Abstract

We offer to use optical features of surface plasmon resonance in Ag nanoparticles for jewelry application as a method for the well-controlled decoration of silver items. The novel approach of silver nanoparticles formation with sizes from 5 to 50 nm via nanosecond direct laser writing allows for controlling the reflectance spectra, thus creating a color image on precious metals with a high resolution of about 450 dpi without dyes or hazardous chemicals. Moreover, the large-scale color image can be applied in single-step processing with significant productivity of 2 cm2 per minute. This work opens a strong direction for the practical application in the jewelry industry, art, and coining.

© 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Laser coloration of metals in visual art and design

Ya. M. Andreeva, V. C. Luong, D. S. Lutoshina, O. S. Medvedev, V. Yu. Mikhailovskii, M. K. Moskvin, G. V. Odintsova, V. V. Romanov, N. N. Shchedrina, and V. P. Veiko
Opt. Mater. Express 9(3) 1310-1319 (2019)

Controlled oxide films formation by nanosecond laser pulses for color marking

Vadim Veiko, Galina Odintsova, Eduard Ageev, Yulia Karlagina, Anatoliy Loginov, Alexandra Skuratova, and Elena Gorbunova
Opt. Express 22(20) 24342-24347 (2014)

Laser-induced color printing on semicontinuous silver films: red, green and blue

Piotr Nyga, Sarah N. Chowdhury, Zhaxylyk Kudyshev, Mark D. Thoreson, Alexander V. Kildishev, Vladimir M. Shalaev, and Alexandra Boltasseva
Opt. Mater. Express 9(3) 1528-1538 (2019)

References

  • View by:
  • |
  • |
  • |

  1. D. Duprez and F. Cavani, Handbook of Advanced Methods and processes in oxidation catalysis: from laboratory to industry (World Scientific, 2014).
  2. L. Bartlett, “An unusual phenomenon observed when anodising CP titanium to produce coloured surfaces for jewellery and other decorative uses,” Opt. Laser Technol. 38(4–6), 440–444 (2006).
    [Crossref]
  3. “Insoluble anodes for precious metal plating,” Met. Finish. 93(9), 94 (1995).
    [Crossref]
  4. J. Werge-Hartley, Enamelling on precious metals (Crowood Press, Limited, 2010).
  5. O. Untracht, Jewelry Concepts & Technology (Doubleday, 2011).
  6. R. Hughes and M. Rowe, The coloring, bronzing and patination of metals (2000).
  7. V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
    [Crossref]
  8. F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
    [Crossref]
  9. E. Akman and E. Cerkezoglu, “Compositional and micro-scratch analyses of laser induced colored surface of titanium,” Opt. Lasers Eng. 84, 37–43 (2016).
    [Crossref]
  10. E. I. Ageev, V. P. Veiko, E. A. Vlasova, Y. Y. Karlagina, A. Krivonosov, M. K. Moskvin, G. V. Odintsova, V. E. Pshenichnov, V. V. Romanov, and R. M. Yatsuk, “Controlled nanostructures formation on stainless steel by short laser pulses for products protection against falsification,” Opt. Express 26(2), 2117–2122 (2018).
    [Crossref] [PubMed]
  11. G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
    [Crossref]
  12. A. Y. Vorobyev and C. Guo, “Colorizing metals with femtosecond laser pulses,” Appl. Phys. Lett. 92(4), 041914 (2008).
    [Crossref]
  13. B. Dusser, Z. Sagan, H. Soder, N. Faure, J. P. Colombier, M. Jourlin, and E. Audouard, “Controlled nanostructrures formation by ultra fast laser pulses for color marking,” Opt. Express 18(3), 2913–2924 (2010).
  14. V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
    [Crossref]
  15. P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
    [Crossref] [PubMed]
  16. A. Y. Vorobyev, V. S. Makin, and C. Guo, “Optical properties of femtosecond laser-induced periodic surface structures on metals,” in 2009 52nd IEEE International Midwest Symposium on Circuits and SystemsIEEE, 2009), pp. 909–912.
    [Crossref]
  17. Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
    [Crossref] [PubMed]
  18. J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
    [Crossref] [PubMed]
  19. Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
    [Crossref] [PubMed]
  20. L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
    [Crossref] [PubMed]
  21. J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
    [Crossref]
  22. F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
    [Crossref] [PubMed]
  23. R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
    [Crossref] [PubMed]
  24. J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
    [Crossref] [PubMed]
  25. N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
    [Crossref] [PubMed]
  26. X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
    [Crossref] [PubMed]
  27. K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
    [Crossref] [PubMed]
  28. S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
    [Crossref] [PubMed]
  29. A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
    [Crossref] [PubMed]
  30. A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
    [Crossref] [PubMed]
  31. Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
    [Crossref] [PubMed]
  32. F. Cheng, J. Gao, L. Stan, D. Rosenmann, D. Czaplewski, and X. Yang, “Aluminum plasmonic metamaterials for structural color printing,” Opt. Express 23(11), 14552–14560 (2015).
    [Crossref] [PubMed]
  33. L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
    [Crossref] [PubMed]
  34. M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
    [Crossref]
  35. X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
    [Crossref] [PubMed]
  36. F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
    [Crossref]
  37. R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
    [Crossref]
  38. S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
    [Crossref]
  39. C.-H. Chou and F.-C. Chen, “Plasmonic nanostructures for light trapping in organic photovoltaic devices,” Nanoscale 6(15), 8444–8458 (2014).
    [Crossref] [PubMed]
  40. J. Sancho-Parramon, “Surface plasmon resonance broadening of metallic particles in the quasi-static approximation: a numerical study of size confinement and interparticle interaction effects,” Nanotechnology 20(23), 235706 (2009).
    [Crossref] [PubMed]
  41. W. Theiß, “The use of effective medium theories in optical spectroscopy,” in R. Helbig (eds) Advances in Solid State Physics 33, 149–176 (Springer, 1994).
  42. A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
    [Crossref]
  43. U. Kreibig and M. Vollmer, Optical properties of metal clusters Springer series in materials science (Springer, 1995).
  44. I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).
  45. J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
    [Crossref]
  46. J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
    [Crossref]
  47. S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
    [Crossref]
  48. B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).
  49. N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
    [Crossref]
  50. C. Ma and J. M. Harris, “Surface-enhanced Raman scattering study of the kinetics of self-assembly of carboxylate-terminated n-alkanethiols on silver,” Langmuir 28(5), 2628–2636 (2012).
    [Crossref] [PubMed]
  51. D. W. Mayo, F. A. Miller, and R. W. Hannah, Course notes on the interpretation of infrared and Raman spectra (John Wiley & Sons, 2004).

