Abstract

We demonstrate a self-starting 700 MHz repetition rate Yb:fiber laser incorporated with a phase biased nonlinear amplifying loop mirror as an artificial saturable absorber. The laser delivers a maximum power of 150 mW and a pulse width of 215 fs at a pump power of 710 mW. The integration of relative intensity noise (RIN) between 10 Hz and 10 MHz results in a minimum integrated RIN of 0.015%. The phase noise of the fundamental repetition rate was also characterized at different net-cavity dispersion. Although the laser is made of nonpolarization maintaining fiber, the mode locking sustains over two weeks in open air, showing its environmental stability.

© 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Full Article  |  PDF Article
OSA Recommended Articles
Robust optical-frequency-comb based on the hybrid mode-locked Er:fiber femtosecond laser

Yanyan Zhang, Songtao Fan, Lulu Yan, Long Zhang, Xiaofei Zhang, Wenge Guo, Shougang Zhang, and Haifeng Jiang
Opt. Express 25(18) 21719-21725 (2017)

870  fs, 448  kHz pulses from an all-polarization-maintaining Yb-doped fiber laser with a nonlinear amplifying loop mirror

Shangming Ou, Guanyu Liu, Liang Guo, Zhigang Zhang, and Qingmao Zhang
Appl. Opt. 57(18) 5068-5071 (2018)

Highly-stable mode-locked PM Yb-fiber laser with 10 nJ in 93-fs at 6 MHz using NALM

Yang Yu, Hao Teng, Huibo Wang, Lina Wang, Jiangfeng Zhu, Shaobo Fang, Guoqing Chang, Junli Wang, and Zhiyi Wei
Opt. Express 26(8) 10428-10434 (2018)

