, B. D. Froese, and R. Liang, “Freeform illumination optics construction following an optimal transport map,” Appl. Opt. 55(16), 4301 (2016).

[Crossref]

D. M. Schut, C. G. Dupuy, and J. P. Harmon, “Inks for 3D printing gradient refractive index (GRIN) optical components,” US 9,447,299 (2016).

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

A. Timinger, J. Unterhinninghofen, S. Junginger, and A. Hofmann, “Tolerancing free-form optics for illumination,” Proc. SPIE 8170, 817006 (2011).

[Crossref]

J. ten Thije Boonkkamp, C. Prins, W. IJzerman, and T. Tukker, “The Monge-Ampère Equation for Freeform Optics,” in Imaging and Applied Optics 2015, (OSA, 2015), p. FTh3B.4.

A. Timinger, J. Unterhinninghofen, S. Junginger, and A. Hofmann, “Tolerancing free-form optics for illumination,” Proc. SPIE 8170, 817006 (2011).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

L. L. Doskolovich, K. V. Borisova, M. A. Moiseev, and N. L. Kazanskiy, “Design of mirrors for generating prescribed continuous illuminance distributions on the basis of the supporting quadric method,” Appl. Opt. 55(4), 687 (2016).

[Crossref]

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

H. W. Kuhn, “The Hungarian method for the assignment problem,” Nav. Res. Logist. Q. 2(1-2), 83–97 (1955).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

Z. Feng, B. D. Froese, and R. Liang, “Freeform illumination optics construction following an optimal transport map,” Appl. Opt. 55(16), 4301 (2016).

[Crossref]

R. Wester, G. Müller, A. Völl, M. Berens, J. Stollenwerk, and P. Loosen, “Designing optical free-form surfaces for extended sources,” Opt. Express 22(S2), A552 (2014).

[Crossref]

A. Bäuerle, A. Bruneton, R. Wester, J. Stollenwerk, and P. Loosen, “Algorithm for irradiance tailoring using multiple freeform optical surfaces,” Opt. Express 20(13), 14477 (2012).

[Crossref]

E. W. Marchand, Gradient Index Optics (Academic Press, 1978).

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

R. Wu, P. Benítez, Y. Zhang, and J. C. Miñano, “Influence of the characteristics of a light source and target on the Monge-Ampère equation method in freeform optics design,” Opt. Lett. 39(3), 634 (2014).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation problem in the design of freeform optical elements generating far-field irradiance distributions for plane incident beam,” Appl. Opt. 58(33), 9131 (2019).

[Crossref]

L. L. Doskolovich, D. A. Bykov, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation and linear assignment problems in the design of freeform refractive optical elements generating far-field irradiance distributions,” Opt. Express 27(9), 13083 (2019).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

T. Yang, N. Takaki, J. Bentley, G. Schmidt, and D. T. Moore, “Efficient representation of freeform gradient-index profiles for non-rotationally symmetric optical design,” Opt. Express 28(10), 14788 (2020).

[Crossref]

D. T. Moore, “Ray tracing in gradient-index media,” J. Opt. Soc. Am. 65(4), 451 (1975).

[Crossref]

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

J. ten Thije Boonkkamp, C. Prins, W. IJzerman, and T. Tukker, “The Monge-Ampère Equation for Freeform Optics,” in Imaging and Applied Optics 2015, (OSA, 2015), p. FTh3B.4.

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

H. Ries and J. Muschaweck, “Tailored freeform optical surfaces,” J. Opt. Soc. Am. A 19(3), 590–595 (2002).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

D. M. Schut, C. G. Dupuy, and J. P. Harmon, “Inks for 3D printing gradient refractive index (GRIN) optical components,” US 9,447,299 (2016).

R. Wester, G. Müller, A. Völl, M. Berens, J. Stollenwerk, and P. Loosen, “Designing optical free-form surfaces for extended sources,” Opt. Express 22(S2), A552 (2014).

[Crossref]

A. Bäuerle, A. Bruneton, R. Wester, J. Stollenwerk, and P. Loosen, “Algorithm for irradiance tailoring using multiple freeform optical surfaces,” Opt. Express 20(13), 14477 (2012).

[Crossref]

J. ten Thije Boonkkamp, C. Prins, W. IJzerman, and T. Tukker, “The Monge-Ampère Equation for Freeform Optics,” in Imaging and Applied Optics 2015, (OSA, 2015), p. FTh3B.4.

A. Timinger, J. Unterhinninghofen, S. Junginger, and A. Hofmann, “Tolerancing free-form optics for illumination,” Proc. SPIE 8170, 817006 (2011).

[Crossref]

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

J. ten Thije Boonkkamp, C. Prins, W. IJzerman, and T. Tukker, “The Monge-Ampère Equation for Freeform Optics,” in Imaging and Applied Optics 2015, (OSA, 2015), p. FTh3B.4.