2018 (5)

E. I. Ageev, V. P. Veiko, E. A. Vlasova, Y. Y. Karlagina, A. Krivonosov, M. K. Moskvin, G. V. Odintsova, V. E. Pshenichnov, V. V. Romanov, and R. M. Yatsuk, “Controlled nanostructures formation on stainless steel by short laser pulses for products protection against falsification,” Opt. Express 26(2), 2117–2122 (2018).
[Crossref] [PubMed]

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
[Crossref] [PubMed]

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

2017 (6)

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
[Crossref] [PubMed]

F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
[Crossref]

2016 (7)

E. Akman and E. Cerkezoglu, “Compositional and micro-scratch analyses of laser induced colored surface of titanium,” Opt. Lasers Eng. 84, 37–43 (2016).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

2015 (5)

F. Cheng, J. Gao, L. Stan, D. Rosenmann, D. Czaplewski, and X. Yang, “Aluminum plasmonic metamaterials for structural color printing,” Opt. Express 23(11), 14552–14560 (2015).
[Crossref] [PubMed]

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

2014 (5)

A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
[Crossref]

C.-H. Chou and F.-C. Chen, “Plasmonic nanostructures for light trapping in organic photovoltaic devices,” Nanoscale 6(15), 8444–8458 (2014).
[Crossref] [PubMed]

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

2012 (2)

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

C. Ma and J. M. Harris, “Surface-enhanced Raman scattering study of the kinetics of self-assembly of carboxylate-terminated n-alkanethiols on silver,” Langmuir 28(5), 2628–2636 (2012).
[Crossref] [PubMed]

2010 (2)

2009 (2)

P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
[Crossref] [PubMed]