References

  • View by:
  • |
  • |
  • |

  1. C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
    [Crossref] [PubMed]
  2. J. Ruppe, S. Chen, T. Zhou, M. Sheikhsofla, Z. Zhang, G. Chang, F. Kärtner, J. Nees, and A. Galvanauskas, “Coherent Pulse Stacking Extension of CPA to 9ns Effectively-Long Stretched Pulse Duration,” in Conference on Lasers and Electro-Optics, OSA Technical Digest (2016) (Optical Society of America, 2016), paper SM4I.2.
    [Crossref]
  3. C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
    [Crossref] [PubMed]
  4. T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
    [Crossref] [PubMed]
  5. A. Klenner and U. Keller, “All-optical Q-switching limiter for high-power gigahertz modelocked diode-pumped solid-state lasers,” Opt. Express 23(7), 8532–8544 (2015).
    [Crossref] [PubMed]
  6. M. Mangold, M. Golling, E. Gini, B. W. Tilma, and U. Keller, “Sub-300-femtosecond operation from a MIXSEL,” Opt. Express 23(17), 22043–22059 (2015).
    [Crossref] [PubMed]
  7. M. Y. Sander, H. Byun, M. Dahlem, D. Chao, A. R. Motamedi, G. Petrich, L. Kolodziejski, S. Frolov, H. Hao, J. Shmulovich, E. P. Ippen, and F. X. Kaertner, “10GHz Waveguide Interleaved Femtosecond Pulse Train,” in CLEO:2011- Laser Applications to Photonic Applications, OSA Technical Digest (CD) (Optical Society of America, 2011), paper CThY6.
  8. C. Li, Y. Ma, X. Gao, F. Niu, T. Jiang, A. Wang, and Z. Zhang, “1 GHz repetition rate femtosecond Yb:fiber laser for direct generation of carrier-envelope offset frequency,” Appl. Opt. 54(28), 8350–8353 (2015).
    [Crossref] [PubMed]
  9. H. Cheng, W. Wang, Y. Zhou, T. Qiao, W. Lin, S. Xu, and Z. Yang, “5 GHz fundamental repetition rate, wavelength tunable, all-fiber passively mode-locked Yb-fiber laser,” Opt. Express 25(22), 27646–27651 (2017).
    [Crossref] [PubMed]
  10. H. Cheng, W. Wang, Y. Zhou, T. Qiao, W. Lin, Y. Guo, S. Xu, and Z. Yang, “High-repetition-rate ultrafast fiber lasers,” Opt. Express 26(13), 16411–16421 (2018).
    [Crossref] [PubMed]
  11. M. E. Fermann, F. Haberl, M. Hofer, and H. Hochreiter, “Nonlinear amplifying loop mirror,” Opt. Lett. 15(13), 752–754 (1990).
    [Crossref] [PubMed]
  12. L. M. Zhao, A. C. Bartnik, Q. Q. Tai, and F. W. Wise, “Generation of 8 nJ pulses from a dissipative-soliton fiber laser with a nonlinear optical loop mirror,” Opt. Lett. 38(11), 1942–1944 (2013).
    [Crossref] [PubMed]
  13. C. Aguergaray, N. G. R. Broderick, M. Erkintalo, J. S. Y. Chen, and V. Kruglov, “Mode-locked femtosecond all-normal all-PM Yb-doped fiber laser using a nonlinear amplifying loop mirror,” Opt. Express 20(10), 10545–10551 (2012).
    [Crossref] [PubMed]
  14. C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
    [Crossref]
  15. J. Szczepanek, T. M. Kardaś, M. Michalska, C. Radzewicz, and Y. Stepanenko, “Simple all-PM-fiber laser mode-locked with a nonlinear loop mirror,” Opt. Lett. 40(15), 3500–3503 (2015).
    [Crossref] [PubMed]
  16. T. Jiang, Y. Cui, P. Lu, C. Li, A. Wang, and Z. Zhang, “All PM fiber laser mode locked with a compact phase biased amplifier loop mirror,” IEEE Photonics Technol. Lett. 28(16), 1786–1789 (2016).
    [Crossref]
  17. N. Kuse, J. Jiang, C.-C. Lee, T. R. Schibli, and M. E. Fermann, “All polarization-maintaining Er fiber-based optical frequency combs with nonlinear amplifying loop mirror,” Opt. Express 24(3), 3095–3102 (2016).
    [Crossref] [PubMed]
  18. F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
    [Crossref]
  19. W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
    [Crossref]
  20. C. Li, G. Wang, T. Jiang, A. Wang, and Z. Zhang, “750 MHz fundamental repetition rate femtosecond Yb:fiber ring laser,” Opt. Lett. 38(3), 314–316 (2013).
    [Crossref] [PubMed]

2018 (1)

2017 (3)

H. Cheng, W. Wang, Y. Zhou, T. Qiao, W. Lin, S. Xu, and Z. Yang, “5 GHz fundamental repetition rate, wavelength tunable, all-fiber passively mode-locked Yb-fiber laser,” Opt. Express 25(22), 27646–27651 (2017).
[Crossref] [PubMed]

F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
[Crossref]

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

2016 (3)

T. Jiang, Y. Cui, P. Lu, C. Li, A. Wang, and Z. Zhang, “All PM fiber laser mode locked with a compact phase biased amplifier loop mirror,” IEEE Photonics Technol. Lett. 28(16), 1786–1789 (2016).
[Crossref]

N. Kuse, J. Jiang, C.-C. Lee, T. R. Schibli, and M. E. Fermann, “All polarization-maintaining Er fiber-based optical frequency combs with nonlinear amplifying loop mirror,” Opt. Express 24(3), 3095–3102 (2016).
[Crossref] [PubMed]

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

2015 (4)

2013 (3)

2012 (2)

C. Aguergaray, N. G. R. Broderick, M. Erkintalo, J. S. Y. Chen, and V. Kruglov, “Mode-locked femtosecond all-normal all-PM Yb-doped fiber laser using a nonlinear amplifying loop mirror,” Opt. Express 20(10), 10545–10551 (2012).
[Crossref] [PubMed]

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

2008 (1)

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

1990 (1)

Aguergaray, C.

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

C. Aguergaray, N. G. R. Broderick, M. Erkintalo, J. S. Y. Chen, and V. Kruglov, “Mode-locked femtosecond all-normal all-PM Yb-doped fiber laser using a nonlinear amplifying loop mirror,” Opt. Express 20(10), 10545–10551 (2012).
[Crossref] [PubMed]

Akçaalan, Ö.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Asik, M. D.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Bartnik, A. C.

