Abstract

Subsurface damage (SSD), especially photoactive impurities, degrades the performance of high energy optics by reduction in the laser induced damage threshold. As the polishing defects are trace content and lie beneath the surface, they are difficult to detect. We herein present a biological method to measure impurities on polished fused silica, based on the intense inhibiting ability about trace level of ceria on enzyme activity. And the enzyme activity is measured in the individual etching solutions of a sequential etching process. Results show that detectability of the biological method satisfies the needs of trace impurity detection with low cost and simple apparatus. Furthermore ceria can be used to tag SSD in lapped and polished optics.

© 2014 Optical Society of America

Full Article  |  PDF Article
OSA Recommended Articles
Subsurface damage measurement of ground fused silica parts by HF etching techniques

J. Neauport, C. Ambard, P. Cormont, N. Darbois, J. Destribats, C. Luitot, and O. Rondeau
Opt. Express 17(22) 20448-20456 (2009)

Subsurface damages of fused silica developed during deterministic small tool polishing

Haobo Cheng, Zhichao Dong, Xu Ye, and Hon-Yuen Tam
Opt. Express 22(15) 18588-18603 (2014)

Using STED and ELSM confocal microscopy for a better knowledge of fused silica polished glass interface

Rodolphe Catrin, Jérôme Neauport, Philippe Legros, Daniel Taroux, Thomas Corbineau, Philippe Cormont, and Cédric Maunier
Opt. Express 21(24) 29769-29779 (2013)

References

  • View by:
  • |
  • |
  • |

  1. X. Gao, G. Y. Feng, J. H. Han, and L. L. Zhai, “Investigation of laser-induced damage by various initiators on the subsurface of fused silica,” Opt. Express 20(20), 22095–22101 (2012).
    [Crossref] [PubMed]
  2. L. Hongjie, H. Jin, W. Fengrui, Z. Xinda, Y. Xin, Z. Xiaoyan, S. Laixi, J. Xiaodong, S. Zhan, and Z. Wanguo, “Subsurface defects of fused silica optics and laser induced damage at 351 nm,” Opt. Express 21(10), 12204–12217 (2013).
    [Crossref] [PubMed]
  3. M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
    [Crossref]
  4. H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
    [Crossref]
  5. P. E. Miller, J. D. Bude, T. I. Suratwala, N. Shen, T. A. Laurence, W. A. Steele, J. Menapace, M. D. Feit, and L. L. Wong, “Fracture-induced subbandgap absorption as a precursor to optical damage on fused silica surfaces,” Opt. Lett. 35(16), 2702–2704 (2010).
    [Crossref] [PubMed]
  6. D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
    [Crossref]
  7. M. A. Weyl, “Structure of subsurface layers and their role in glass technology,” J. Non-Cryst. Solids 19, 1–25 (1975).
    [Crossref]
  8. L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
    [Crossref]
  9. J. Wang and R. L. Maier, “Surface assessment of CaF2 deep-ultraviolet and vacuum-ultraviolet optical components by the quasi-Brewster angle technique,” Appl. Opt. 45(22), 5621–5628 (2006).
    [Crossref] [PubMed]
  10. X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
    [Crossref]
  11. X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
    [Crossref]
  12. Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
    [Crossref]
  13. J. A. Randi, J. C. Lambropoulos, and S. D. Jacobs, “Subsurface damage in some single crystalline optical materials,” Appl. Opt. 44(12), 2241–2249 (2005).
    [Crossref] [PubMed]
  14. T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
    [Crossref]
  15. B. Ma, Z. X. Shen, P. F. He, F. Sha, C. L. Wang, B. Wang, Y. Q. Ji, H. S. Liu, W. H. Li, and Z. S. Wang, “Evaluation and analysis of polished fused silica subsurface quality by the nanoindenter technique,” Appl. Opt. 50(9), C279–C285 (2011).
    [Crossref] [PubMed]
  16. M. Trost, T. Herffurth, D. Schmitz, S. Schröder, A. Duparré, and A. Tünnermann, “Evaluation of subsurface damage by light scattering techniques,” Appl. Opt. 52(26), 6579–6588 (2013).
    [Crossref] [PubMed]
  17. J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
    [Crossref]
  18. M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
    [Crossref]
  19. J. Neauport, L. Lamaignere, H. Bercegol, F. Pilon, and J. C. Birolleau, “Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm,” Opt. Express 13(25), 10163–10171 (2005).
    [Crossref] [PubMed]
  20. J. Neauport, C. Ambard, P. Cormont, N. Darbois, J. Destribats, C. Luitot, and O. Rondeau, “Subsurface damage measurement of ground fused silica parts by HF etching techniques,” Opt. Express 17(22), 20448–20456 (2009).
    [Crossref] [PubMed]
  21. W. B. Williams, B. A. Mullany, W. C. Parker, P. J. Moyer, and M. H. Randles, “Using quantum dots to tag subsurface damage in lapped and polished glass samples,” Appl. Opt. 48(27), 5155–5163 (2009).
    [Crossref] [PubMed]
  22. J. Neauport, P. Cormont, P. Legros, C. Ambard, and J. Destribats, “Imaging subsurface damage of grinded fused silica optics by confocal fluorescence microscopy,” Opt. Express 17(5), 3543–3554 (2009).
    [Crossref] [PubMed]
  23. Z. Wang, Y. L. Wu, Y. F. Dai, and S. Y. Li, “Subsurface damage distribution in the lapping process,” Appl. Opt. 47(10), 1417–1426 (2008).
    [Crossref] [PubMed]
  24. H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
    [Crossref] [PubMed]
  25. X. Li and G. Z. Qiang, “Effects of different valences of ceriumion on conformation of Horseradish Peroxidase,” J. Rare Earths 26, 857–862 (2008).
  26. C. T. Campbell and C. H. F. Peden, “Chemistry. Oxygen vacancies and catalysis on ceria surfaces,” Science 309(5735), 713–714 (2005).
    [Crossref] [PubMed]
  27. M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
    [Crossref] [PubMed]
  28. E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
    [Crossref] [PubMed]
  29. T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
    [Crossref] [PubMed]
  30. P. P. Hed, D. F. Edwards, and J. B. Davis, “Subsurface damage in optical materials: origin, measurement and removal,” in Collected papers from ASPE Spring Conference on subsurface damage in glass, Tucson, AZ (1989).
  31. J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).
  32. L. M. Cook, “Chemical processes in glass polishing,” J. Non-Cryst. Solids 120(1-3), 152–171 (1990).
    [Crossref]
  33. M. J. Cumbo, D. Fairhurst, S. D. Jacobs, and B. E. Puchebner, “Slurry particle size evolution during the polishing of optical glass,” Appl. Opt. 34(19), 3743–3755 (1995).
    [Crossref] [PubMed]