J. Sancho-Parramon, “Surface plasmon resonance broadening of metallic particles in the quasi-static approximation: a numerical study of size confinement and interparticle interaction effects,” Nanotechnology 20(23), 235706 (2009).
[Crossref] [PubMed]

2008 (1)

A. Y. Vorobyev and C. Guo, “Colorizing metals with femtosecond laser pulses,” Appl. Phys. Lett. 92(4), 041914 (2008).
[Crossref]

2007 (2)

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

2006 (1)

L. Bartlett, “An unusual phenomenon observed when anodising CP titanium to produce coloured surfaces for jewellery and other decorative uses,” Opt. Laser Technol. 38(4–6), 440–444 (2006).
[Crossref]

2005 (1)

B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).

2004 (1)

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

2002 (1)

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

1995 (1)

“Insoluble anodes for precious metal plating,” Met. Finish. 93(9), 94 (1995).
[Crossref]

1987 (1)

S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
[Crossref]

Abbasi-Moayed, S.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Acosta, L.

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

Ageev, E.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Ageev, E. I.

Akman, E.

E. Akman and E. Cerkezoglu, “Compositional and micro-scratch analyses of laser induced colored surface of titanium,” Opt. Lasers Eng. 84, 37–43 (2016).
[Crossref]

Albrektsen, O.

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

Amara, E. H.

F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
[Crossref]

Andreeva, Y.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Arenas, J. F.

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

Atanasov, P. A.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Audouard, E.

Barbic, M.

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

Barnard, E. S.

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Bartlett, L.

L. Bartlett, “An unusual phenomenon observed when anodising CP titanium to produce coloured surfaces for jewellery and other decorative uses,” Opt. Laser Technol. 38(4–6), 440–444 (2006).
[Crossref]

Bedu, F.

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Bellas, D. V.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Belov, P. A.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Berini, P.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Bigdeli, A.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Biswas, N.

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

Bonod, N.

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Boutinguiza, M.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Bowen, L.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Bozhevolnyi, S. I.

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

Brihmat-Hamadi, F.

F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
[Crossref]

Brongersma, M. L.

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Brown, A. M.

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Bukowska, J.

B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).

Calà Lesina, A.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Cao, L.

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Casari, D.

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

Castro, J. L.

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

Ceballos, M.

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

Cerkezoglu, E.

E. Akman and E. Cerkezoglu, “Compositional and micro-scratch analyses of laser induced colored surface of titanium,” Opt. Lasers Eng. 84, 37–43 (2016).
[Crossref]

Charron, M.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Chen, F.-C.

C.-H. Chou and F.-C. Chen, “Plasmonic nanostructures for light trapping in organic photovoltaic devices,” Nanoscale 6(15), 8444–8458 (2014).
[Crossref] [PubMed]

Chen, R.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Cheng, F.

Chon, J. W. M.

P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
[Crossref] [PubMed]

Chou, C.-H.

C.-H. Chou and F.-C. Chen, “Plasmonic nanostructures for light trapping in organic photovoltaic devices,” Nanoscale 6(15), 8444–8458 (2014).
[Crossref] [PubMed]

Chu, J.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Colombier, J. P.

Comesaña, R.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Côté, G.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Cranton, W. M.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Cui, Y.

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

Czaplewski, D.

Davis, A.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Del Val, J.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Dong, Z.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Duan, H.

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Duempelmann, L.

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

Dusser, B.

Fahimi-Kashani, N.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Fan, P.

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Faure, N.

Fu, Y. H.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Gallas, B.

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Gallinet, B.

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

Gao, J.

Garcia, H.

A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
[Crossref]

Ghasemi, F.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Goh, X. M.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Golmohammadi, H.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Gómez, I.

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

Gorbunova, E.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Grochowska, K.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Gu, M.

P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
[Crossref] [PubMed]

Guay, J.-M.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Guo, C.

A. Y. Vorobyev and C. Guo, “Colorizing metals with femtosecond laser pulses,” Appl. Phys. Lett. 92(4), 041914 (2008).
[Crossref]

A. Y. Vorobyev, V. S. Makin, and C. Guo, “Optical properties of femtosecond laser-induced periodic surface structures on metals,” in 2009 52nd IEEE International Midwest Symposium on Circuits and SystemsIEEE, 2009), pp. 909–912.
[Crossref]

Harris, J. M.