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

A. Timinger, J. Unterhinninghofen, S. Junginger, and A. Hofmann, “Tolerancing free-form optics for illumination,” Proc. SPIE 8170, 817006 (2011).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

R. Wester, G. Müller, A. Völl, M. Berens, J. Stollenwerk, and P. Loosen, “Designing optical free-form surfaces for extended sources,” Opt. Express 22(S2), A552 (2014).

[Crossref]

A. Bäuerle, A. Bruneton, R. Wester, J. Stollenwerk, and P. Loosen, “Algorithm for irradiance tailoring using multiple freeform optical surfaces,” Opt. Express 20(13), 14477 (2012).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

R. Wu, P. Benítez, Y. Zhang, and J. C. Miñano, “Influence of the characteristics of a light source and target on the Monge-Ampère equation method in freeform optics design,” Opt. Lett. 39(3), 634 (2014).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

R. Wu, L. Xu, P. Liu, Y. Zhang, Z. Zheng, H. Li, and X. Liu, “Freeform illumination design: a nonlinear boundary problem for the elliptic Monge-Ampère equation,” Opt. Lett. 38(2), 229 (2013).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

R. Wu, P. Benítez, Y. Zhang, and J. C. Miñano, “Influence of the characteristics of a light source and target on the Monge-Ampère equation method in freeform optics design,” Opt. Lett. 39(3), 634 (2014).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

R. Wu, L. Xu, P. Liu, Y. Zhang, Z. Zheng, H. Li, and X. Liu, “Freeform illumination design: a nonlinear boundary problem for the elliptic Monge-Ampère equation,” Opt. Lett. 38(2), 229 (2013).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

R. Wu, L. Xu, P. Liu, Y. Zhang, Z. Zheng, H. Li, and X. Liu, “Freeform illumination design: a nonlinear boundary problem for the elliptic Monge-Ampère equation,” Opt. Lett. 38(2), 229 (2013).

[Crossref]

Z. Feng, B. D. Froese, and R. Liang, “Freeform illumination optics construction following an optimal transport map,” Appl. Opt. 55(16), 4301 (2016).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation problem in the design of freeform optical elements generating far-field irradiance distributions for plane incident beam,” Appl. Opt. 58(33), 9131 (2019).

[Crossref]

L. L. Doskolovich, K. V. Borisova, M. A. Moiseev, and N. L. Kazanskiy, “Design of mirrors for generating prescribed continuous illuminance distributions on the basis of the supporting quadric method,” Appl. Opt. 55(4), 687 (2016).

[Crossref]

C. Bösel and H. Gross, “Compact freeform illumination system design for pattern generation with extended light sources,” Appl. Opt. 58(10), 2713 (2019).

[Crossref]

A. Sharma, D. V. Kumar, and A. K. Ghatak, “Tracing rays through graded-index media: a new method,” Appl. Opt. 21(6), 984 (1982).

[Crossref]

D. F. Crouse, “On implementing 2D rectangular assignment algorithms,” IEEE Trans. Aerosp. Electron. Syst. 52(4), 1679–1696 (2016).

[Crossref]

H. Ries and J. Muschaweck, “Tailored freeform optical surfaces,” J. Opt. Soc. Am. A 19(3), 590–595 (2002).

[Crossref]

K. Brix, Y. Hafizogullari, and A. Platen, “Designing illumination lenses and mirrors by the numerical solution of Monge-Ampère equations,” J. Opt. Soc. Am. A 32(11), 2227 (2015).

[Crossref]

C. Bösel and H. Gross, “Single freeform surface design for prescribed input wavefront and target irradiance,” J. Opt. Soc. Am. A 34(9), 1490 (2017).

[Crossref]

L. B. Romijn, J. H. M. ten Thije Boonkkamp, and W. L. IJzerman, “Freeform lens design for a point source and far-field target,” J. Opt. Soc. Am. A 36(11), 1926 (2019).

[Crossref]

R. Wu, Z. Feng, Z. Zheng, R. Liang, P. Benítez, J. C. Mi nano, and F. Duerr, “Design of Freeform Illumination Optics,” Laser Photonics Rev. 12(7), 1700310 (2018).

[Crossref]

H. W. Kuhn, “The Hungarian method for the assignment problem,” Nav. Res. Logist. Q. 2(1-2), 83–97 (1955).

[Crossref]

P. Benítez, “Simultaneous multiple surface optical design method in three dimensions,” Opt. Eng. 43(7), 1489 (2004).

[Crossref]

T. Yang, N. Takaki, J. Bentley, G. Schmidt, and D. T. Moore, “Efficient representation of freeform gradient-index profiles for non-rotationally symmetric optical design,” Opt. Express 28(10), 14788 (2020).