2013 (3)

2012 (1)

2011 (2)

B. Ma, Z. X. Shen, P. F. He, F. Sha, C. L. Wang, B. Wang, Y. Q. Ji, H. S. Liu, W. H. Li, and Z. S. Wang, “Evaluation and analysis of polished fused silica subsurface quality by the nanoindenter technique,” Appl. Opt. 50(9), C279–C285 (2011).
[Crossref] [PubMed]

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

2010 (1)

2009 (4)

2008 (3)

X. Li and G. Z. Qiang, “Effects of different valences of ceriumion on conformation of Horseradish Peroxidase,” J. Rare Earths 26, 857–862 (2008).

Z. Wang, Y. L. Wu, Y. F. Dai, and S. Y. Li, “Subsurface damage distribution in the lapping process,” Appl. Opt. 47(10), 1417–1426 (2008).
[Crossref] [PubMed]

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

2007 (2)

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

2006 (5)

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

J. Wang and R. L. Maier, “Surface assessment of CaF2 deep-ultraviolet and vacuum-ultraviolet optical components by the quasi-Brewster angle technique,” Appl. Opt. 45(22), 5621–5628 (2006).
[Crossref] [PubMed]

2005 (3)

1998 (3)

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

1995 (1)

1994 (1)

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

1990 (1)

L. M. Cook, “Chemical processes in glass polishing,” J. Non-Cryst. Solids 120(1-3), 152–171 (1990).
[Crossref]

1975 (1)

M. A. Weyl, “Structure of subsurface layers and their role in glass technology,” J. Non-Cryst. Solids 19, 1–25 (1975).
[Crossref]

Ambard, C.

Baldwin, A.

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Bercegol, H.

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

J. Neauport, L. Lamaignere, H. Bercegol, F. Pilon, and J. C. Birolleau, “Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm,” Opt. Express 13(25), 10163–10171 (2005).
[Crossref] [PubMed]

Bhargava, N.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Birolleau, J. C.