C. Ma and J. M. Harris, “Surface-enhanced Raman scattering study of the kinetics of self-assembly of carboxylate-terminated n-alkanethiols on silver,” Langmuir 28(5), 2628–2636 (2012).
[Crossref] [PubMed]

Hegde, R. S.

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Hernández, G.

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

Hirsch, D.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Ho, J.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Højlund-Nielsen, E.

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

Hormozi-Nezhad, M. R.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Hu, Y.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Huang, W.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Huang, Y.

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

Huang, Z.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Hughes, R.

R. Hughes and M. Rowe, The coloring, bronzing and patination of metals (2000).

Jafarinejad, S.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Jourlin, M.

Juodkazis, S.

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

Kalfagiannis, N.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Kalyanaraman, R.

A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
[Crossref]

Kapoor, S.

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

Karlagina, Y.

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Karlagina, Y. Y.

Kellou, H.

F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
[Crossref]

Kim, M. S.

S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
[Crossref]

Kim, S. K.

S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
[Crossref]

Koh, S. C. W.

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Kosmidis, C.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Koutsogeorgis, D. C.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Krasnok, A. E.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Kristensen, A.

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

Krivonosov, A.

Kuchmizhak, A.

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

Kudelski, A.

B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).

Kumar, K.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Kuznetsov, A. I.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Lai, F.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Lai, N. D.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Ledoux-Rak, I.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Lee, H. K.

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

Li, G.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Li, J.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Li, X.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Lidorikis, E.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Lin, L.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Lin, Y.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Ling, X. Y.

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

López, I. A.

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

López-Ramirez, M. R.

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

Luong, M. H.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Lusquiños, F.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Luu-Dinh, A.

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

Lv, J.

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Ma, C.

C. Ma and J. M. Harris, “Surface-enhanced Raman scattering study of the kinetics of self-assembly of carboxylate-terminated n-alkanethiols on silver,” Langmuir 28(5), 2628–2636 (2012).
[Crossref] [PubMed]

Mahal, H. S.

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

Makarov, S.

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

Makarov, S. V.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Makin, V. S.

A. Y. Vorobyev, V. S. Makin, and C. Guo, “Optical properties of femtosecond laser-induced periodic surface structures on metals,” in 2009 52nd IEEE International Midwest Symposium on Circuits and SystemsIEEE, 2009), pp. 909–912.
[Crossref]

Malasi, A.

A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
[Crossref]

Mao, F.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Milichko, V. A.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Mock, J. J.

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

Mortensen, N. A.

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

Moskvin, M. K.

Mozharov, A. M.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Mukherjee, T.

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

Mukhin, I. S.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Nagasaki, Y.

Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
[Crossref] [PubMed]

Nayak, P. D.

R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
[Crossref] [PubMed]

Nedyalkov, N. N.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Nejad, M. A. F.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Nguyen, C. T.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Nikov, R. G.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Novotny, L.

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

Odintsova, G.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Odintsova, G. V.

Otero, J. C.

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

Ozerov, I.

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Paniagua-Dominguez, R.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Paria, S.

R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
[Crossref] [PubMed]

Patsalas, P.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Phang, I. Y.

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

Pliatsikas, N.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Poitras, D.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Pors, A.

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

Pou, J.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Proust, J.

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Pshenichnov, V. E.

Pu, F.

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

Purbia, R.

R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
[Crossref] [PubMed]

Qiu, C.-W.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Qiu, H.

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

Ramunno, L.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Rauschenbach, B.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Ren, J.

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

Riveiro, A.

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

Roberts, A. S.

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

Romanov, V. V.

Rosenmann, D.

Rowe, M.

R. Hughes and M. Rowe, The coloring, bronzing and patination of metals (2000).

Sagan, Z.

Sancho-Parramon, J.

J. Sancho-Parramon, “Surface plasmon resonance broadening of metallic particles in the quasi-static approximation: a numerical study of size confinement and interparticle interaction effects,” Nanotechnology 20(23), 235706 (2009).
[Crossref] [PubMed]

Schultz, D. A.

