Abstract

The formation of periodic structures on stainless steel under linearly polarized multi-burst picosecond laser pulses irradiation was experimentally investigated. The resulting structures were characterized by scanning electron microscopy (SEM) analysis. This analysis of images revealed four distinctive (quasi-) periodic structures depending on the laser irradiation parameters, i.e., LSFLs, HSFLs, micro-grooves and nano-holes. It is demonstrated that the multi-burst picosecond pulses technique is capable of fabricating periodic structures with different scales and shapes.

© 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Fabrication of ordered hierarchical structures on stainless steel by picosecond laser for modified wettability applications

Xingsheng Wang, Chengyu Li, Wei Hong, Chenbin Ma, Youqiang Xing, and Jun Feng
Opt. Express 26(15) 18998-19008 (2018)

Experimental study of fs-laser induced sub-100-nm periodic surface structures on titanium

Chandra S.R. Nathala, Ali Ajami, Andrey A. Ionin, Sergey I. Kudryashov, Sergey V Makarov, Thomas Ganz, Andreas Assion, and Wolfgang Husinsky
Opt. Express 23(5) 5915-5929 (2015)

Laser induced periodic surface structure formation in germanium by strong field mid IR laser solid interaction at oblique incidence

Drake R. Austin, Kyle R. P. Kafka, Simeon Trendafilov, Gennady Shvets, Hui Li, Allen Y. Yi, Urszula B. Szafruga, Zhou Wang, Yu Hang Lai, Cosmin I. Blaga, Louis F. DiMauro, and Enam A. Chowdhury
Opt. Express 23(15) 19522-19534 (2015)

References

  • View by:
  • |
  • |
  • |

  1. J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
    [Crossref]
  2. J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
    [Crossref]
  3. Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
    [Crossref]
  4. A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
    [Crossref]
  5. J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
    [Crossref]
  6. J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
    [Crossref]
  7. F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
    [Crossref] [PubMed]
  8. J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
    [Crossref]
  9. R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
    [Crossref]
  10. X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
    [Crossref] [PubMed]
  11. A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
    [Crossref]
  12. S. Nolte, F. Schrempel, and F. Dausinger, Ultrashort Pulse Laser Technology: Laser Sources and Applications, Springer Series in Optical Sciences (Springer, 2016).
  13. F. Fraggelakis, G. Mincuzzi, J. Lopez, I. Manek-Hönninger, and R. Kling, “Texturing metal surface with MHz ultra-short laser pulses,” Opt. Express 25(15), 18131–18139 (2017).
    [Crossref] [PubMed]
  14. G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
    [Crossref]
  15. J. M. Guay, A. C. Lesina, J. Baxter, M. Charron, G. Côté, L. Ramunno, and A. Weck, “Enhanced plasmonic coloring of silver and formation of large laser-induced periodic surface structures using multi-burst picosecond pulses,” arXiv Prepr. 1609.04847 (2016).
  16. W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
    [Crossref]
  17. X. Shi, L. Jiang, X. Li, S. Wang, Y. Yuan, and Y. Lu, “Femtosecond laser-induced periodic structure adjustments based on electron dynamics control: from subwavelength ripples to double-grating structures,” Opt. Lett. 38(19), 3743–3746 (2013).
    [Crossref] [PubMed]
  18. J. M. Liu, “Simple technique for measurements of pulsed Gaussian-beam spot sizes,” Opt. Lett. 7(5), 196–198 (1982).
    [Crossref] [PubMed]
  19. P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
    [Crossref]
  20. B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
    [Crossref]

2017 (3)

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

F. Fraggelakis, G. Mincuzzi, J. Lopez, I. Manek-Hönninger, and R. Kling, “Texturing metal surface with MHz ultra-short laser pulses,” Opt. Express 25(15), 18131–18139 (2017).
[Crossref] [PubMed]

2016 (4)

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

2015 (2)

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
[Crossref]

2014 (2)

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

2013 (1)

2011 (2)

F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
[Crossref] [PubMed]

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

2010 (1)

W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
[Crossref]

2002 (1)

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

1983 (1)

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

1982 (1)

Almeida, A.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Bonse, J.