Bude, J. D.

Camp, D.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Camp, D. W.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Campbell, C. T.

C. T. Campbell and C. H. F. Peden, “Chemistry. Oxygen vacancies and catalysis on ceria surfaces,” Science 309(5735), 713–714 (2005).
[Crossref] [PubMed]

Carr, J.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Carr, J. W.

J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).

Cook, L. M.

L. M. Cook, “Chemical processes in glass polishing,” J. Non-Cryst. Solids 120(1-3), 152–171 (1990).
[Crossref]

Cormont, P.

Courchinoux, R.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

Coutsolelos, A. G.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Cumbo, M. J.

Dai, Y. F.

Darbois, N.

Das, M.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Davis, P.

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Delor, M.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Destribats, J.

Donval, T.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

Dovik, M.

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Duparré, A.

Evans, R.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Fairhurst, D.

Faramarzi, M. A.

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

Faure, B.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Fearon, E.

J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).

Feit, M. D.

P. E. Miller, J. D. Bude, T. I. Suratwala, N. Shen, T. A. Laurence, W. A. Steele, J. Menapace, M. D. Feit, and L. L. Wong, “Fracture-induced subbandgap absorption as a precursor to optical damage on fused silica surfaces,” Opt. Lett. 35(16), 2702–2704 (2010).
[Crossref] [PubMed]

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Feng, G. Y.

Fengrui, W.

Forootanfar, H.

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

Funkenbusch, P. D.

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

Gao, X.

Génin, F. Y.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

Golini, D.

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

Grua, P.

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

Han, J. H.

He, P. F.

Hébert, D.

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

Heckert, E. G.

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

Herffurth, T.

Hickman, J. J.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Hongjie, L.

Hutcheon, I.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Hutcheon, I. D.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).

Jacobs, S. D.

Ji, Y. Q.

Jin, H.

Josse, M. A.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

Kafentzi, M. C.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Kang, J. F.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Karakoti, A. S.

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

Kozlowski, M. R.

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

Laixi, S.

Lamaignere, L.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

J. Neauport, L. Lamaignere, H. Bercegol, F. Pilon, and J. C. Birolleau, “Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm,” Opt. Express 13(25), 10163–10171 (2005).
[Crossref] [PubMed]

Lambropoulos, J. C.

Laurence, T. A.

Lazarides, T.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Legros, P.

Li, S. Y.

Li, W. H.

Li, X.

X. Li and G. Z. Qiang, “Effects of different valences of ceriumion on conformation of Horseradish Peroxidase,” J. Rare Earths 26, 857–862 (2008).

Lindquist, A.

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

Liu, H. S.

Luitot, C.

Luo, X.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Ma, B.

Maier, R. L.

Mekmouche, Y.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Menapace, J.

P. E. Miller, J. D. Bude, T. I. Suratwala, N. Shen, T. A. Laurence, W. A. Steele, J. Menapace, M. D. Feit, and L. L. Wong, “Fracture-induced subbandgap absorption as a precursor to optical damage on fused silica surfaces,” Opt. Lett. 35(16), 2702–2704 (2010).
[Crossref] [PubMed]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Miller, P.

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Miller, P. E.

P. E. Miller, J. D. Bude, T. I. Suratwala, N. Shen, T. A. Laurence, W. A. Steele, J. Menapace, M. D. Feit, and L. L. Wong, “Fracture-induced subbandgap absorption as a precursor to optical damage on fused silica surfaces,” Opt. Lett. 35(16), 2702–2704 (2010).
[Crossref] [PubMed]

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

Morantz, P.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Morreeuw, J. P.

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

Moyer, P. J.

Mullany, B. A.

Neauport, J.

Nichols, M.

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Ohnishi, O.

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

Parker, W. C.

Patil, S.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Peden, C. H. F.

C. T. Campbell and C. H. F. Peden, “Chemistry. Oxygen vacancies and catalysis on ceria surfaces,” Science 309(5735), 713–714 (2005).
[Crossref] [PubMed]

Pilon, F.

Puchebner, B. E.

Pussacq, B.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

Qiang, G. Z.

X. Li and G. Z. Qiang, “Effects of different valences of ceriumion on conformation of Horseradish Peroxidase,” J. Rare Earths 26, 857–862 (2008).

Quesnel, D. J.