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

Schultz, S.

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

Shahrajabian, M.

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Shimko, A.

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Shishkin, I. I.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Siozios, A.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Sliwinski, G.

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

Smith, D. R.

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

Soder, H.

Stan, L.

Storozhenko, D.

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

Suh, S. W.

S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
[Crossref]

Suzuki, M.

Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
[Crossref] [PubMed]

Takahara, J.

Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
[Crossref] [PubMed]

Tan, S. J.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Toliopoulos, D.

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Tong, Q. C.

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Untracht, O.

O. Untracht, Jewelry Concepts & Technology (Doubleday, 2011).

Vannahme, C.

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

Veiko, V.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Veiko, V. P.

Vlasova, E.

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

Vlasova, E. A.

Vorobyev, A. Y.

A. Y. Vorobyev and C. Guo, “Colorizing metals with femtosecond laser pulses,” Appl. Phys. Lett. 92(4), 041914 (2008).
[Crossref]

A. Y. Vorobyev, V. S. Makin, and C. Guo, “Optical properties of femtosecond laser-induced periodic surface structures on metals,” in 2009 52nd IEEE International Midwest Symposium on Circuits and SystemsIEEE, 2009), pp. 909–912.
[Crossref]

Wang, S.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Wang, X.

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

Wang, Y. M.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Weck, A.

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Wei, J. N.

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Werge-Hartley, J.

J. Werge-Hartley, Enamelling on precious metals (Crowood Press, Limited, 2010).

Wrzosek, B.

B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).

Yang, J. K. W.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Yang, X.

Yang, Z.

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

Yatsuk, R. M.

Yu, Y. F.

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

Zhang, C.

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Zhang, L.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Zhu, D.

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

Zhu, X.

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

Zijlstra, P.

P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
[Crossref] [PubMed]

Zuev, D. A.

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

ACS Appl. Mater. Interfaces (2)

F. Pu, Y. Huang, Z. Yang, H. Qiu, and J. Ren, “Nucleotide-based assemblies for green synthesis of silver nanoparticles with controlled localized surface plasmon resonances and their applications,” ACS Appl. Mater. Interfaces 10(12), 9929–9937 (2018).
[Crossref] [PubMed]

X. Wang, A. Kuchmizhak, D. Storozhenko, S. Makarov, and S. Juodkazis, “Single-step laser plasmonic coloration of metal films,” ACS Appl. Mater. Interfaces 10(1), 1422–1427 (2018).
[Crossref] [PubMed]

ACS Nano (2)

L. Duempelmann, D. Casari, A. Luu-Dinh, B. Gallinet, and L. Novotny, “Color rendering plasmonic aluminum substrates with angular symmetry breaking,” ACS Nano 9(12), 12383–12391 (2015).
[Crossref] [PubMed]

J. Proust, F. Bedu, B. Gallas, I. Ozerov, and N. Bonod, “All-dielectric colored metasurfaces with silicon mie resonators,” ACS Nano 10(8), 7761–7767 (2016).
[Crossref] [PubMed]

Appl. Phys. Lett. (1)

A. Y. Vorobyev and C. Guo, “Colorizing metals with femtosecond laser pulses,” Appl. Phys. Lett. 92(4), 041914 (2008).
[Crossref]

Appl. Phys., A Mater. Sci. Process. (1)

G. Li, J. Li, Y. Hu, C. Zhang, X. Li, J. Chu, and W. Huang, “Femtosecond laser color marking stainless steel surface with different wavelengths,” Appl. Phys., A Mater. Sci. Process. 118(4), 1189–1196 (2015).
[Crossref]

Appl. Surf. Sci. (3)

M. Boutinguiza, R. Comesaña, F. Lusquiños, A. Riveiro, J. Del Val, and J. Pou, “Production of silver nanoparticles by laser ablation in open air,” Appl. Surf. Sci. 336, 108–111 (2015).
[Crossref]

R. G. Nikov, N. N. Nedyalkov, P. A. Atanasov, D. Hirsch, B. Rauschenbach, K. Grochowska, and G. Sliwinski, “Characterization of Ag nanostructures fabricated by laser-induced dewetting of thin films,” Appl. Surf. Sci. 374, 36–41 (2016).
[Crossref]