Benedick, A. J.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Broderick, N. G.

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

Broderick, N. G. R.

Çetin, B.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Chen, F.

F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
[Crossref]

Chen, J. S. Y.

Cheng, H.

Cleff, C.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Cui, Y.

T. Jiang, Y. Cui, P. Lu, C. Li, A. Wang, and Z. Zhang, “All PM fiber laser mode locked with a compact phase biased amplifier loop mirror,” IEEE Photonics Technol. Lett. 28(16), 1786–1789 (2016).
[Crossref]

Curto, G. L.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Dobner, S.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Doubek, R.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Elahi, P.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Erkintalo, M.

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

C. Aguergaray, N. G. R. Broderick, M. Erkintalo, J. S. Y. Chen, and V. Kruglov, “Mode-locked femtosecond all-normal all-PM Yb-doped fiber laser using a nonlinear amplifying loop mirror,” Opt. Express 20(10), 10545–10551 (2012).
[Crossref] [PubMed]

Fendel, P.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Fermann, M. E.

Fischer, M.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Gao, X.

Gini, E.

Giunta, M.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Glenday, A. G.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Golling, M.

González Hernández, J. I.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Guo, Y.

Haberl, F.

Hänsch, T. W.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Hänsel, W.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Hao, Q.

F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
[Crossref]

Hawker, R.

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

Hochreiter, H.

Hofer, M.

Holzwarth, R.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Hoogland, H.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Ilday, F. Ö.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Jiang, J.

Jiang, T.

Kalaycioglu, H.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Kardas, T. M.

Kärtner, F. X.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Keller, U.

Kerse, C.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Kesim, D. K.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Klenner, A.

Kruglov, V.

Kuse, N.

Lee, C.-C.

Li, C.

Li, C.-H.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Lin, W.

Lu, P.

T. Jiang, Y. Cui, P. Lu, C. Li, A. Wang, and Z. Zhang, “All PM fiber laser mode locked with a compact phase biased amplifier loop mirror,” IEEE Photonics Technol. Lett. 28(16), 1786–1789 (2016).
[Crossref]

Ma, Y.

Manescau, A.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Mangold, M.

Mayer, P.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Michalska, M.

Niu, F.

Öktem, B.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Pasquini, L.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Phillips, D. F.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Probst, R. A.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Qiao, T.

Radzewicz, C.

Rebolo, R.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Runge, A. F.

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

Sasselov, D.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Schibli, T. R.

Schmid, S.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Steinmetz, T.

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Stepanenko, Y.

Szczepanek, J.

Szentgyorgyi, A.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Tai, Q. Q.

Tilma, B. W.

Udem, T.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Walsworth, R. L.

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

Wang, A.

Wang, G.

Wang, W.

Wilken, T.

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Wise, F. W.

Xu, S.

Yang, Z.

Yavas, S.

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

Zeng, H.

F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
[Crossref]

Zhang, Z.

Zhao, L. M.

Zhou, Y.

Appl. Opt. (1)

Appl. Phys. B (1)

W. Hänsel, H. Hoogland, M. Giunta, S. Schmid, T. Steinmetz, R. Doubek, P. Mayer, S. Dobner, C. Cleff, M. Fischer, and R. Holzwarth, “All polarization maintaining fiber laser architecture for robust femtosecond pulse generation,” Appl. Phys. B 123(1), 1–6 (2017).
[Crossref]

Appl. Phys. Lett. (1)

C. Aguergaray, R. Hawker, A. F. Runge, M. Erkintalo, and N. G. Broderick, “120 fs, 4.2 nJ pulses from an all-normal-dispersion, polarization-maintaining, fiber laser,” Appl. Phys. Lett. 103(12), 3550–3554 (2013).
[Crossref]

IEEE Photonics Technol. Lett. (2)