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

Raether, R.

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Randi, J. A.

Randles, M. H.

Réglier, M.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Riedel, L. M.

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Rondeau, O.

Rullier, J. L.

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

Salleo, A.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

Sazanovich, I. V.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Schmitz, D.

Schröder, S.

Seal, S.

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

Self, W. T.

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

Sha, F.

Shahverdi, A. R.

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

Sheehan, L.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Sheehan, L. M.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Shen, N.

Shen, Z. X.

Shore, P.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Simaan, A. J.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Steele, R.

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Steele, W. A.

Stephenson, D. J.

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

Summers, L. J.

J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).

Sun, X.

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

Suratwala, T.

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Suratwala, T. I.

Thomas, I.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

Tonnellier, X.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Torres, R.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Tron, T.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Trost, M.

Tünnermann, A.

Walker, D.

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

Walmer, D.

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Wang, B.

Wang, C. L.

Wang, J.

Wang, Z.

Wang, Z. S.

Wanguo, Z.

Weinstein, J. A.

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

Weyl, M. A.

M. A. Weyl, “Structure of subsurface layers and their role in glass technology,” J. Non-Cryst. Solids 19, 1–25 (1975).
[Crossref]

Williams, W. B.

Wong, L.

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

Wong, L. L.

Wu, Y. L.

Xiaodong, J.

Xiaoyan, Z.

Xin, Y.

Xinda, Z.

Yan, M.

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

Yazdi, M. T.

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

Yoshiyama, J.

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

Zhai, L. L.

Zhan, S.

Zhou, Y.

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

Appl. Opt. (7)

Biomaterials (2)

M. Das, S. Patil, N. Bhargava, J. F. Kang, L. M. Riedel, S. Seal, and J. J. Hickman, “Auto-catalytic ceria nanoparticles offer neuroprotection to adult rat spinal cord neurons,” Biomaterials 28(10), 1918–1925 (2007).
[Crossref] [PubMed]

E. G. Heckert, A. S. Karakoti, S. Seal, and W. T. Self, “The role of cerium redox state in the SOD mimetic activity of nanoceria,” Biomaterials 29(18), 2705–2709 (2008).
[Crossref] [PubMed]

Bioresour. Technol. (1)

H. Forootanfar, M. A. Faramarzi, A. R. Shahverdi, and M. T. Yazdi, “Purification and biochemical characterization of extracellular laccase from the ascomycete Paraconiothyrium variabile,” Bioresour. Technol. 102(2), 1808–1814 (2011).
[Crossref] [PubMed]

J. Am. Ceram. Soc. (1)

Y. Zhou, P. D. Funkenbusch, D. J. Quesnel, D. Golini, and A. Lindquist, “Effect of etching and imaging mode on the measurement of subsurface damage in microground optical glasses,” J. Am. Ceram. Soc. 77(12), 3277–3280 (1994).
[Crossref]

J. Am. Chem. Soc. (1)

T. Lazarides, I. V. Sazanovich, A. J. Simaan, M. C. Kafentzi, M. Delor, Y. Mekmouche, B. Faure, M. Réglier, J. A. Weinstein, A. G. Coutsolelos, and T. Tron, “Visible light-driven O2 reduction by a porphyrin-laccase system,” J. Am. Chem. Soc. 135(8), 3095–3103 (2013).
[Crossref] [PubMed]

J. Non-Cryst. Solids (4)

L. M. Cook, “Chemical processes in glass polishing,” J. Non-Cryst. Solids 120(1-3), 152–171 (1990).
[Crossref]

T. Suratwala, L. Wong, P. Miller, M. D. Feit, J. Menapace, R. Steele, P. Davis, and D. Walmer, “Sub-surface mechanical damage distribution during grinding of fused silica,” J. Non-Cryst. Solids 352(52–54), 5601–5617 (2006).
[Crossref]

M. A. Weyl, “Structure of subsurface layers and their role in glass technology,” J. Non-Cryst. Solids 19, 1–25 (1975).
[Crossref]

L. Wong, T. Suratwala, M. D. Feit, P. E. Miller, and R. Steele, “The effect of HF/NH4F etching on the morphology of surface fractures on fused silica,” J. Non-Cryst. Solids 355(13), 797–810 (2009).
[Crossref]

J. Rare Earths (1)

X. Li and G. Z. Qiang, “Effects of different valences of ceriumion on conformation of Horseradish Peroxidase,” J. Rare Earths 26, 857–862 (2008).