J. Lv, F. Lai, L. Lin, Y. Lin, Z. Huang, and R. Chen, “Thermal stability of Ag films in air prepared by thermal evaporation,” Appl. Surf. Sci. 253(17), 7036–7040 (2007).
[Crossref]

Chem. Phys. Lett. (1)

N. Biswas, S. Kapoor, H. S. Mahal, and T. Mukherjee, “Adsorption of CGA on colloidal silver particles: DFT and SERS study,” Chem. Phys. Lett. 444(4–6), 338–345 (2007).
[Crossref]

J. Chem. Phys. (1)

J. J. Mock, M. Barbic, D. R. Smith, D. A. Schultz, and S. Schultz, “Shape effects in plasmon resonance of individual colloidal silver nanoparticles,” J. Chem. Phys. 116(15), 6755–6759 (2002).
[Crossref]

J. Opt. (1)

A. Malasi, R. Kalyanaraman, and H. Garcia, “From Mie to Fresnel through effective medium approximation with multipole contributions,” J. Opt. 16(6), 065001 (2014).
[Crossref]

J. Raman Spectrosc. (3)

J. L. Castro, M. R. López-Ramirez, J. F. Arenas, and J. C. Otero, “Surface-enhanced Raman scattering of 3-mercaptopropionic acid adsorbed on a colloidal silver surface,” J. Raman Spectrosc. 35(11), 997–1000 (2004).
[Crossref]

S. K. Kim, M. S. Kim, and S. W. Suh, “Surface-enhanced Raman scattering (SERS) of aromatic amino acids and their glycyl dipeptides in silver sol,” J. Raman Spectrosc. 18(3), 171–175 (1987).
[Crossref]

B. Wrzosek, J. Bukowska, and A. Kudelski, “Raman study on the structure of adlayers formed on silver from mixtures of 2-aminoethanethiol and 3-mercaptopropionic acid,” J. Raman Spectrosc. 36(11), 1040–1046 (2005).

Langmuir (1)

C. Ma and J. M. Harris, “Surface-enhanced Raman scattering study of the kinetics of self-assembly of carboxylate-terminated n-alkanethiols on silver,” Langmuir 28(5), 2628–2636 (2012).
[Crossref] [PubMed]

Laser Photonics Rev. (1)

S. V. Makarov, V. A. Milichko, I. S. Mukhin, I. I. Shishkin, D. A. Zuev, A. M. Mozharov, A. E. Krasnok, and P. A. Belov, “Controllable femtosecond laser-induced dewetting for plasmonic applications,” Laser Photonics Rev. 10(1), 91–99 (2016).
[Crossref]

Mater. Des. (1)

V. Veiko, G. Odintsova, E. Gorbunova, E. Ageev, A. Shimko, Y. Karlagina, and Y. Andreeva, “Development of complete color palette based on spectrophotometric measurements of steel oxidation results for enhancement of color laser marking technology,” Mater. Des. 89, 684–688 (2016).
[Crossref]

Met. Finish. (1)

“Insoluble anodes for precious metal plating,” Met. Finish. 93(9), 94 (1995).
[Crossref]

Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. (1)

F. Brihmat-Hamadi, E. H. Amara, and H. Kellou, “Characterization of titanium oxide layers Formation produced by nanosecond laser coloration,” Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci. 48(3), 1439–1449 (2017).
[Crossref]

Nano Lett. (5)

Z. Dong, J. Ho, Y. F. Yu, Y. H. Fu, R. Paniagua-Dominguez, S. Wang, A. I. Kuznetsov, and J. K. W. Yang, “Printing beyond sRGB color gamut by mimicking silicon nanostructures in free-space,” Nano Lett. 17(12), 7620–7628 (2017).
[Crossref] [PubMed]

L. Cao, P. Fan, E. S. Barnard, A. M. Brown, and M. L. Brongersma, “Tuning the color of silicon nanostructures,” Nano Lett. 10(7), 2649–2654 (2010).
[Crossref] [PubMed]

Y. Nagasaki, M. Suzuki, and J. Takahara, “All-dielectric dual-color pixel with subwavelength resolution,” Nano Lett. 17(12), 7500–7506 (2017).
[Crossref] [PubMed]