[Crossref]

W. M. Kunkel and J. R. Leger, “Gradient-index design for mode conversion of diffracting beams,” Opt. Express 24(12), 13480 (2016).

[Crossref]

R. Wester, G. Müller, A. Völl, M. Berens, J. Stollenwerk, and P. Loosen, “Designing optical free-form surfaces for extended sources,” Opt. Express 22(S2), A552 (2014).

[Crossref]

V. Oliker, “Controlling light with freeform multifocal lens designed with supporting quadric method (SQM),” Opt. Express 25(4), A58 (2017).

[Crossref]

A. Bäuerle, A. Bruneton, R. Wester, J. Stollenwerk, and P. Loosen, “Algorithm for irradiance tailoring using multiple freeform optical surfaces,” Opt. Express 20(13), 14477 (2012).

[Crossref]

R. Wu, Y. Zhang, M. M. Sulman, Z. Zheng, P. Benítez, and J. C. Miñano, “Initial design with L2 Monge-Kantorovich theory for the Monge-Ampère equation method in freeform surface illumination design,” Opt. Express 22(13), 16161 (2014).

[Crossref]

C. Bösel and H. Gross, “Ray mapping approach for the efficient design of continuous freeform surfaces,” Opt. Express 24(13), 14271 (2016).

[Crossref]

D. A. Bykov, L. L. Doskolovich, A. A. Mingazov, E. A. Bezus, and N. L. Kazanskiy, “Linear assignment problem in the design of freeform refractive optical elements generating prescribed irradiance distributions,” Opt. Express 26(21), 27812 (2018).

[Crossref]

L. L. Doskolovich, D. A. Bykov, A. A. Mingazov, and E. A. Bezus, “Optimal mass transportation and linear assignment problems in the design of freeform refractive optical elements generating far-field irradiance distributions,” Opt. Express 27(9), 13083 (2019).

[Crossref]

K. Desnijder, W. Ryckaert, P. Hanselaer, and Y. Meuret, “Luminance spreading freeform lens arrays with accurate intensity control,” Opt. Express 27(23), 32994 (2019).

[Crossref]

R. Wu, L. Xu, P. Liu, Y. Zhang, Z. Zheng, H. Li, and X. Liu, “Freeform illumination design: a nonlinear boundary problem for the elliptic Monge-Ampère equation,” Opt. Lett. 38(2), 229 (2013).

[Crossref]

R. Wu, P. Benítez, Y. Zhang, and J. C. Miñano, “Influence of the characteristics of a light source and target on the Monge-Ampère equation method in freeform optics design,” Opt. Lett. 39(3), 634 (2014).

[Crossref]

D. Michaelis, P. Schreiber, and A. Bräuer, “Cartesian oval representation of freeform optics in illumination systems,” Opt. Lett. 36(6), 918 (2011).

[Crossref]

B. G. Assefa, T. Saastamoinen, M. Pekkarinen, V. Nissinen, J. Biskop, M. Kuittinen, J. Turunen, and J. Saarinen, “Realizing freeform lenses using an optics 3D-printer for industrial based tailored irradiance distribution,” OSA Continuum 2(3), 690 (2019).

[Crossref]

W. Pohl, C. Anselm, C. Knoflach, A. L. Timinger, J. A. Muschaweck, and H. Ries, “Complex 3D-tailored facets for optimal lighting of facades and public places,” Proc. SPIE 5186, 133–142 (2003).

[Crossref]

V. Oliker, “Freeform optical systems with prescribed irradiance properties in near-field,” Proc. SPIE 6342, 634211 (2006).

[Crossref]

A. Timinger, J. Unterhinninghofen, S. Junginger, and A. Hofmann, “Tolerancing free-form optics for illumination,” Proc. SPIE 8170, 817006 (2011).

[Crossref]

M. Li, D. Li, C. Zhang, K. E Z. Hong, and C. Li, “Improved zonal wavefront reconstruction algorithm for Hartmann type test with arbitrary grid patterns,” Proc. SPIE 9623, 962319 (2015).

[Crossref]

S. D. Campbell, D. E. Brocker, D. H. Werner, C. Dupuy, S.-K. Park, and P. Harmon, “Three-dimensional gradient-index optics via injketaided additive manufacturing techniques,” in 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, (IEEE, 2015), pp. 605–606.

D. M. Schut, C. G. Dupuy, and J. P. Harmon, “Inks for 3D printing gradient refractive index (GRIN) optical components,” US 9,447,299 (2016).

E. W. Marchand, Gradient Index Optics (Academic Press, 1978).

J. ten Thije Boonkkamp, C. Prins, W. IJzerman, and T. Tukker, “The Monge-Ampère Equation for Freeform Optics,” in Imaging and Applied Optics 2015, (OSA, 2015), p. FTh3B.4.