Opt. Express (5)

Opt. Lett. (1)

Precis. Eng. (1)

X. Sun, D. J. Stephenson, O. Ohnishi, and A. Baldwin, “An investigation into parallel and cross grinding of BK7 glass,” Precis. Eng. 30(2), 145–153 (2006).
[Crossref]

Proc. SPIE (6)

X. Tonnellier, P. Shore, X. Luo, P. Morantz, A. Baldwin, R. Evans, and D. Walker, “Wheel wear and surface subsurface qualities when precision grinding optical materials,” Proc. SPIE 6273, 61–70 (2006).
[Crossref]

J. Yoshiyama, F. Y. Génin, A. Salleo, I. Thomas, M. R. Kozlowski, L. M. Sheehan, I. D. Hutcheon, and D. W. Camp, “A study of the effects of polishing, etching, cleaving, and water leaching on the UV laser damage of fused silica,” Proc. SPIE 3244, 331–340 (1998).
[Crossref]

M. R. Kozlowski, J. Carr, I. Hutcheon, R. Torres, L. Sheehan, D. Camp, and M. Yan, “Depth profiling of polishing-induced contamination on fused silica surfaces,” Proc. SPIE 3244, 365–375 (1998).
[Crossref]

D. W. Camp, M. R. Kozlowski, L. M. Sheehan, M. Nichols, M. Dovik, R. Raether, and I. Thomas, “Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces,” Proc. SPIE 3244, 356–364 (1998).
[Crossref]

M. A. Josse, H. Bercegol, R. Courchinoux, T. Donval, L. Lamaignere, B. Pussacq, and J. L. Rullier, “Study of the evolution of mechanical defects on silica samples under laser irradiation at 355 nm,” Proc. SPIE 6403, 64030E (2006).
[Crossref]

H. Bercegol, P. Grua, D. Hébert, and J. P. Morreeuw, “Progress in the understanding of fracture related damage of fused silica,” Proc. SPIE 6720, 672003 (2007).
[Crossref]

Science (1)

C. T. Campbell and C. H. F. Peden, “Chemistry. Oxygen vacancies and catalysis on ceria surfaces,” Science 309(5735), 713–714 (2005).
[Crossref] [PubMed]

Other (2)

P. P. Hed, D. F. Edwards, and J. B. Davis, “Subsurface damage in optical materials: origin, measurement and removal,” in Collected papers from ASPE Spring Conference on subsurface damage in glass, Tucson, AZ (1989).

J. W. Carr, E. Fearon, L. J. Summers, and I. D. Hutcheon, “Subsurface damage assessment with atomic force microscopy,” in Proceedings of the 1st international conference and general meeting if the European society of precision engineering and nanotechnology, Bremen, Germany (1999).

Cited By

OSA participates in Crossref's Cited-By Linking service. Citing articles from OSA journals and other participating publishers are listed here.

Alert me when this article is cited.


Figures (9)

Fig. 1
Fig. 1 Schematic of the planetary polisher.
Fig. 2
Fig. 2 Visible absorbance spectrum of laccase-guaiacol reaction system.
Fig. 3
Fig. 3 Relationship between laccase residual activity and (a) ceria concentration (b) common impurities concentration.
Fig. 4
Fig. 4 Ceria depth profiling of (a) classical polished sample (b) MRF polished sample with biological method.
Fig. 5
Fig. 5 XPS wide distribution spectra of slurry after (a) classical polishing (b) MRF polishing.
Fig. 6
Fig. 6 Subsurface structure of (a) classical polished surface in 128.1 nm etching depth (b) MRF polished surface in 62.3 nm etching depth.
Fig. 7
Fig. 7 Etch rate and surface roughness curves of classical polished fused silica with etch depth.
Fig. 8
Fig. 8 Impurities concentration distribution along depth in (a) classical polished sample (b) MRF polished sample with SIMS method.
Fig. 9
Fig. 9 Typical SEM photograph of ceria (a) before polishing (b) after 2 h classical polishing.

Tables (1)

Tables Icon

Table 1 Sample preparation methods and surface/subsurface quality

Equations (3)

Equations on this page are rendered with MathJax. Learn more.

L ra =a+b log 10 C s
Aδ C δ V s = C s
C δ = V s Aδ 10 L ra a b

Metrics