S. J. Tan, L. Zhang, D. Zhu, X. M. Goh, Y. M. Wang, K. Kumar, C.-W. Qiu, and J. K. W. Yang, “Plasmonic color palettes for photorealistic printing with aluminum nanostructures,” Nano Lett. 14(7), 4023–4029 (2014).
[Crossref] [PubMed]

A. S. Roberts, A. Pors, O. Albrektsen, and S. I. Bozhevolnyi, “Subwavelength plasmonic color printing protected for ambient use,” Nano Lett. 14(2), 783–787 (2014).
[Crossref] [PubMed]

Nanoscale (5)

A. Bigdeli, F. Ghasemi, H. Golmohammadi, S. Abbasi-Moayed, M. A. F. Nejad, N. Fahimi-Kashani, S. Jafarinejad, M. Shahrajabian, and M. R. Hormozi-Nezhad, “Nanoparticle-based optical sensor arrays,” Nanoscale 9(43), 16546–16563 (2017).
[Crossref] [PubMed]

Y. Cui, R. S. Hegde, I. Y. Phang, H. K. Lee, and X. Y. Ling, “Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications,” Nanoscale 6(1), 282–288 (2014).
[Crossref] [PubMed]

R. Purbia, P. D. Nayak, and S. Paria, “Visible light-induced Ag nanoparticle deposited urchin-like structures for enhanced SERS application,” Nanoscale 10(27), 12970–12974 (2018).
[Crossref] [PubMed]

C.-H. Chou and F.-C. Chen, “Plasmonic nanostructures for light trapping in organic photovoltaic devices,” Nanoscale 6(15), 8444–8458 (2014).
[Crossref] [PubMed]

N. Kalfagiannis, A. Siozios, D. V. Bellas, D. Toliopoulos, L. Bowen, N. Pliatsikas, W. M. Cranton, C. Kosmidis, D. C. Koutsogeorgis, E. Lidorikis, and P. Patsalas, “Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring,” Nanoscale 8(15), 8236–8244 (2016).
[Crossref] [PubMed]

Nanotechnology (1)

J. Sancho-Parramon, “Surface plasmon resonance broadening of metallic particles in the quasi-static approximation: a numerical study of size confinement and interparticle interaction effects,” Nanotechnology 20(23), 235706 (2009).
[Crossref] [PubMed]

Nat. Commun. (1)

J.-M. Guay, A. Calà Lesina, G. Côté, M. Charron, D. Poitras, L. Ramunno, P. Berini, and A. Weck, “Laser-induced plasmonic colours on metals,” Nat. Commun. 8, 16095–16107 (2017).
[Crossref] [PubMed]

Nat. Nanotechnol. (2)

X. Zhu, C. Vannahme, E. Højlund-Nielsen, N. A. Mortensen, and A. Kristensen, “Plasmonic colour laser printing,” Nat. Nanotechnol. 11(4), 325–329 (2016).
[Crossref] [PubMed]

K. Kumar, H. Duan, R. S. Hegde, S. C. W. Koh, J. N. Wei, and J. K. W. Yang, “Printing colour at the optical diffraction limit,” Nat. Nanotechnol. 7(9), 557–561 (2012).
[Crossref] [PubMed]

Nature (1)

P. Zijlstra, J. W. M. Chon, and M. Gu, “Five-dimensional optical recording mediated by surface plasmons in gold nanorods,” Nature 459(7245), 410–413 (2009).
[Crossref] [PubMed]

Opt. Express (3)

Opt. Laser Technol. (2)

V. Veiko, G. Odintsova, E. Vlasova, Y. Andreeva, A. Krivonosov, E. Ageev, and E. Gorbunova, “Laser coloration of titanium films : New development for jewelry and decoration,” Opt. Laser Technol. 93, 9–13 (2017).
[Crossref]

L. Bartlett, “An unusual phenomenon observed when anodising CP titanium to produce coloured surfaces for jewellery and other decorative uses,” Opt. Laser Technol. 38(4–6), 440–444 (2006).
[Crossref]

Opt. Lasers Eng. (1)