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Bounhalli, M.

Colombier, J. P.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
[Crossref] [PubMed]

Costache, F.

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

Cunha, A.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

do Rego, A. M. B.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Dörr, D.

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Douillard, T.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Elie, A. M.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Esnouf, C.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Fan, P.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Faure, N.

Fotakis, C.

G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
[Crossref]

Fraggelakis, F.

Garrelie, F.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
[Crossref] [PubMed]

Gregorcic, P.

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

Hartelt, M.

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Henyk, M.

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

Höhm, S.

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Hu, W.

W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
[Crossref]

Jiang, G.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Jiang, L.

King, G.

W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
[Crossref]

Kirner, S. V.

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

Kling, R.

Koter, R.

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Krüger, J.

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Le Harzic, R.

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Li, X.

Liang, Q.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Lin, C.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Liu, B.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Liu, J. M.

Liu, L.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Long, J.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Lopez, J.

Lu, Y.

Manek-Hönninger, I.

Maurice, C.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Mei, X.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Mei, X. S.

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Mincuzzi, G.

Pan, A. F.

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Pandelov, S. V.

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

Parriaux, O.

Pentzien, S.

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Pigeon, F.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
[Crossref] [PubMed]

Plawinski, L.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Podgornik, B.

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

Preston, J. S.

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

Reif, J.

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

Reynaud, S.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

F. Garrelie, J. P. Colombier, F. Pigeon, S. Tonchev, N. Faure, M. Bounhalli, S. Reynaud, and O. Parriaux, “Evidence of surface plasmon resonance in ultrafast laser-induced ripples,” Opt. Express 19(10), 9035–9043 (2011).
[Crossref] [PubMed]

Rosenfeld, A.

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

Sauer, D.

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Sedao, X.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Sedlacek, M.

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

Serro, A. P.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Shi, X.

Shin, Y. C.

W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
[Crossref]

Shugaev, M. V.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Sipe, J. E.

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

Spaltmann, D.

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

Stracke, F.

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Stratakis, E.

G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
[Crossref]

Sun, X. F.

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Tonchev, S.

Tsibidis, G. D.

G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
[Crossref]

van Driel, H. M.

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

Vilar, R.

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

Wang, J.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Wang, K.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Wang, S.

Wang, W.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Wang, W. J.

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Wang, Z.

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Wu, A.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Wu, C.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Xie, Y.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Yang, H. Z.

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Young, J. F.

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

Yuan, Y.

Zhang, H.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Zhang, Y.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Zhao, Y.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Zhigilei, L. V.

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Zhong, M.

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Zhou, Y. N.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

Zimmermann, H.

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Zou, G.

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

ACS Nano (1)

X. Sedao, M. V. Shugaev, C. Wu, T. Douillard, C. Esnouf, C. Maurice, S. Reynaud, F. Pigeon, F. Garrelie, L. V. Zhigilei, and J. P. Colombier, “Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification,” ACS Nano 10(7), 6995–7007 (2016).
[Crossref] [PubMed]

Appl. Phys. B (1)

A. F. Pan, W. J. Wang, X. S. Mei, H. Z. Yang, and X. F. Sun, “The formation mechanism and evolution of ps-laser-induced high-spatial-frequency periodic surface structures on titanium,” Appl. Phys. B 123(1), 21 (2017).
[Crossref]

Appl. Phys. Lett. (1)

R. Le Harzic, D. Dörr, D. Sauer, F. Stracke, and H. Zimmermann, “Generation of high spatial frequency ripples on silicon under ultrashort laser pulses irradiation,” Appl. Phys. Lett. 98(21), 211905 (2011).
[Crossref]

Appl. Phys., A Mater. Sci. Process. (1)

W. Hu, Y. C. Shin, and G. King, “Modeling of multi-burst mode pico-second laser ablation for improved material removal rate,” Appl. Phys., A Mater. Sci. Process. 98(2), 407–415 (2010).
[Crossref]

Appl. Surf. Sci. (6)

P. Gregorčič, M. Sedlaček, B. Podgornik, and J. Reif, “Formation of laser-induced periodic surface structures (LIPSS) on tool steel by multiple picosecond laser pulses of different polarizations,” Appl. Surf. Sci. 387, 698–706 (2016).
[Crossref]