T. Jiang, Y. Cui, P. Lu, C. Li, A. Wang, and Z. Zhang, “All PM fiber laser mode locked with a compact phase biased amplifier loop mirror,” IEEE Photonics Technol. Lett. 28(16), 1786–1789 (2016).
[Crossref]

F. Chen, Q. Hao, and H. Zeng, “Optimization of an NALM mode-locked all-PMEr:fiber lasersystem,” IEEE Photonics Technol. Lett. 29(23), 2119–2122 (2017).
[Crossref]

Nature (3)

C.-H. Li, A. J. Benedick, P. Fendel, A. G. Glenday, F. X. Kärtner, D. F. Phillips, D. Sasselov, A. Szentgyorgyi, and R. L. Walsworth, “A laser frequency comb that enables radial velocity measurements with a precision of 1 cm s(-1),” Nature 452(7187), 610–612 (2008).
[Crossref] [PubMed]

C. Kerse, H. Kalaycıoğlu, P. Elahi, B. Çetin, D. K. Kesim, Ö. Akçaalan, S. Yavaş, M. D. Aşık, B. Öktem, H. Hoogland, R. Holzwarth, and F. Ö. Ilday, “Ablation-cooled material removal with ultrafast bursts of pulses,” Nature 537(7618), 84–88 (2016).
[Crossref] [PubMed]

T. Wilken, G. L. Curto, R. A. Probst, T. Steinmetz, A. Manescau, L. Pasquini, J. I. González Hernández, R. Rebolo, T. W. Hänsch, T. Udem, and R. Holzwarth, “A spectrograph for exoplanet observations calibrated at the centimetre-per-second level,” Nature 485(7400), 611–614 (2012).
[Crossref] [PubMed]

Opt. Express (6)

Opt. Lett. (4)

Other (2)

M. Y. Sander, H. Byun, M. Dahlem, D. Chao, A. R. Motamedi, G. Petrich, L. Kolodziejski, S. Frolov, H. Hao, J. Shmulovich, E. P. Ippen, and F. X. Kaertner, “10GHz Waveguide Interleaved Femtosecond Pulse Train,” in CLEO:2011- Laser Applications to Photonic Applications, OSA Technical Digest (CD) (Optical Society of America, 2011), paper CThY6.

J. Ruppe, S. Chen, T. Zhou, M. Sheikhsofla, Z. Zhang, G. Chang, F. Kärtner, J. Nees, and A. Galvanauskas, “Coherent Pulse Stacking Extension of CPA to 9ns Effectively-Long Stretched Pulse Duration,” in Conference on Lasers and Electro-Optics, OSA Technical Digest (2016) (Optical Society of America, 2016), paper SM4I.2.
[Crossref]

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (5)

Fig. 1
Fig. 1 Schematic of the laser; PBS, polarization beam splitter;FR, Faraday rotator; HWP, half-wave plate; M, mirror; WDM-collimator, combined collimator andwavelength division multiplexer.
Fig. 2
Fig. 2 (a) Radio frequency spectrum of the laser; (b) Measured spectra of the pulses output from PBS1 (red curve) and PBS2 (black curve); (c) Fringe-resolved and intensity autocorrelation (inset) trace of the direct output pulses from PBS1; (d) Fringe-resolved and intensity autocorrelation (inset) trace of the direct output pulses from PBS2.
Fig. 3
Fig. 3 Power stability of output laser: (a) averagepower of the output1of the laser over 14 days in the open air; (b)average power of the output1 (blue curve) and output2 (red curve) of the laser over 24 hours covered by a box.
Fig. 4
Fig. 4 Relative intensity noise (RIN) traces of noise floor (black curve), port 1 (red curve),port 2 (blue curve) and 750 MHz NPE laser (purple curve); Axis on the right: integrated relative intensity fluctuation of port 1 (dashed curve) and port 2 (solid curve).
Fig. 5
Fig. 5 Phase noise characteristics of the high repetition rate NALM Yb:laser: (a) The measurements of the phase noise of port 1 (red curve) and port 2 (blue curve) and NPE fiber laser (black curve); (b) The phase noise at various net cavity dispersion.

Metrics