E. Akman and E. Cerkezoglu, “Compositional and micro-scratch analyses of laser induced colored surface of titanium,” Opt. Lasers Eng. 84, 37–43 (2016).
[Crossref]

Plasmonics (1)

F. Mao, A. Davis, Q. C. Tong, M. H. Luong, C. T. Nguyen, I. Ledoux-Rak, and N. D. Lai, “Direct laser writing of gold nanostructures: application to data storage and color nanoprinting,” Plasmonics 13(6), 2285–2291 (2018).
[Crossref]

Rev. Mex. Fis. (1)

I. A. López, M. Ceballos, G. Hernández, L. Acosta, and I. Gómez, “Shape transformation from silver triangular nanoprisms to nanodisks: Raman characterization and sculpturing mechanism,” Rev. Mex. Fis. 61(2), 77–82 (2015).

Other (8)

D. W. Mayo, F. A. Miller, and R. W. Hannah, Course notes on the interpretation of infrared and Raman spectra (John Wiley & Sons, 2004).

U. Kreibig and M. Vollmer, Optical properties of metal clusters Springer series in materials science (Springer, 1995).

W. Theiß, “The use of effective medium theories in optical spectroscopy,” in R. Helbig (eds) Advances in Solid State Physics 33, 149–176 (Springer, 1994).

D. Duprez and F. Cavani, Handbook of Advanced Methods and processes in oxidation catalysis: from laboratory to industry (World Scientific, 2014).

J. Werge-Hartley, Enamelling on precious metals (Crowood Press, Limited, 2010).

O. Untracht, Jewelry Concepts & Technology (Doubleday, 2011).

R. Hughes and M. Rowe, The coloring, bronzing and patination of metals (2000).

A. Y. Vorobyev, V. S. Makin, and C. Guo, “Optical properties of femtosecond laser-induced periodic surface structures on metals,” in 2009 52nd IEEE International Midwest Symposium on Circuits and SystemsIEEE, 2009), pp. 909–912.
[Crossref]

Supplementary Material (2)

NameDescription
» Visualization 1       The process of laser decoration of silver (sample 1)
» Visualization 2       The process of laser decoration of silver (sample 2)

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (7)

Fig. 1
Fig. 1 A laser device used in this work to form nanoparticles on a silver surface.
Fig. 2
Fig. 2 The color palettes developed on the surface of silver under the following modes of laser action: I = [(2.80-3.38)·108 W/cm2], A: Nx = [8–17], Ny = 4; B: Nx = 11, Ny = [2–11].
Fig. 3
Fig. 3 Color characterization of the samples: Reflection spectra of the surface of silver samples (from S1 to S10) after laser action (A), the color coordinates of palettes shown in Fig. 2 (for the C light source), marked on CIE xy Chromaticity diagram (B).
Fig. 4
Fig. 4 The morphology of obtained colors on the samples S1 (a), S5 (b), S7 (c), S10 (d): Optical microimages, SEM images, and size distribution histograms: 2r(S1) = 15 ± 6 nm, 2r(S5) = 18 ± 7 nm, 2r(S7) = 24 ± 5 nm, 2r(S10) = 43 ± 10 nm
Fig. 5
Fig. 5 Reflectance spectra of the silver substrate covered by NPs of radiuses r(S1) = 6.5 nm, r(S5) = 9 nm, r(S7) = 10 nm, r(S10) = 21.5 nm: dashed – experimental, solid – simulated results; vertical lines show SPR peak positions.
Fig. 6
Fig. 6 Typical Raman spectra of the silver substrate after laser exposure: raw data (red) and baseline corrected with further normalization (black).
Fig. 7
Fig. 7 Application of laser decoration of silver.

Tables (1)

Tables Icon

Table 1 Energy Dispersive X-Ray Analysis (EDX) of samples.

Equations (3)

Equations on this page are rendered with MathJax. Learn more.

R NPs = ( Re ε eff 1 ) 2 + ( Im ε eff ) 2 ( Re ε eff +1 ) 2 + ( Im ε eff ) 2 ,
T NPs = ( 1 R NPs ) 2 exp( 2 ω c Im ε eff h ) 1 R NPs 2 exp( 4 ω c Im ε eff h ) ,
R All = R NPs +( 1 ν N ) T NPs R Ag ,

Metrics