J. Reif, F. Costache, M. Henyk, and S. V. Pandelov, “Ripples revisited: non-classical morphology at the bottom of femtosecond laser ablation craters in transparent dielectrics,” Appl. Surf. Sci. 197–198, 891–895 (2002).
[Crossref]

J. Long, P. Fan, M. Zhong, H. Zhang, Y. Xie, and C. Lin, “Superhydrophobic and colorful copper surfaces fabricated by picosecond laser induced periodic nanostructures,” Appl. Surf. Sci. 311, 461–467 (2014).
[Crossref]

Y. Zhang, G. Zou, L. Liu, Y. Zhao, Q. Liang, A. Wu, and Y. N. Zhou, “Time-dependent wettability of nano-patterned surfaces fabricated by femtosecond laser with high efficiency,” Appl. Surf. Sci. 389, 554–559 (2016).
[Crossref]

A. Cunha, A. M. Elie, L. Plawinski, A. P. Serro, A. M. B. do Rego, A. Almeida, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci. 360, 485–493 (2016).
[Crossref]

J. Bonse, R. Koter, M. Hartelt, D. Spaltmann, S. Pentzien, S. Höhm, and J. Krüger, “Tribological performance of femtosecond laser-induced periodic surface structures on titanium and a high toughness bearing steel,” Appl. Surf. Sci. 336, 21–27 (2015).
[Crossref]

IEEE J. Sel. Top. Quantum Electron. (1)

J. Bonse, S. Höhm, S. V. Kirner, A. Rosenfeld, and J. Krüger, “Laser-induced periodic surface structures—a scientific evergreen,” IEEE J. Sel. Top. Quantum Electron. 23(3), 9000615 (2017).
[Crossref]

J. Laser Appl. (1)

B. Liu, W. Wang, G. Jiang, X. Mei, K. Wang, J. Wang, and Z. Wang, “Evolution of nano-ripples on stainless steel irradiated by picosecond laser pulses,” J. Laser Appl. 26(1), 012001 (2014).
[Crossref]

Opt. Express (2)

Opt. Lett. (2)

Phys. Rev. B (2)

G. D. Tsibidis, C. Fotakis, and E. Stratakis, “From ripples to spikes: A hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures,” Phys. Rev. B 92(4), 041405 (2015).
[Crossref]

J. E. Sipe, J. F. Young, J. S. Preston, and H. M. van Driel, “Laser-induced periodic surface structure. I. Theory,” Phys. Rev. B 27(2), 1141–1154 (1983).
[Crossref]

Other (2)

S. Nolte, F. Schrempel, and F. Dausinger, Ultrashort Pulse Laser Technology: Laser Sources and Applications, Springer Series in Optical Sciences (Springer, 2016).

J. M. Guay, A. C. Lesina, J. Baxter, M. Charron, G. Côté, L. Ramunno, and A. Weck, “Enhanced plasmonic coloring of silver and formation of large laser-induced periodic surface structures using multi-burst picosecond pulses,” arXiv Prepr. 1609.04847 (2016).

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (4)

Fig. 1
Fig. 1 (a) Schematic of several bursts. (b) Schematic of laser setup
Fig. 2
Fig. 2 SEM images showing the surface evolution at the laser fluence of 0.25 J/cm2 and the scanning speed of 5 mm/s with different subpulse numbers. PPB and PPS indicate the number of subpulses and pulses per spot. The red arrow shows the polarization direction.
Fig. 3
Fig. 3 SEM images showing the surface evolution at the laser fluence of 0.54 J/cm2 and the scanning speed of 10 mm/s with different subpulse numbers. PPB and PPS indicate the number of subpulses and pulses per spot. The red arrow shows the polarization direction.
Fig. 4
Fig. 4 SEM images showing the surface evolution at the laser fluence of 1.44 J/cm2 and the scanning speed of 10 mm/s with different subpulse numbers. PPB and PPS indicate the number of subpulses and pulses per spot. The red arrow shows the polarization direction.

Metrics